Cleaning

Actually there is wood that burns, like firewood. In campfires, or outdoor cooking, wood in the form of dead twigs are also used to sustain the fire. Anyway, for wood that does not burn, it is because of the water in the wood. Wood is hydrated, since trees and plants take water up through their roots and through the stem/trunk/branches to the leaves, which require water for photosynthesis. This hydration prevents wood from burning due to the heat capacity of water and the latent heat of evaporation of water. The heat energy relased by a flame used to try to ignite the wood would therefore first need to remove the water from the wood before it will combust.

Place a paper towel over the wax and apply a heated iron over it. The wax will melt and get absorbed by the paper towel. Repeat the process with a clean paper towel until the wax is completely removed. If any residue remains, apply a stain remover and wash the jeans as usual.

3 things come under cleaning fluid:

1. Solvent based fluid: include mineral spirits, GOO GONE® cleaning fluid, 91% isopropyl (rubbing) alcohol, denatured alcohol solvent, tri-chlor, electric motor cleaner, carburetor cleaning fluid, Hampton Hobby Products™ track cleaning fluid, etc.

2. Oil based fluid: include Wahl™ Clipper oil, 3-In-One™ oil, Rail Zip™, transmission oil, etc.

3. Water based fluid: include Fantastic™, Windex™, 409™ and products such as "Blue Liquid" track cleaner.

Inhaling chemicals from Airwick products is not a safe way to get high and can be harmful or fatal. It can lead to serious health issues, including damage to the brain, heart, lungs, and kidneys. It is important to always use products as intended and avoid any form of substance abuse.

There is no single "number 1" stain remover as effectiveness can vary depending on the type of stain and fabric. Some popular options include oxygen-based bleaches, enzyme-based cleaners, and products containing hydrogen peroxide or baking soda. It's best to choose a stain remover that is suitable for the specific type of stain you're dealing with.

One effective solvent for removing rust stains is white vinegar. Simply soak a cloth in vinegar and place it over the rust stain. Let it sit for a few hours before scrubbing the area with a brush or cloth. Repeat as needed until the rust stain is removed.

To conduct a science experiment comparing paper towels' absorbency, you can cut equal-sized pieces of different brands of paper towels and place them on a flat surface. Then, slowly pour water onto each piece of paper towel and measure how much water it can absorb before reaching saturation. The paper towel that absorbs the most water before reaching saturation can be considered the most absorbent.

A detergent bar is used to clean clothes and remove dirt and stains during the laundry process. It contains surfactants and other cleaning agents that help in breaking down and removing grease, grime, and dirt from fabrics. It is a convenient and cost-effective way to wash clothes by hand or in a washing machine.

If you are making a pen for tagging with, you could make a simple ink that will stain surfaces and become what we would call "Unbuffable."

First, you basically get a paint that you want to use as the colour of the ink, make sure the paint is not acryllic. I would just choose a basic colour if this is your first time making an ink.

Secondly, get some paint thinner and get your paint, mix the two till it is half paint half thinner.

The reason we want the ink to be thin is so that it can seep through the nib of our pen.

Now we add the item to our mix that will make the tag unbuffable, we use a basic oil such as fish oil and add that to our recipe so that it is a 2/3 paint and thinner and 1/3 oil.

God knows how this works, but I've been making pens for a good couple of years now and this is probably my favourite but most basic pen.

I learned a lot of recipes from my mates and from the internet.

So keep searching graffiti writers (Y) peace.

Another Chemical you can add to your inks is acetone. It beats the buff six times over but be careful when using it because it may burn your skin.

To make alcohol based ink you will need...

1. around 30-50 biros

2. alcohol base(this can range from 70% rubbing alcohol to pure ethanol)

3. nail pollish remover or acetone (optional)

4. fish oil capsules (optional, try to get odourless ones because they made my ink smell like fish(( can be replaced by WD-40 or RP-7, i find they smell a little bit better than fish oil!))

5. a large plastic bottle to mix the ink in

-method-

1. pour enough alcohol into your bottle to half-fill it

2. extract the ink tubes from the biros an put them in the bottle.(you should see all the alcohol changing to whatever colour the ink is in the biros

3. add you choice of stainers( i would use mostly acetone and fish oil capsules)

4. put the cap on and shake it up so it all mixes together.

5. wait maybe 30 minutes for the ink to draw from the pens

6. WREAK HAVOK ON YOUR NEIGHBOURHOOD!, muah ha ha!

if you have any questions or need help just ask me

Unfortunately, once bleach has caused a stain on shoes, it is difficult to remove it completely. You can try to cover up the stain with a marker or paint that matches the color of the shoe, but it may not completely erase the bleach stain. It's always a good idea to test any cleaning solution in a hidden area of the shoe first to ensure it doesn't cause further damage.

Vinegar (acetic acid - C2H4O2), nail polish remover (acetone - C3H6O) and sugar (sucrose C12H22O11) all consist of the elements carbon, hydrogen and oxygen chemically bonded in different proportions.

try using mr clean

Dry erase marker on a smart board?

This is why I don't like to see white boards next to smart boards. The white board markers are very easy to confuse with the non marking smart board markers.

Use a wet rag to remove the dry erase marker from your smart board and then, paint the dry erase markers a neon orange so that they can be easily identified.

For those of you who may not know what a smart board is, it is a screen that uses a projection generated by a pc to see an overhead display. It has a rougher surface than a dry erase board so special markers are supplied with the board that will only be visible on the smart board.

To remove silly putty from carpet, you can place ice in a plastic bag on top of the silly putty to harden it. Then, carefully scrape off the hardened putty with a dull knife or spoon. Any residue can be treated with a mixture of dish soap and warm water, followed by blotting with a clean cloth.

HE compatible laundry detergent is formulated specifically for high-efficiency washing machines. These detergents produce fewer suds, which helps prevent excess residue in HE machines and allows for more efficient cleaning. It is important to use HE detergents in these machines to avoid potential issues and ensure optimal performance.

Because toothpaste has to be safe to put in your mouth, it's also fairly safe for fabrics. You should be able to rinse it out, or just wash the clothing as you normally would. If you have an intense whitening toothpaste and it has whitened your clothes, that will not come out because it is missing some of the original dye.

The oldest dish detergent is believed to be soap, which has been used for cleaning dishes for centuries. Soap is a natural surfactant that helps to break down grease and grime on dishes when combined with water.

Titanium dioxide is a common white pigment used as a dye in various industries, including cosmetics and food. It is known for its bright white color and is often used to provide opacity and brightness to products.

If you look at the scientific name for them (permanent markers) you'll notice that, by name, they're permanent; thus making them permanent. The fact that they are permanent is best shown by the fact that they are called "Permanent Markers."

To remove permanent marker from a blanket, try using rubbing alcohol or a mixture of vinegar and water. Dab the stain with the solution and then gently blot it with a clean cloth. Repeat until the stain is gone, then wash the blanket according to the care instructions.

Yes, mold can be removed from clothing. To remove mold, wash the clothing in hot water with detergent and add a cup of white vinegar or bleach to the wash cycle. Alternatively, you can use a commercial mold remover specifically designed for clothing. Make sure to dry the clothing thoroughly in the sun to prevent mold from returning.

OxiClean is a good stain remover because it contains oxygen-based bleach that helps break down and lift stains from fabrics without damaging them. It is effective on a wide range of stains and can be used on both whites and colors. Additionally, OxiClean is versatile and can be used in various forms, such as powder, liquid, or spray, making it convenient for different cleaning needs.

Yes, sniffing permanent markers can cause dizziness, hallucinations, and even a feeling of being "high" due to the chemicals in the markers that can be harmful when inhaled. Prolonged or frequent sniffing of markers can lead to serious health effects, including damage to the brain, liver, and kidneys. It is important to avoid inhaling markers and use them in a well-ventilated area.

Try using a penetrating oil like WD-40 or PB Blaster to help loosen the rust. Let the oil sit on the bolt for a few hours before attempting to remove it with a wrench or pliers. If the bolt still won't budge, heat it up with a blowtorch to help break the rust seal.

An iron is hot in order to turn the water you put in it into steam. The steam is the key ingredient here. Basically you're making the fabric hot and damp, and using the weight of the iron to flatten out creases. The steam and warmth helps the fabric fibers to relax whatever shape they've gotten bent into.

sparkle is more of a dollar store brand kind of a paper towel . Scott is more of a wal-mart brand. Scott is the strongest brand out of the two because it's upper class-er than sparkle