0
Metric System
The metric system is an international basis of measurement based on a decimal system. It uses standard base units to name larger and smaller units.
2,771 Questions
1 liter equals how many cubic square feet?
There is no such thing as 'cubic square feet'. There is either 'square feet', which is a unit of area; or 'cubic feet', which is a unit of volume. A Litre is also a unit of volume, so you can convert Litres into cubic feet.
The important fact to remember is that one inch = 2.54 centimetres by legal definition.
1 Litre is equivalent to a cube 10 cm x 10 cm x 10 cm.
Therefore 1 Litre = 10 x 10 x 10 cm³
= (10/2.54) x (10/2.54) x (10/2.54) cubic inches
= (10/2.54/12) x (10/2.54/12) x (10/2.54/12) cubic feet
= 0.0353146667214886 cubic feet approximately (according to my calculator)
Look for conversion factor of English Imperial system to metric system and vice versa?
The problem with the English Imperial system is that there's a different
conversion factor for every unit ... potentially 100 different numbers to
answer your question. If you'll choose one, two, or three specific English
Imperial units, we'll give you their conversion factors to/from metric units,
although those numbers are easily found on line.
How do you add and subtract with the metric system?
To add and subtract with the metric system, make sure the units of measurement are the same (e.g. grams with grams, meters with meters). Then, simply add or subtract the numerical values. If needed, convert between different metric units before performing the operation.
Is pounds used in the metric system?
No, pounds are not used in the metric system. The metric system uses the unit of measurement called kilograms for weight instead of pounds.
In a quarter of a mile how many meters are there?
In a quarter of a mile, there are approximately 402 meters. This is because one mile is equal to 1,609 meters, so a quarter of a mile is 1,609 meters divided by 4, which equals approximately 402 meters.
The pascal is the SI unit for?
The pascal is the SI unit for pressure, defined as one newton per square meter. It is commonly used to measure pressures in various systems such as in physics, engineering, and meteorology.
What system is the metric system based on?
The current metric system is officially known as SI units, from the French for international system.
It is based on the metre, kilogram, second metric system which used the metre, kilogram and second as its fundamental units.
Before the metre,kilogram,second, there was an older version based on centimetre, gram, second.
Why does the US use the metric system less than other countries?
This is actually two separate questions:
1) Why is the metric system used almost everywhere in the world?
Because it makes more sense than other systems. It's really just as arbitrary as any other measuring system, but it has one big thing going for it, and that's that converting between different units of measure is usually trivial since it's based on powers of ten (with the exception that time units are the same horrible conversion nightmare as always, being the same old 60/60/24/quasi-random number near 30/12 ratio).
2) Why is it not used in the US?
There are two main reasons.
One is that a lot of existing machinery was based on the "English" system, and retooling would have cost a lot... the US being one of the few industrial economies in the world that DIDN'T have to rebuild much of its manufacturing capability after World War II anyway.
The second reason is that the US government, being of the people, is frequently stupid and attempted to "ease into" the metric system instead of just saying "Listen up, you jerks, this is the new measuring system, USE IT NOW." Which resulted in having to learn lots of fiddly conversion rules instead of just dealing with the new system and getting used to it, and as a result people think the metric system is "complicated," when in fact it was just the procedure to convert to units they (thought they) understood that was complicated.
Concrete example: one of the few things that did switch was soda. (Because the plastic soda bottle was developed. Companies needed new bottle manufacturing equipment anyway. Might as well conform to the rest of the world; for one thing, it means a bigger market for your plastic bottles.) You probably don't know off the top of your head how many ounces two liters are, and you (and this is the important bit) most likely don't care. You know how much soda two liters of soda is, because you've been buying it that way long enough to get used to it.
Does England use the metric system?
Yes, England primarily uses the metric system for weights and measures. However, in some cases, imperial units are still used alongside metric units.
The difference between the Metric System and SI?
There is no difference they are the same thing
AnswerSI is the current version of the metric system.
For example, the centimetre, the calorie, and the litre are examples of metric units, but they are not SI units.
It stands for "système internationale," whoch is Frenc h for "international system." This refers to the measurement units commonly referred to as the metric system.
SI unit stands for "system International" which is about to define units of different things like second is the unit of time. kilogram is the unit of weight.
20 mm = 0.7874 inch (rounded)
Direct Conversion Formula
20
mm
*
1 in
25.4 mm
=
0.7874015748
in
Why don't they use the metric system?
The United States does not use the metric system primarily due to tradition and resistance to change. The cost of transitioning to metric and lack of immediate benefits have also contributed to the continued use of the imperial system.
To convert brake horsepower (bhp) to metric units, you can use the following conversion factor: 1 bhp is equal to approximately 0.7457 kilowatts (kW). Multiply the bhp value by 0.7457 to get the equivalent power in kilowatts.
In the metric system a micrometer is equal to 0.000001of a?
In the metric system, a micrometer is equal to 0.000001 of a meter, which is one millionth of a meter. It is often used to measure very small distances with high precision.
What is the basic unit of density in the metric system?
Density is usually measured in g/cm3.
The international standard unit for density is kg/m3
In the metric system the units for force are?
Force per unit Area = F/A Units are Newton's per square meter This unit is called a Pascal, abbreviated Pa Atmospheric pressure = 1.01*10^5Pa
How do you calculate Pascal As in the SI unit for pressure?
Pascal (Pa) is the SI unit for pressure and is equal to one Newton per square meter (N/m^2). To calculate pressure in Pascal, divide the force (in Newtons) by the area (in square meters) over which the force is applied. Mathematically, pressure (Pa) = force (N) / area (m^2).
What year did US liquor industry switch to metric system?
The U.S. liquor industry officially adopted the metric system in 1989. This change was mandated by the Federal government to standardize measurements, making it easier for consumers and producers to understand and compare alcoholic beverages.
What are the pros and cons of the metric system?
Pros
-Metric systems are used by many countries around the world
- They have a bases of 1's and 0's (0˚C=Freezing, 100˚C=Boiling)
Cons
-Imperialism has been used by the US for a long time
-People would have to "re-educate" themselves
-Imperialism has measurements related to your body (inches, yards, fingernails,etc...)
Hope that helped!
