What is the cooling agent inside pipes of a refrigerator?
The cooling agent inside pipes of a refrigerator is typically a refrigerant, such as Freon (R-134a) or HFC-134a. These refrigerants are substances that can absorb heat from the interior of the refrigerator and release it outside, allowing the refrigerator to maintain a cold temperature.
What size model number 253.6172201A?
if you are referring to the Kenmore Refrigerator that has this model number, then the approximate dimensions of this model is 65" height x 28.5" width x 29" depth. i have this model fridge and provide the dimensions that were taken from measuring the actual fridge.
Why don't we use the rejected heat by a condenser in refrigerator?
Although I doubt there is a definitive answer to this question, since many factors, mostly economical, take into account, but to make a product that harnesses the rejected heat would be quite difficult. Different refrigerators produce varying amounts of heat, dimensions can vary greatly, and space constraints limit the market greatly. In addition, current methods of converting free heat into energy are very inefficient.
At the most, you might be able to use it as a hand warmer.
Why can't you tip a fridge on its side?
It's not that u can't. It's just that it is not tge best idea. It has to do with the refridgerent that is in the cooling sytem and compressor and such. A general rule is that if it has to be laid down then when you stand it back up let it sit for twice the amount of time that it was left in the lying down position. There is a low and a high side in the cooling system. Basically it's liquid and then the gas part. It messes this up and get all mixed up.
What is the characteristics of a refrigerator?
-keeps food cool-has fluid that flows through pipes and cools down so that the fridge is not hot
-the warmer area is on the bottom of the fridge
How can you write a dialogue between shopkeeper and customes who wants to buy a refrigerator?
Writing dialogue is not as hard as you're letting it seem. You have dialogue all the time -- it's called talking. If you honestly cannot think of what your characters are going to say to one another, you need to go take a break and go somewhere out in public. Sit somewhere in the middle of a crowd for one to two hours and just listen to people talking. Then, go home and write down some of the things you heard people saying. That's dialogue.
Surely you have bought something at one time - just pretend that you're buying a refrigerator and think of something you'd like to know before you bought it! Don't you think you'd like to see how much food it holds, or how much it will cost?
When you need to have your characters talk, just pretend it's you and a friend (or several friends), and have them say something you'd probably say in the same situation. Then imagine what your friends would say in reply, and go back and forth that way. As you become a better writer, your characters themselves will "tell" you what they want to say, because they become like real people to you.
What causes frost in no frost refrigerators and reduces its efficacy?
Frost-free refrigerators (freezers, really) are frost free because they periodically raise their temperature above 32 degrees for a short amount of time and allow the frost to melt. The idea is that the food does not get warm enough to affect it due to it being for such a short time. What causes frost would be to turn this option off, or for it to be defective. It may be less energy efficient since the freezer is raising and lowering its temperature often.
When checking the refrigeration unit what does the absence of bubbles in the sight glass indicate?
Call in an expert to fix it.
Bubbles visible in the glass with the system operating.
Bubbles visible in the glass with the system operating.
What is the purpose of service valves on the 10K BTU refrigeration unit?
Isolating compressor for replacement.
Where is the CDI BOX on a 1988 fourtrax?
On a 1988 Honda FourTrax, the CDI (Capacitor Discharge Ignition) box is typically located under the seat or near the rear fender area. To access it, you'll usually need to remove the seat and possibly some side panels. The CDI is a rectangular black or gray box with wiring harnesses connected to it. Always refer to the owner's manual for specific details related to your model.
How do you tell a frigidaire refrigerator year?
It's in the ser.# - but I have to see it to tell which year. Any appliance parts store can tell you if they see full ser.#.
How cold do refrigerators get?
a fridge should ideally be between 3 and 5 degrees. A freezer normally sits at around -18 degrees.
How long does it take to an ice box to get cold if its been in storage for a year?
I am going to guess you mean a freezer or Refrigerator as an Ice box will be as cold as the ice you put in it.
Two hours should have a house fridge or freezer down to temperature.
An RV fridge could take 8 hours according to the manufacturer.
What should you do if your refrigerator is not holding food cold enough?
First check that the refrigerator's thermostat is set to the correct temperature. If it is then your refrigerator is faulty and needs repairing or replacing.
Please do not eat any food that has not been held cool enough.
Do you put jelly in refrigerator to make it set?
No-- it needs the lower temperature to coagulate. Maybe if you set the bowl in an ice chest with ice.
Why do glasses break in the fridge and freezer?
Because the glass gets cold and to form the figure it was in it had to expand with heat therefore putting a glass in an extremely cold enviornment like the freezer the glass particles get compact (really tight) and shatters.
When should refrigerator freon be checked?
When the fridge is not cooling due to freon leak or freon restriction.
Inside