0
Almost always, clockwise to tighten, counter clockwise to loosen. Every once in a while you will come across a left hand thread one, but rarely.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Which direction do you turn the clutch fan nut on a 2002 s-10?
Turn it counterclockwise to remove it.
How do you adjust clutch on a Honda fourwheeler?
Loosen the lock nut a few turns. Use a flat screw driver to turn the adjustment screw in the middle of the lock nut. Turn the screw CCW (in the direction the decrease play arrow points) until you feel resistance, turn it back the opposite direction a quarter turn and then turn the lock nut until its tight. This is what I read for my 2000 Rancher ES in the owners manual, but I used it on my 85 fourtrax.
Which direction does the spindle nut turn on a 2001 dodge ram 1500 4x4?
Righty tighty, lefty loosy.
In What direction turn the nut on to get off the starter?
All nuts and bolts are left hand turns.. IE anticlockwise
Which direction do you turn the axle nut to get it off on a 1994 Honda Accord LX?
If there are any threads exposed, compare them to a regulat bolt and nut. Follow the angle of the threads and position the bolt in your hand so the threads are similiar. Turn your nut, there is your answer. lefty loosey righty tighty
How do you change fan clutch on 1999 dodge ram?
Determine if it is LEFT or RIGHT hand thread, Do this by, Start motor and see which way fan turns, The fan will always turn in the direction that you need to turn the nut. If top goes toward left side of truck then turn the nut toward the left. and other for right. ,,,,,,,,,,,,,,,,, They make A special tool for removing the nut.,,,,,,,,,,,,,,,,,,,,,,,, If you have a air hammer, You can use it to turn the nut by putting it on the nut toward the side you want the nut to turn and hammer it with the tool. ,,,,,,,,, Use the tool to lightly snug the nut when you put on the new clutch, You do not have to tighten it a lot.
How do you use box wrench?
You place the wrench end over the nut and turn in a clockwise direction to tighten it or the opposite to loosen it.
Which direction do you turn the clutch fan nut to remove the fan on a 1996 Chevy vortec?
Lefty loosey, righty tighty.
How do you replace the water pump on jeep 5.2 engine is the nut that holds the fan clutch on right or left hand thread?
As you face the engine, you need to turn the nut in a counter-clockwise direction.
Which direction do you turn nut to remove saw blade on a 10inchtractor ryobi table saw?
any saw is the opposite of the way the blade spins!
In which direction do you turn the nut on the fan to remove it from the pulley on a 99 S-10?
Looking at the fan from the front you would turn it counter clock wise to remove it. You will probably need to hold the pulley from turning also.
What direction do you turn the nut on top of the air cleaner to get the cover off?
Remember "righty tighty, lefty loosy" :) or to the right it tightens the screw to the left it loosens it up.
