Computer Keyboards

The home row is the main section of a keyboard, it is the middle row of the keyboard.

while pressing shift press the button with the slash on it

There are two technologies in the way the keys of a keyboard make contact: foil contact and metal contact. The foil contact keyboard has two layers of foil that when you press a key makes a contact and close a circuit. When it's released a small spring under keycap raises the key. The metal contact keyboard uses two metal plates to make contact, and again a spring under keycap raises the key when it's released. Metal contact keyboards give the keystroke clear and definitive contact.

IYes t depends on the brand of the monitor and tower, if it the same then yes but if theyre different, for example: dell and gateway, there can be compatability issues if drivers are not available.

Press the Num Lock key. It's in the top left of the keypad on my keyboard.

On a computer keyboard, first turn the Numlock on. Then hold the Alt key down. Keeping it held, type 248 on the numeric keypad, not the numbers across the top of your keyboard. Then let go of Alt. You should get a degrees symbol, like this: °

No, it just reverses the capital system so that normal typing is CAPITALS and if you hold shift it changes it to lowercase letters.

it is made of segments

colon plus capital P - :P

I'm pretty sure it's in G. Hope that helped!

On a Mac nothing happens. Command + X cuts the selected item. On a Windows PC control + x will cut the selected item.

All Korg TRITON keyboards use Korg's HI Synthesis tone generator. Each keyboard can be upgraded in a number of ways and as a result, they are very popular with musicians.

╭∩╮（︶︿︶）╭∩╮

or

....................../´¯/)

....................,/¯../

.................../..../

............./´¯/'...'/´¯¯`·¸

........../'/.../..../......./¨¯\

........('(...´...´.... ¯~/'...')

.........\.................'...../

..........''...\.......... _.·´

............\..............(

..............\.............\...

A great question!

We hear much about digital and analog signals and most people know nothing about the difference. Let's try to give some simple basics.

A digital piece of electronics is either on, or it is off, Black or white with no gray in between. Early electrical devices used 5 volts circuitry. If the five volts was there, we had a digital "on" condition. If the 5 volts was not there, we had a digital "off" condition. We could use this in many ways. One way was to call the "on" condition a mathematical "1" and the ansence if the voltage a "0". That means we could make electrical devices count to one! BIG DEAL? well, yes it was because that is how every computer out there works, as well as how the internet transfers all this cool stuff!

Analog is everything in between the "0" and the "1" of digital electronics. This an probably the most interesting area for most engineers that really know electronics. You may be able to save audio information in digital form, but your ear sure wants to hear it in analog. The ability to vary voltages between the full on and off of the divice requires more currents and more design abilities. All actual transmission of every radio or television signal is done through and analog transmitter. When you hear about the end of analog television and the new digital transmission, they are actually discussing the input to the analog transmitter.

The ability to decode digital transmissions on this analog signal allows us to use much more of the transmission band for the given device. A television signal that could only put out maybe 7 signals in analog now can carry many signals. That television station you are watching could also be sending a great deal of other information out! Even in analog we could send a dozen different things out "behind" that signal you could hear and see. "Muzak" (the elevator music) goes out "behind" these tv or radio signals (called sub carriers). Digital encoding of this information allows for many many times the sub carriers on a given station.

A symbol name that can be displayed on a keyboard might include the pound sign or the number symbol. The dollar symbol can also be displayed on the keyboard.

press ctrl alt delete at the same time. in the lower right hand corner is a red button that looks like the power symbol. click on it to shut down the computer.

You might need to install additional drivers for your computer to make use of the media controls

There are no toxins in keyboards, but using toxins as keyboard cleaners is a popular method for keeping keyboards clean.

28 1/2 inches from the floor to the top of the white keys!

2 son!

A virtual keyboard differs from a touch typing keyboard because a virtual keyboard is on touch sensitive screen (like on the iphone) rather a hardware keyboard that some people prefer.

The F Lock on a keyboard disables the use of function keys. E.G: F1 F2 F3 etc.

Because when ppl used it they would say curse word and be rude but I think they should have made those ppl use safe chat but im really not sure.

The width of a key on a keyboard varies with the design of the keyboard. Laptop computers commonly have slightly smaller keys. 1.6 centimeters or 5/8 of an inch is common. Actually, the measurement that is used isn't the width of they key, but the key pitch , that is the measurement of the distance between the centers of the keys. The recommende key pitch is 18 to 19 mm Also, some keys are wider than others, commonly the Shift, Return and Enter keys. But again this will vary.

well it is the same because if you go on alot you will remaber it ok good toodles