Electronics Engineering

change in load voltage or output voltage changes in load current

peak inverse voltage... piv of semiconductor is impoetant bcz we need to know after a peak voltage the diode get breakdown or damaged... so we need to know the peak voltage. piv is a point which withstands the maximum reverse biased voltage. after which the diode get damaged.

Fukken hoped you would tell me that.

A DC power supply supplies directional current in an electric motor. This is significant because many motors run on directional current, or DC power; it's easier to convert to kinetic energy than alternating current (AC), which is generally used to transmit power over long distances.

Characteristics of parallel connection.

I have no idea i have tried this myself and as it is a discontinued product there is not any anywhere, sorry!

semiconductors

Ground (0 v) is reference

azlum

to maintain the constant frequency and the phase parameters at the output

hariram very poor boy and middle class family. i love pathmappriya.

With dc the electrons flow in one direction steadily, but in ac the electrons change directions 50 or 60 times every second. 50 in Europe, 60 in America.

Yes, but only for a very brief period of time.

I am very much interested in optical communication when i studied 12th standard..i also want to know some concepts of software..so,i choose electronics and communication,which will support both hardware and software field..

Its all electrical, but referring to electronics would be solid state devices such as tiny resistors ,tranistors soldering work found on devices such as Computer chips and Vehicle ECU's

You need 3 main things: An iron core, a roll of insulated copper wire and your source of electricity

Firstly find a suitable iron core a iron nail will do (6in 15cm) next wrap the wire (thicker is better) as neatly and tightly as you can around the iron nail.

Once the iron is wrapped up tight make sure you have a piece of copper wire comin off each end one where you began the other where you finished wrapping.

Now all you need to do is connect it to your battery which terminal you connect each wire will determine current flow.

The power of your electromagnet will depend on the wrapping of copperbut mainly the battery and the current it puts out to great a current will heat the wire quickly but a 9 or 12v battery should be fine.

because TTL have a bias input setup to eliminate noise therefore the output will follow the logic one input if left open

Decrease, because W = I (current) x V (voltage), if one increases, the other decreases in proportion to the increase of the other. Ohm's Law states current is directly proportional to the applied voltage and inversely proportional to the resistance of the circuit.

1958. It came into common use in the early 1970s.

DIP stands for Dual Inline Package. Most often, the pins are on 0.1 inch centers, with two rows of pins that are either on 0.3 inch centers or 0.6 inch centers.

Action potentials along the muscle fibers

An oil filled capacitor is used in (PSC) motor because the capacitor is in the circuit the whole time the machine is running. The capacitor is oil filled to cool it due to being in circuit the whole time

The frequency with which the carrier frequency is deviated is exactly the modulating frequency,

i.e. the frequency of the sound that makes up the music or voice announcement, stereo pilot,

SCA subcarrier, etc.

I = V/R 5 volts / 2600 ohms = .00192 or round to .002.

• A meridional ray is a ray that passes through the axis of an optical fiber.
• A skew ray is a ray that travels in a non-planar zig-zag path and never crosses the axis of an optical fiber.

CLASS -C amplifier is having high ditortion due to which they are not used in audio frequency work