Flooring

Measure the length and the width of the room in yards (to convert feet to yards divide by 3) then multiple the two lengths and then add 10% extra as overage.

You can't calculate linear footage based on square yardage alone. If you meant square footage it will cover 810 sq. ft..

There are 12.22 square yards in 110 square feet. (12 2/9 sq. yd)

There are 9 square feet in a square yard,

and 110 / 9 = 12.22

Yes, a concrete patio step does in fact need to be on a footing. Without the proper footing foundation, the step will be uneven.

Just over 191 sq ft

0.00068870524 acre 2.7870912 square meter 4,320 square inch 0.00068870524 acre 2.7870912 square meter 4,320 square inch

348 square feet are 38.666667 square yards.

Well a square yard is 3x3=9 and 12x12=144 so 144 divided by 9=?

You can install the vanity first. Then, install the tile up to the vanity and around the pipe for the toilet. Then, install the toilet. That way, you do not have to replace the tile should you ever have to replace the toilet.

Slate tile requires more prep and skill to install, which usually makes it more expensive to install. It will very by region, but $7 to $9 per sq foot.

The area of 15 feet times 14 feet = 210 square feet.

222 sq.ft.

Leveling a house with piers is usually a job for an expert. The house may need to be raised with a jack in one place, then wooden shims must be fitted in between the floor and the piers. Each adjustment must be checked with a level to make sure it is done right.

A 3x12 room is 36 square feet. This means that to fill the floor in the 3x12 room, it will take 36 tiles that are each 1 square foot (12x12) in size.

154

you can hide some leveling issues with the grout, but if it's really noticeable then the surface wasn't leveled out first (self-leveling concrete) or the person laying the tile didn't know what he was doing. the good thing about tile is that you can chip out the bad area, reset new tile and re-grout to fix it. you don't have to tear out the whole room or counter

I pay my subcontract installers $5 per foot on if over 100 sq foot. They provide labor, all tools, thinset and clean up. They must be insured for $250k. (located in CT. would vary by area I'd guess)

Keep in mind that is the price for a contractor paying a sub contractor. I tack my profit on top of that.

Any other work such as adding a layer of subfloor is extra.

times the two numbers together and that is your answer.If you don't get 360 sq ft then cancel the order

If you ignore them for a while. Many of them will take care of them selfs as the wood expands and contracts with the weather.

Kitchen is 12 x 20 which is 240 sq ft. 9sq ft = 1sq yd 240sq ft/9sq ft = 26.6667 sq yds 26.6667 sq yds x $8.91 per sq yd = $237.60

I pay my subcontract installers $5 per foot on if over 100 sq foot. They provide labor, all tools, thinset and clean up. They must be insured for $250k. (located in CT. would vary by area I'd guess)

Keep in mind that is the price for a contractor paying a sub contractor. I tack my profit on top of that.

Any other work such as adding a layer of subfloor is extra.

Tile, cork, vinyl, laminate, carpet and engineered flooring.

You can clean sap off of linoleum with regular dish soap. With a solution of dish soap, water, elbow grease, and a scrub brush, you can generally remove the sap from the area. If that doesn't work, try one of the adhesive removers from your local store.

Sky blue, white, and pink seem to work well with lime green. Also Pink! and Fluro Yellow as they look wow! there very eyecatching colours!