Hi there, I hope these are what you want Head - 58 ft-lbs Cylinder Head-To-Timing Cover Bolt - 108 in-lbs Camshaft Bearing Cap Bolts - 14 ft-lbs Camshaft Sprocket Bolt - 68 ft-lbs Exhaust Mainifold Bolts - 33 ft-lbs Intake Manifold Bolts - CARB 14-28 ft-lbs, EFI 14 ft-lbs if you need anymore specs email me cyborgcharlie@Yahoo.com.au
51 FT. LBS.
I have an '84 Celica GT and it came with a 22re 2.4l
2.9kg-m/8000rpm or 20.97ft/lbs these specs come from an 84 atc250r which I believe is the same air cooled 247cc two stroke as the 83.
Nope. The license place bulb on the '84 is unique to the entire car.
Front link nuts are listed at 15-21 lbs on 2wd, and 16-21 on 4wd. 63 to 84 on the rear, unless your not putting a Ford bar back on, like say your switching to a Hellwig, then they have their own specs. If you haven't purched one yet, the Haynes manual lists all specs on this and almost everything else, I think I paid 17.00 for it, and it's worth it.
15 degrees before top dead center
Front: Strut to body: 29-40 ft. lbs. Front: Strut to knuckle: 84-98 ft. lb.s Rear: Strut to body: 12-14 ft. lb.s Rear: strut to knuckle: 65-80 ft. lb.s
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
7 pound feet = 84 inch pounds
i had my 84 supra up to 135mph. this is despite the speedometer only going up to 130mph. my buddy in his 944 turbo was pacing me.
against the devils the rangers are 99-84-15-36 in their history head to head.
84 inch pounds or 7 ft pounds.