Flooring

I pay my subcontract installers $5 per foot on if over 100 sq foot. They provide labor, all tools, thinset and clean up. They must be insured for $250k. (located in CT. would vary by area I'd guess)

Keep in mind that is the price for a contractor paying a sub contractor. I tack my profit on top of that.

Any other work such as adding a layer of subfloor is extra.

Tile, cork, vinyl, laminate, carpet and engineered flooring.

You can clean sap off of linoleum with regular dish soap. With a solution of dish soap, water, elbow grease, and a scrub brush, you can generally remove the sap from the area. If that doesn't work, try one of the adhesive removers from your local store.

Sky blue, white, and pink seem to work well with lime green. Also Pink! and Fluro Yellow as they look wow! there very eyecatching colours!

try lighter fluid and a terry cloth. it worked for me. obviously be careful, have good ventilation, and wear good knee pads. -AZ_ivan

10 times 10 = 100 square feet why are you so dumb

126.3125 square feet

Measure from one corner to the diagonal corner, and then switch and measure the other 2 diagonal corners. If the measurements are the same, then the walls are at right-angles to each other.

An 18-inch square tile is 1.5 feet on a side. So the area of each tile 1.52 = is 2.25 square feet. The room is 8 x 18 = 144 square feet. Divide 144 by 2.25 to get 64 tiles, which is your answer if your question is a pure math one (like on a test or homework assignment). But if you're really tiling a room, you will have to buy more, to account for breakage and cutting the half tiles around the perimeter. Most professionals say to add five or even ten percent, so you should buy about 70 tiles. You can always return any unopened boxes.

16" 19.2" and 24" are the standards, because they will all divide evenly into a sheet of plywood deck

mr graf is always wrong

Yes it does it will also depend on the material of the tile and exactly what you mean by small tile a 34 will probably be more expensive than 6 because of the difficulty of laying the material evenly.

Yes, but it would have to be floating engineered wood.

20 sq. yards is 180 sq. ft. so it will cost you $234.

There are 9 sq.ft. in each sq. yard so 117 sq.ft.

A square foot is 12in x 12in or 144 sq. in.

40 Square Yards and Usually you want some overage so about 44 yards.

Many people use ceramic tile in the kitchen; however, I believe laminate flooring is the best option unless your kitchen is just a showcase and not often used. Vinyl flooring (aka-linoleum) is a cheap alternative but it looks like a cheap alternative. Each surface has pros and cons so the choice is really about what is right for your home. Vinyl

you have to add something to the equation:

how wide is the object that you are measuring lineal feet of? if it is 12" wide, you need 650 lineal feet to come up with 650 square feet, if it is 4" wide, you need 2950 lineal feet of it, etc. . .

hope this helps!

In Europe we all get charged by square meters when having carpet installed. It depends on the store. Not many years ago everyone in the US priced their carpet, pad, and installation by the square yard. Then someone realized they could advertise much lower prices if they changed everything to square feet. Now most flooring is sold by the square foot, but it seems most still install by the square yard (plus a surcharge for steps and odd shapes).

12 x 15 = 180 sq ft

180/1.7 = 105.88 tiles that's assuming the tile is 1.7 sq ft if its 1.7 x 1.7 then

180/2.89 = 62.28 tiles

figure out how many tiles per box then add in 10% waste factor and get the closest box rounding up too many tiles is ok save them in case you break some

I have tiled over cork tiles with ceramic tiles and it worked fine in a bathroom, around a bath. If the current tiles are really well fixed it should be fine.

It varies greatly from product to product and from market

to market. The best way to get an answer is to put an ad on Craigslist

telling what you want installed, ie..

12' porcelain tile overwood subfloor,

new construction, 400 sq feet.

The lesson here is that the more detail you put in the ad, the better the quote.. You will have to understand that not every installer has Golden Hands, some are thieves & butchers, so you may not always want the low bidder..

R$10 for m2 (US$4)