Cable Internet

Burger king (bk) used in cctv, lcd,plasma, networking,in digi-key,etc..

There are a number of factors involved in download speeds, the least of which is your service provider (usually). The following problems could occur:

1) Your computer is low on memory, and needs to have some freed up. Try closing some programs, or restarting your computer.

2) Your computer is running too many programs, and should have some closed to free up CPU time. Try closing some programs, or restarting your computer.

3) Your network stack has too many filters/drivers/etc. You might need to configure your TCP/IP stack. Try updating your network drivers, and restarting your computer.

4) Your network switch is bogged down from too much local network traffic. Check to see if there's a high use load, and if so, try again later (or track down the cause of the bandwidth usage).

5) Your network switch may need a restart (usually due to low memory conditions). Try restarting the switch by powering it off for at least 15 seconds.

6) Your broadband modem may need a restart (usually due to low memory conditions). Try restarting the modem by powering it off for at least 15 seconds.

7) Your ISP's routers may be running poorly. A trace route command will confirm or deny this condition. If one particular hop on a router is dropping packets and/or has a high response time, that suggests an Internet-related issue. It may also clear up on its own.

8) Your ISP is blocking some of your traffic. This happened with Comcast customers at some point, and I'm sure that there are others that block download traffic without advising their customers. Try talking to them about it.

9) The remote network is bogged down; try again later or contact the remote party to see if they have bandwidth issues; alternatively, they might simply have a lower bandwidth (i.e. dialup). You may need to simply be patient or try another source.

10) The remote host is having any of the problems above (particularly 1 through 3). See if you can't get someone on the far end to diagnose it, or restart the system.

Task Manager, Remote Desktop, trace route, and ping are all useful commands to determine the cause of an extremely slow connection. There are many factors involved, but with a few minutes of troubleshooting, you should be back up to speed (pun intended) in no time.

Thomas Edison invented multiplexing to transmit several telegraph messages over a single line. That was the 19th century, two centuries ago. The technique is still used! Edison was a smart man. He read almost every book in the Detroit Public Library. He invented several thousand products.

No, the modem is already a router itself. the 2wire is an AP (access point) for 802.11b and 802.11g wireless standards.

also it has 4 ports on the back for 4 wired devices.

Do it manually.If it doesn't work use troubleshooting modems, you will get the all the instructions there.

You can check your internet speed by using Scanmyspeed.com .

Ethernet cable

In MS Windows, you look in the Network Neighbourhood for any and all machines on your network, including other computers, routers, printers and so on.

No. The PS3 can only have a wired connection with an ethernet cable. The only other connection that is possible is WiFi. The PS3 can only connect to the internet with WiFi or ethernet cable no other type connection is possible. You can not use the HDMI or USB port to connect the PS3 to the internet. I do not believe a router can be connected to the internet cable without a modem or that you can have cable internet without a modem

It transmits signals faster downstream toward the user than upstream to the server

first of all i think i downloaded the wrong bin file for my receive but now my receiver wont work i have turned it on from the master switch in the back and at the same time i have pressed the power button in the front and i comes up in the front display screen boot and does nothing else please can u send me the information how to fix it asap Jim vickers

Well you would need money... You could get entertainment, order food, etc. But what about actually eating and drinking?

Hair Extensions.

vacuum cleaner

ans. 3 nand gates

resoon :-

OR GATE :- x+y

NAND GATE :- x'+y'

LOGIC :-so the logic is is we apply NAND to the inputs x' and y' instead of xand y we would get x+y

DESIGN PROCEDURE

1. for inverting the input x and y can be done by NAND gates ,

2. take a NAND gate and pass both x in both the inputs it means x NAND x gives you x'

3. follow similar procedure for inverting y

4. and then all the outputs of those NAND gates as the inputs of another NAND gate

16 bit ms dos subsystem errore

AND-OR

One could purchase a Motorola Surfboard SB5120 cable modem on Motorola's website or other retailers' websites such as Amazon, eBay, etc. It is easier to look for the modem in its own site.

transceiver

This is normally a sign of a failed component, Call a repairman or trash it.

No. A router is a special kind of computer. "PC" means "personal computer"; this is another kind of computer.

No. A router is a special kind of computer. "PC" means "personal computer"; this is another kind of computer.

No. A router is a special kind of computer. "PC" means "personal computer"; this is another kind of computer.

No. A router is a special kind of computer. "PC" means "personal computer"; this is another kind of computer.

IEEE 802.11d is supplementary to the Media Access Control (MAC) layer in 802.11 to promote worldwide use of 802.11 WLANs. It will allow access points to communicate information on the permissible radio channels with acceptable power levels for user devices. The 802.11 standards cannot legally operate in some countries; the purpose of 11d is to add features and restrictions to allow WLANs to operate within the rules of these countries. Comments: In countries where the physical layer radio requirements are different from those in North America, the use of WLANs is lagging behind. Equipment manufacturers do not want to produce a wide variety of country-specific products and users that travel do not want a bag full of country-specific WLAN PC cards. The outcome will be country-specific firmware solutions.

A NAND gate can be used as an oscillator or as an amplifier in a very rudimentary transmitter. (If both inputs of a NAND gate are tied together, it inverts the incoming signal. Chain two NANDs together with the outputs fed back through a crystal and you have a quick, easy oscillator. Chain another NAND or two or three with the inputs tied together and the output right into another NAND and you have a simple low power amplifier.)