How long would a person need to be exposed to methane gas before they become unconscious?
The time it takes for a person to become unconscious from methane gas exposure varies depending on the concentration of the gas in the air, the person's level of activity, and their overall health. In high concentrations, exposure to methane gas can cause rapid onset of symptoms like dizziness, nausea, and unconsciousness in a matter of minutes. It is important to immediately evacuate the area and seek medical attention if methane gas exposure is suspected.
What are four similarities between ammonia and methane?
Are tankless water heaters electric or do you need to get propane?
Tankless water heaters can be powered by electricity or propane. Electric tankless water heaters are more common, but propane tankless water heaters are popular in regions where natural gas is not available. Both types offer energy efficiency and the convenience of on-demand hot water.
What is the name of this process c8h18- alkane an alkene?
C8H18 is an alkane because it is a saturated hydrocarbon. You can work it out by using the equation CnH2n+2 and if that works then its an alkane.
The name of the reaction is "splitting" the octane, or "catalytic splitting" (bacause a catalyst is usually required to make the reaction happen).
e.g. C8H18--> C5H12+ C3H6
The sun burns helium to make what?
The sun does not burn in the conventional sense, it is a fusion bomb confined by its own gravity. At the core of the sun, hydrogen plasma fuses to form the element helium, a and this fusion releases the energy which makes the sun hot.
hydrogen, helium
What molecule has the highest boiling point methane chloromethane or methanol?
Methanol has the highest boiling point among methane, chloromethane, and methanol. This is because methanol has stronger intermolecular forces (hydrogen bonding) compared to methane (only dispersion forces) and chloromethane (dipole-dipole forces).
Coal is considered a hydrocarbon because it is primarily composed of carbon and hydrogen atoms. When coal is burned, it undergoes combustion with oxygen, releasing energy in the form of heat and producing carbon dioxide and water vapor as byproducts. This combustion process is characteristic of hydrocarbons.
Can you use butane gas in your diesel car?
No, you should never use butane gas in a diesel car as it can cause serious damage to the engine. Diesel engines require diesel fuel for proper combustion and performance. Using a different type of fuel, like butane gas, can lead to engine misfires, damage to the fuel system, and potentially dangerous situations.
Does methane hydrate form within the ocean and are not expensive to obtain?
Yes, methane hydrates form in seafloor sediments in cold, high-pressure environments. While they contain significant amounts of methane, extracting and converting them into energy sources remains technically challenging and costly compared to conventional fossil fuels. Further research is needed to assess the environmental impacts and feasibility of large-scale methane hydrate extraction.
What is the molecular sign for propane?
THe chemical formula (not molecular sign) for propane is C3H8.
Is mercury state physical at 1000 degrees Celsius?
Yes, at 1000 degrees Celsius, mercury will be in a gaseous state. Mercury has a boiling point of 356.9 degrees Celsius, so it will have transitioned to a gas at 1000 degrees Celsius.
Why do dropletes of water form on a can of cold soda if left outside on a hot day need answer ASP?
ASAP
The water vapor in the air tend to collect on the cold sofa and form liquid water. On a hot day water in the air is in individual water molecules because heat causes the molecules of water to move more energetically and break the hydrogen bonds that hold water molecules together. Cold, the absence of heat, tends to slow the energetic molecules down enough that on the cold surface of the soda they tend to regain their hydrogen bonds and form water. Same principle as rain. In the close atmosphere of the earth it never gets cold enough, except in the arctic climes, to form water. Higher up, a different story.
What would be used to recognize an unsaturated hydrocarbon is tis structional formula?
For recognizing an unsaturated hydrocarbon in its structural formula, look for multiple bonds such as double or triple bonds between carbon atoms. These bonds indicate unsaturation in the molecule, distinguishing it from saturated hydrocarbons that only have single bonds between carbon atoms.
How is acetylene gas prepared in the laboratory?
The usual laboratory method for making acetylene is by adding (dropwise) water to calcium carbide:
CaC2 + 2 H2O → C2H2 + Ca(OH)2
Calcium carbide is very cheap and available without restrictions in most countries.
What does a hydrocarbon chain look like?
A hydrocarbon chain is composed of carbon and hydrogen atoms linked together in a linear structure. It can vary in length and complexity, with simple chains being straight while more complex chains may be branched or cyclic. The general formula for a hydrocarbon chain is CnH2n+2, where n represents the number of carbon atoms in the chain.
What is the balanced reaction of propane c3h8?
If you mean the balanced reaction of the combustion of propane, it is:
C3H8 + 5 O2 ---> 3 CO2 + 4 H2O
Yes. CH4 is the formula for methane. The simplest of all hydrocarbons.
What is the final volume if 10L of methane reacts with 20L of Oxygen at 100c and two atmospheres?
The reaction between methane and oxygen to form carbon dioxide and water is balanced as follows: CH4 + 2O2 -> CO2 + 2H2O.
Using the ideal gas law, we can calculate the final volume by determining the number of moles of methane and oxygen reacting and then finding the volume of the products formed at the same conditions of temperature and pressure.
What is the term given to breaking of long hydrocarbon chains?
The term given to breaking of long hydrocarbon chains is "cracking." Cracking is a process that breaks down complex hydrocarbons into simpler molecules like light hydrocarbons such as ethylene, propylene, and butylene.
Complete combustion of methane in a gas fire produces carbon dioxide and water vapor, which are harmless. However, incomplete combustion can lead to the release of carbon monoxide, a poisonous gas that can be harmful or fatal if inhaled.
Incomplete combustion can also result in the production of soot and particulate matter, which can accumulate in the chimney or on surfaces, potentially causing respiratory issues and contributing to air pollution.
The presence of unburned methane in incomplete combustion can increase the risk of fire or explosion due to the buildup of flammable gas in enclosed spaces.
Incomplete combustion can lead to the formation of nitrogen oxides, which are pollutants that contribute to smog and acid rain, impacting both human health and the environment.
The inefficiency of incomplete combustion can result in wasted energy, leading to higher fuel consumption and increased greenhouse gas emissions, contributing to climate change.
Which is an organic hydrocarbon that can release a large amount of energy?
A common organic hydrocarbon that can release a large amount of energy when burned is octane, which is found in gasoline. When octane undergoes combustion, it releases heat energy that powers engines and vehicles.
Is burning magnesium different from burning methane?
When burning magnesium the light shines much brighter... so much to the point where it can blind your eyes if you look directly at it while burning... on the other hand methane can be observed while being lit and it wont mess up your sight in other words it is NOT nearly as bright!
Which planet contains a large amount of solid methane?
The planet Saturn's moon Titan contains a large amount of solid methane in its surface and atmosphere. This methane plays a key role in Titan's unique weather patterns and geology.
Why don't methane and oxygen react immediately?
For any chemical reaction, there is what is called an activation energy that is required to make that reaction happen. Methane and oxygen both exist as molecules in which there are molecular bonds. In methane, the carbon is bonded to the hydrogen, and in diatomic oxygen, the two oxygen atoms are bonded to each other. So, before the oxygen can bond to the carbon and the hydrogen, all of those existing bonds have to be broken. Once the process begins it is self-sustaining, because it releases a lot of energy, more than enough to break the existing bonds in methane and oxygen. But you still need the activation energy to get things started. This would normally come in the form of a spark. It just takes one small spark to set off an explosion, if you have a mixture of methane and oxygen. Or a pilot light, to light your gas stove.