Flooring

26.5 well 27 since you can't get half a tile

It could.

[1] The great room harks back to the great hall of medieval castles. [2] So it's an all-in-one, multi-purpose room within a house. Typically, it serves as a den, family, living, study, TV room. It tends to be centrally located, and to have raised ceilings.

It shouldn't be done. Carpet underlay is usually to thick and flexible and won't provide the needed support under the laminate. It will flex too much causing it to break apart. you should check on the box what type of underlay is recommended for that specific product. There are as many types of underlay as there are laminates.

1 "square" is an old imperial unit of measurement referring to 100 square feet.

The length of a foot is 0.3048 m (or 30.48 cm).

To convert square feet to square metres, do the following:

1 ft2 = 1 ft * 1 ft

= 0.3048 m * 0.3048 m

= 0.09290304 m2

Therefore, to calculate 100 ft2, simply multiply that answer by 100.

100 * 0.09290304 m2 = 9.290304 m^2

Now, you can multiply that answer by the number of squares to get your final answer.

A room measuring 20' x 20' = 400 square feet

Use a floor neutralizer with a PH of 8. Use a mop, just like you were mopping. Do not mix it with a cleaner, though. After mopping with the neutralizer, clean the floor with a neutral cleaner.

a nail designed to penetrate concrete and hold

Daily cleanings should include sweeping and damp cloth wiping. A variety of daily cleaners are available; my own favorite is Dupont Stonetech Revitalizer, but there are many others. Miracle Sealants makes a good one, too. To really get the tile clean you will want to use a mildly acidic cleaner but these should not be used frequently as over time they will damage the grout, the base mortar, and perhaps even the tile. If, after installation, your tile looks icky and dirty and has white residue, you will need a grout haze remover. Follow the directions carefully to minimize damage to the grout. Significant buildup of wax, sealant, etc., can be removed with Citristrip, available at most large hardware stores. After using haze remover, Citristrip, or other harsh products, you will want to reseal the tile. I use Miracle Sealant "511 Impregnator."

If you have contineous tripping on a breaker then there is a fault on the load of that breaker. Don't reset it any more. What is the breaker connected to?

In order to fully answer that question you would need to know the exact size of the home. You will want to budget at least $2.80 for a carpet, $.60 for pad, and labor will depend on the size and scope of job.

This largely depends on the material the carpet is made out of. Other factors that contribute to weight are how thick the carpet it is, and how dense the carpet fibers are.

Scrape off carefully with a very sharp craft knife with blade held almost parallel to the floor.

The cost will be 3360.00 for all 4 rooms (4 x 35 sq yd = 140 square yards).

Area = L x W = 21 x 15 = 315 square feet.

Divide by 9 to get 35 square yards per room.

Multiply 35 x 24.00 = 840.00 and times 4 rooms is 3360.00

You cannot, without information about the width.

Maintaining a clean carpet is important for several reasons. It is important to keep your carpet clean to promote the longevity of your carpet. A clean, well maintained carpet will last longer than a carpet left alone. Dirty carpets can increase the chance of bacteria growth. Moisture trapped in the padding can deteriorate the carpet from the underneath. Mold and mildew from moisture can cause a carpet to lift, create uneven carpeting. Regular vacuuming is a key factor. Also, wearing socks rather than going barefoot on the carpet will help prevent staining in the hallways.

There are several options when it comes to cleaning carpet. Professional carpet cleaners are abundant. They can also be costly. One room can cost anywhere from $80 to $100. There might be added fees for various cleaning add-ons. Scheduling can also cause problems in having a professional carpet cleaner visit your home. You have to work around their availability and make plans to be home when they arrive. Another issue could be in the actual cleaning product used. Is it strong enough to remove stains? Is it watered down? Will it prevent mold growth? Is it green? What happens in the event that stains treated reappear? Phantom stains can be very common in carpeting. If a stain seems to be gone, but then reappears days or weeks later, will the professional carpet cleaner come back to treat it again, and if so will they charge?

Carpet cleaning can actually be done quite easily and cost effectively on your own. Using the right equipment and cleaning solution, you can properly clean your carpets for a fraction of the price it costs to hire a professional, and in most cases get a better clean. This can be essential in maintaining your home, preparing a home for sale or for ensuring you get a security deposit back from a rental unit.

Carpet cleaning machines have become quite affordable, and easy to store. Manufacturers like Hoover and Bissell produce a wide range of carpet cleaning machines. These machines range from upright units to hand held tools. Various features are available to enhance the cleaning experience. Various brush types and bristles help to agitate the carpet to break apart stained surfaces. Heat features allow the user to increase water temperature for deeper cleaning. Attachments of machines make it easy to not just clean carpets, but rugs, upholstery, curtains, steps and more. These types of machines are perfect for families with children and pets. The availability of having this type of machine in the home makes it easy to take care of stains as they happen.

Choosing the right cleaning product for cleaning carpets is crucial. There are a number of products available. From household cleaners to enzymes, the market is saturated with various types of cleaners. There are a number of factors to consider in ensuring you use the right cleaner.

The vast majority of carpet cleaning solutions are soap based. Soap based cleaners are not necessarily the best types of cleaners for carpeting. Soaps are designed to attract dirt, grease and so on. When soap is introduced into carpet, it can create areas under the surface where the dirt gets collected. When this happens, phantom stains can become prominent. A phantom stain is a stain that seems to be removed only to appear later in time. This is a result of dirt and grime not being properly removed below the surface of the carpet. As time passes, humidity or moisture in carpet can bring the stain upward. This type of stain is most common with soap based cleaners as the soap creates areas where the dirt may be left behind. Other problems can also arise from soap based cleaners. The foaming and suds make it very difficult to rinse. As more water is added to rinse, the soap cleaner foams more. In turn, it becomes harder to remove and leaves an oily film throughout the carpet.

Natural household cleaners are suggested in many cases to clean carpet. While cleaner like ammonia and vinegar are excellent cleaners, they are not a good idea for carpet. Both are acidic in nature. Because of this, they have a high pH level. This level of acidity is what makes them good at breaking down stains. The issue however comes with the odor, especially if you are a pet owner. When pet owners run into an issue where either a cat or dog repeatedly goes to the bathroom on carpet, it is not necessarily a training issue. Often it comes from a vinegar, ammonia or a cleaning product containing either of them being used on the carpet. Animals urinate instinctively based on scent. The pH levels in ammonia and vinegar are similar to those found in urine. Because of this, when an animal smells it in the carpet, they are likely to think that is the spot where they went to the bathroom last. In turn, they will continue to go in that spot.

Enzymatic cleaners are another available cleaner type suggested for carpet cleaning. Enzymes are quite possibly the least likely cleaner to remove stains. Enzymes are extremely sensitive. They rely on the principal that one compound will interact with another. However for an enzyme to work, the conditions must be precise. Enzymes only become active when introduced to the right compounds. Because of this, it is more likely than not the enzyme will not work as expected. Enzymes are best illustrated in comparison to a lock and key. Not every key works with every lock. The key has to be designed to fit the lock correctly for it to be activated. If there was one lock and a hundred keys, only one specific key will open the lock. Enzymes work the same way. In treating pet stains, there are so many variables that can prevent the enzyme from breaking down the stain. pH levels, diet, health and so on alter the way the stain interacts with the enzyme. Likewise, blood, urine, vomit and other stains all have different chemical compositions. The thought that a general enzyme can be used for all of these is ridiculous. On top of the actual composition of the stain, other factors can prevent enzymes from working. This includes temperature, moisture, interaction from chemistry in the carpet or the previous application of other cleaners.

The best way to properly clean carpets in a machine is by using a surfactant based cleaner. The proper surfactant will work with water to make the stains in carpet and the fibers water soluble. When a stain becomes water soluble, it can then be broken down. Once a stain is broken down, it can be rinsed away. A good surfactant, like Genesis 950 will also disinfect and kill bacteria. This does more than just remove stains, but it kills and destroys odors in the carpet as well as the padding. For pet owners, destroying odors in the carpet stops pets from going in that spot. Allergy sufferers can also breathe easier as pollen and mold are broken down and removed from carpet. Being a green cleaner, and relying on the aid of water, it will not damage your carpet in any way. Nor will it leave behind any soapy suds, harmful chemicals or unwanted stains.

For the best carpet cleaning, use the surfactant in the carpet cleaning machine with the proper dilution of water. There are two basic types of carpet cleaning machines. There are machines that have two compartments - one for water and solution, and machines that have one compartment where the water and solution are mixed together. The machines with 2 compartments are the easiest to use as far as mixing the solution and water. Simply pour the solution in the proper compartment and the water in the other. These machines allow the user to select a setting ranging from low to heavy. Your selection will determine how much solution is used. For general cleaning, the low setting is best. For heavy cleaning involving harsh stains or pet stains, the high setting will be best. In machines where the solution and water are mixed, you can select how much solution to use based on your cleaning needs. Genesis 950 for example recommends a mixture of 1 part 950 to 7 parts water for general cleaning. For pet stains or hard setting stains, this can be increased up to a 50/50 mix.

To properly clean your carpet, slowly go over the carpet using the machine on the required setting with the desired amount of cleaning solution. Take your time ensuring the solution is dispersed thoroughly. Allow the carpet to be saturated. In cases where there are odors or heavy stains, be sure the mixture is being released slowly enough that it goes into the padding. This will allow the cleaning solution and water mix to disinfect and deodorize the padding.

After the carpeted areas have been cleaned, rinse the carpet using only water. Generally machines with two compartments have a rinse setting. For machines with one compartment, fill that compartment with straight, clean water. Slowly rinse the areas you have cleaned with the cleaning solution. As you rinse, the clean water will flush out and remove everything that has been broken down and lifted from the carpet. When using a surfactant based cleaner, you will see the return water come up murky and brackish, especially if the carpet had not been cleaned for sometime or if the cleaning is taking place in a high traffic area or where there was bad staining. Rinsing can be continued until the water begins to come up clear, or until you are satisfied with the results.

Once the carpet has been cleaned and rinsed, allow the carpet to dry. Fans and dehumidifiers can aid in speeding the drying process up. One nice thing about a cleaner like Genesis 950 is that as the carpet dries, the antibacterial agents in it will prevent bacteria or mold growth from forming as the moisture in the carpet dries. While drying, avoid walking on the carpet.

264

There are 9 square feet in a square yard, so divide the price per square yard by 9.

30.98/9=3.44222222222

Because you are black!

76

Based off of the instructions available for caring for the floor provided by Amtico, it suggests not using steam mops on this flooring. These mops could cause damage to the flooring and cause adhesives to fail.

100000 feet is approximately 28333.3 yards