Home Theater

Sorry I don't have any idea about science & tech but I heard that, the lcd we use is assembled with IPS panel technology.

HDMI and optical are both physical carriers for data. Whatever signal is put onto the cable or fiber will come out the other end and will be identical quality. The quality of the signal is entirely dependent on the signal source and not the interface cable. The better interface is the one that fits better into the system in question. For an audio only set up, optical fiber will probably be the right choice. For video based systems with soundtracks for video content, HDMI will be the more convenient solution. The important point to note is that neither method will degrade the audio quality nor will either of them enhance quality. The cable or fiber is effectively completely transparent and has no effect on the resulting sound. Please note: HD audio formats like Dolby True HD and DTS Master Audio cannot be transferred by optical cable.

Give it to me I'll take a free Plasma TV. you can come and fetch it, its a 42" size and the sound works but no picture

Program is based upon a test signal that simulates a "real-world" program signal in a loud speaker

Dolby Digital is a surround format that is quite common for DVDs, HD broadcasts and some television shows. It has 5 discrete channels of audio (3 front, 2 back, 1 sub) that create a durround environment with each speaker independantly producing a separate sound.

This format has been extended and other versions are constantly being released.

The single long page manual from Psyclone can be found at the link below.

Yes but if it's overly hot you probably need to give it room so that air can circulate around it. If it's in a cabinet with no venting, it will get too hot and can burn out. A/V cabinets have open backs or at least holes in the back to allow for air circulation

Yes personal ones to!

__

Of course Canada does. We use moose antlers for antennae.

Yes. But you have to have a video card ,in your computer, with a video in option.

Yes. You could buy a video card with a video input for about $50 - $100. You could then use Nero software or some other Media Center type of software to view the videos. Now if you have an Xbox 360 and bought the VGA adapter for $39.99, and can view everything in HD directly through your monitor.

Who as a person or who as a manufacturer? This is complete subjective, but I would say that the best home theaters are in the homes of directors and audio engineers. People like George Lucas, Tomlinson Holman etc. Each is quite different and designed to the tastes of the owner. The best home theaters in the world are assembled from the best speakers in the world. For most Audiophiles this means brands such as Wilson Audio, B&W etc.

The most expensive speakers available to the general public are Wisdom Audio speakers at $500k each.

A stereophonic sound system records on two or more channels. Separate microphones are used in recording and separate speakers in reproduction. This approximates the audio effect of the original performance.

M8 (Metric 8mm) screws, 15mm long are used to secure a Toshiba 55" LCD TV to a wall bracket.

Bose and Pioneer make some economical yet quality home theater systems. True audiophiles, however, are going to look at brands like Yamaha, Harmon Kardon, and Denon. Good audio equipment is expensive.

Connect the satellite receiver to the surround receiver. You can then use the receiver to switch between this source and the the DVD or Blu-Ray player.

what size screw to mount 32 sony bravia

Should be between 200 -250 RMS

Are you asking for the recommended POWER in watts RMS, or do you want to know how many speakers you will need?

For a 5.1 speaker system, a system with 100-120 watts per channel RMS would suffice. This would be a total of 500 watts of power, plus the power amp that is built into the subwoofer.

This would use 5 speakers, and one subwoofer.

Digital Audio Workstation or DAW is nothing but a computer installed with software's and hardware's which enables it to record and edit audio. All Studios have DAW's these days cause everything is recorded in digital with really powerful computers. So to sum up you need a really acoustically treated studio to record sound so you need a studio which has a DAW.

KV-LX34M31 is a model # for a sony crt television.

I am also looking for the same answer. I am planning to buy Bose Acoustimass 10 Series IV and Pioneer AV receiver model VSX 10120-K. I am checking if these speakers are compatible with Pioneer receiver.

Some disadvantages of wireless surround sound are mainly around the power and performance. They need batteries and the power might not last that long causing a lag in picture to sound.

I want to tell you what just worked for me... 1. Turn the component on that you want to program 2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remote 3.Press ON/OFF button until your unit turns off. 4. Press Stop button to program the "code" that you remote found to work your component.

The vertical deflection system is broken. The vertical deflection system is broken.

TV surround sound systems can be purchased from many electronic stores. Retail department stores carry many brands as well. The best place is the internet that way you can research the prices.