0
Sewing
Sewing is simply the stitching and joining of pliable materials, such as cloth, various fabrics, leather, etc. using needle and thread. Sewing can be done by hand or by machines. Questions in this topic also include types of stitches, patterns, and how to do them.
4,397 Questions
How does a check spring on sewing machine work?
The purpose of the check spring is to maintain tension on the thread as the thread take up arm returns to the top of the stroke pulling the thread back out of the cloth.
The take-up arm follows the needle. As the needle leaves the cloth, the friction between the thread and the cloth forms a loop that the hook inside the machine catches, pulls around the lower/bobbin thread forming the locked stitch. As the take up arm returns to the top of the stroke the thread between the tensioner and the take up arm becomes slack. The check spring pulls on this slack to keep the thread taut.
Proper stitches can not be formed if the check spring is not set with sufficient "snap-back" or tension on the spring. Setting the "snap-back" is by feel. Adjust it from loose to tighter to get good stitches. It is a three way balance between the upper thread tensioner, the check spring and the bobbin tension.
Are thread-like filaments that form networks called a mycelium?
Thread-like filaments that form networks are called mycelium. These are vegetative parts of fungus that consists of a mass of branching.
How much is a brothers charger 651 sewing machine worth?
How much valuse is a brother charger 651 sewing machine pink and brown
Woven but look it up on wiki.
Denim is a diagonal twill weave.
The amount that a thimble will hold -- about 1/2 teaspoon. It is not used for an exact measure. It's just a way to saying "very little".
How do you sew hair extenions with a needle and thread?
depending on how much hair you are going to be putting in should depend on how many braids you will be doing. If you intend on your entire head being covered in hair extentions you should braid your entire haid in a circlar shape. If not the just a few rows with about an inch in between each row should be good. You can then sew up the end of the braid with the the hair thread. Then just thread your needle and start sewing your hair to the braid as if you were sewing a shirt.
Answerdepending on how much hair you are going to be putting in should depend on how many braids you will be doing. If you intend on your entire head being covered in hair extentions you should braid your entire haid in a circlar shape. If not the just a few rows with about an inch in between each row should be good. You can then sew up the end of the braid with the the hair thread. Then just thread your needle and start sewing your hair to the braid as if you were sewing a shirt.Where can I find cams for merritt 1862 sewing machine?
I'm picking one up at an auction. It looks to be in perfect condition.
How much is a Singer 221 Sewing Machine 1934 with a Chicago World's Fair Badge worth?
That depends upon numerous factors #1 Condition #2 Production Run #3 Case and its condition #4 Attachments including Foot Controller. Given those criteria, prices have ranged in the past 10 years from $1700 for one in deplorable contion w/ case to $10,000. There are always those "found in the local goodwill store" stories but expect to pay$3,000 and up!
How many yards of fabric would you need if you have a 30x30 panel of fabricl?
You would need one yard. Fabric is cut in one-fourth yard cuts. Three-fourths of a yard would be 27" which is not enough. To get the 30" length, you would need one yard and would have 6" left over in length. Most fabrics are at least 36" wide, so you would have some fabric left over in width also.
How can I make a necklace to ashes like the ones in movies?
To make a cremation necklace to hold the ashes of your loved one, you first buy a necklace that is designed to hold the ashes, then ask the funeral home to put the ashes in it.
They will only use an ounce or two, so you will still need an urn for the rest.
There are several methods of embossing cloth. The most common is to use an embossing machine that acts similar to a steam press. The design is installed on the machine, and it presses the fabric under pressure and heat.
Another method is to use a sew and stuff technique.
Used to finish edges of cloth with a zigzag cut for decoration or to prevent raveling or fraying.
Can you sew a doll with a sewing machine?
Yes, Women"s magazines used to make patterns, as they called them, sew and stuff, Very Cute were the Motorcats- Like Dennis the Menace in RR overalls with a railroad style hat, you could sew on a patch, say Penn Central or NYC. -but an anthropomorphic cat! I like that , Motorcats- Merrrrow.
You can also find patterns that allow for a porcelain head and sewn body in craft stores that sell the heads and fabric or fabric stores that sell the patterns and fabric.
What size table cloth for a 72 inch round table?
If you are making a rectangular 9 ft. tablecloth, you will probably need a little more than 9 ft. of fabric to allow for turning under and finishing your two ends. I would suggest 3 yards (9 ft.) plus another 6 in. to allow for turning under 1" and finishing your two ends with 2" hems.
Is there any way to make a dress styled in the The Great Gatsby theme?
Yes. Designing your own 1925 style dress will be fun. Numerous color photos of dress styles from that period are available online. Pattern books are also available. See related links.
I have one if you are still looking. I can mail you a copy. Post again if you are still looking.
Rachel
What are the zig zag lines on the skull called?
If you are referring to what I think you are, those "zig zag lines" are called cross bones.
So you're garment doesn't fray, you need to sew a "hem". A hem allowance is a small bit of fabric left on the end so you can sew a hem.
How do you calculate yards of fabric needed for 22 x 23?
One yard of fabric is 36" long, and varies in width. If you have 45" wide fabric, you need 22" of fabric (less than one yard). The fabric store can help you with that.
