answersLogoWhite

0

🌼

Lawn Mowers and Garden Tools

If you are confused by the wide variety of tools available to maintain your yard, ask for help here regarding a new purchase or how to fix or improve something you already have.

10,636 Questions

What is the procedure to adjust the valve clearance on a Briggs and stratton 24 hp v twin engine?

To adjust the valve clearance on a Briggs and Stratton 24 hp V-twin engine, first, ensure the engine is cool and disconnect the spark plug wires for safety. Remove the valve cover and rotate the engine to top dead center (TDC) on the compression stroke for the cylinder being adjusted. Measure the clearance using a feeler gauge, and if necessary, adjust the clearance by loosening the lock nut and turning the adjustment screw to achieve the specified gap. Finally, recheck the clearance, reassemble the valve cover, and reconnect the spark plug wires.

What is the fuel ratio for a PB-210 leaf blower?

The PB-210 leaf blower typically operates on a fuel mixture of 50:1, which means combining 2.6 ounces of 2-stroke engine oil with one gallon of unleaded gasoline. Always consult the owner's manual for the most accurate specifications and recommendations for your specific model. Using the correct fuel ratio is essential for optimal performance and longevity of the engine.

How many hours does .3 gallons of gas last in a push lawn mower?

The duration that 0.3 gallons of gas lasts in a push lawn mower depends on the mower's fuel consumption rate, which typically ranges from 0.5 to 1.0 gallons per hour. Assuming an average consumption of 0.75 gallons per hour, 0.3 gallons would last about 24 minutes. However, this can vary based on the mower's engine size, grass height, and cutting conditions.

Why will my Briggs and Stratton lawnmower motor start fine and then quit?

Your Briggs and Stratton lawnmower may start fine and then quit due to fuel issues, such as clogged fuel lines, a dirty fuel filter, or old fuel that has lost its potency. It could also be related to air flow problems, like a clogged air filter, or ignition issues, such as a faulty spark plug. Additionally, overheating due to low oil levels or a malfunctioning cooling system can cause the engine to shut down. Regular maintenance can help prevent these problems.

How do you clean float needle on 16.5 HP Briggs and Stratton Engine?

To clean the float needle on a 16.5 HP Briggs and Stratton engine, first, remove the carburetor from the engine. Disassemble the carburetor to access the float and needle assembly, then carefully remove the float and needle. Clean the needle and seat with carburetor cleaner and a soft brush to remove any debris or varnish. Reassemble the components and reinstall the carburetor, ensuring all connections are secure.

How much horsepower does a 900 cc motor produce?

The horsepower produced by a 900 cc motor can vary widely depending on the engine design, type, and tuning. Generally, a 900 cc engine can produce anywhere from 70 to 120 horsepower, with performance-oriented models potentially exceeding this range. Factors such as forced induction, fuel type, and engine efficiency also play a significant role in determining the exact output.

How do you check hydraulic fluid in cub cadet zero turn mower?

To check the hydraulic fluid in a Cub Cadet zero-turn mower, locate the hydraulic fluid reservoir, usually marked with a dipstick or fill cap. Remove the dipstick, wipe it clean, and reinsert it without screwing it in to check the fluid level. The fluid should be within the recommended range indicated on the dipstick. If the level is low, add the appropriate hydraulic fluid as specified in the owner's manual.

What is the name of a tool that measures wire on the spool?

A tool that measures wire on a spool is commonly known as a "wire gauge" or "wire length measuring device." These tools help determine the amount of wire remaining on a spool by measuring its diameter, length, or both. Some advanced versions may also feature digital readouts for precise measurements.

Where do you find a replacement spool for a Remington weed eater?

You can find a replacement spool for a Remington weed eater at local hardware stores, garden supply shops, or home improvement centers like Home Depot or Lowe's. Additionally, you can check online retailers such as Amazon or the official Remington website for specific models and compatible parts. Make sure to verify the model number of your weed eater to ensure you get the correct spool.

What happens if you put unleaded fuel into two stroke motor mower?

Using unleaded fuel in a two-stroke motor mower can lead to engine damage because two-stroke engines require a fuel-oil mix for proper lubrication. Unleaded fuel typically lacks the necessary oil, which can result in increased friction and overheating. This may cause the engine to seize, leading to costly repairs. Always follow the manufacturer's fuel recommendations to ensure optimal performance and longevity of the equipment.

What type of oil does a troy bilt 190cc use?

A Troy-Bilt 190cc engine typically uses SAE 30 motor oil or 10W-30 oil for warmer temperatures. For colder conditions, 5W-30 can also be used. It's essential to check the owner’s manual for any specific recommendations regarding oil type and viscosity for optimal performance.

Where can you get a manual for a Spirit 8hp snowblower?

You can obtain a manual for a Spirit 8hp snowblower by visiting the manufacturer's website or contacting their customer service for assistance. Additionally, online resources such as forums, user groups, or websites that specialize in outdoor equipment manuals may have downloadable versions available. Check also sites like eBay or Amazon, where sellers may offer physical or digital copies. Lastly, local repair shops or dealers might have copies or can help you find one.

How do you replace a belt on a Kubota lawn mower?

To replace a belt on a Kubota lawn mower, first, ensure the mower is turned off and the key is removed. Remove any necessary covers or guards to access the belt, then release the tension by adjusting the idler pulley or removing the tension spring. Slide the old belt off the pulleys and install the new belt, ensuring it follows the correct routing. Finally, reassemble any parts removed and test the mower to ensure the belt is functioning properly.

What size deck belt do you need for a duetz allis 613 with 36 inch deck?

For a Deutz-Allis 613 with a 36-inch deck, the required deck belt size is typically around 1/2 inch wide and approximately 92 inches long. However, it's always best to consult the owner's manual or a parts dealer for the exact specifications, as variations may exist based on the model year or any modifications. Double-checking with a dealer can ensure you get the correct belt for optimal performance.

What if your cub cadet lawn tractor won't restart?

If your Cub Cadet lawn tractor won't restart, first check the fuel level and ensure there's fresh gasoline. Next, inspect the battery for a proper charge and clean any corrosion from terminals. Additionally, examine the ignition system, including the spark plug, for any issues. If these steps don't resolve the problem, consult the owner's manual or a professional for further troubleshooting.

Who is the parent company of husqvarna?

The parent company of Husqvarna is the Husqvarna Group, which is a global manufacturer of outdoor power products, garden equipment, and power tools. The Husqvarna Group is headquartered in Sweden and operates several well-known brands in addition to Husqvarna, including Gardena and McCulloch. It focuses on innovation and sustainability in the outdoor products industry.

How do you adjust a John Deere 180 carburetor?

To adjust a John Deere 180 carburetor, start by warming up the engine to operating temperature. Locate the idle speed and mixture screws; typically, the idle speed screw is on the side, and the mixture screw is often found near the bottom. Adjust the idle speed screw to achieve a smooth idle, then fine-tune the mixture screw for optimal performance, usually turning it clockwise until the engine begins to stumble, then backing it out slightly until it runs smoothly. Always refer to the specific service manual for your model for precise settings.

What is the cross reference filter 115-8868?

The cross reference filter 115-8868 is typically used in various automotive and industrial applications to ensure proper filtration of fluids, such as oil or fuel. It may serve as a replacement for specific OEM filters from manufacturers like Caterpillar or others. To ensure compatibility and performance, it's essential to verify its specifications against your equipment's requirements. Always consult the manufacturer's guidelines or a reliable parts catalog for accurate cross-references.

Where can you find a carburetor diagram for sears tractor 502.255713?

You can find a carburetor diagram for the Sears tractor model 502.255713 in the owner's manual or service manual specific to that model. Additionally, websites like Sears' official parts site, online forums dedicated to vintage tractors, or parts retailers often provide diagrams and detailed schematics. You might also check platforms like eBay or specialized tractor parts websites for downloadable manuals.

What oil is used in the cub cadet trans axles?

Cub Cadet transaxles typically use a specific type of oil known as hydraulic fluid or gear oil, depending on the model. For many models, it's recommended to use SAE 20W-50 motor oil or a high-quality gear oil like 80W-90. Always consult the owner's manual for the exact specifications and recommendations for your specific model to ensure optimal performance and longevity.

How do you build tow mower?

To build a tow mower, you'll need a sturdy frame to support the mower deck and a hitch for attaching it to a towing vehicle, such as a tractor or ATV. Start by assembling the frame using durable materials like steel or aluminum, ensuring it can withstand the weight and vibrations. Next, securely mount the mower deck onto the frame and connect the necessary drive mechanisms (like a belt or chain) to power the blades. Finally, attach the hitch and test the setup for stability and proper functionality before use.

What direction to turn blade bolt for loosening?

To loosen a blade bolt, you typically turn it counterclockwise (lefty-loosey). This is the standard direction for loosening threaded fasteners. Always ensure to apply consistent pressure and, if necessary, use a suitable tool for leverage to avoid stripping the bolt.

How much 4 cycle oil to gas for echo weed trimmer?

For an Echo weed trimmer, the recommended fuel mixture is typically 50:1, which means you should mix 2.6 ounces of 2-cycle oil with 1 gallon of unleaded gasoline. Always check your specific model's user manual to confirm the correct oil-to-gas ratio, as it may vary slightly. It's essential to use a high-quality, low-ash 2-cycle oil to ensure optimal performance and longevity of your trimmer.

How do you adjust valves on a 20 hp Briggs stratton?

To adjust the valves on a 20 hp Briggs & Stratton engine, first, ensure the engine is cool and disconnect the spark plug. Remove the valve cover, then rotate the engine to bring the piston to the top of the compression stroke, aligning the timing mark. Use a feeler gauge to measure the clearance between the rocker arm and the valve stem; it should be set according to the specifications in your engine's manual (usually around 0.004 to 0.006 inches for intake and exhaust). Adjust the clearance by turning the adjustment screw and then recheck the clearance before reassembling the valve cover.

What is the oil to gas ratio for a McCulloch Pro Mac 55?

The McCulloch Pro Mac 55 chainsaw typically uses a fuel mixture of 40:1, which means 40 parts gasoline to 1 part two-stroke oil. It's important to use high-quality two-stroke oil to ensure optimal performance and engine longevity. Always refer to the owner's manual for specific recommendations, as variations may exist based on the model or modifications.