Volume

One cannot be converted into the other Kwh,s is a measure of energy while cubic meters per hour is a measure of the flow of mass.

Did you have in mind how much energy is required to pump one cubic meter of water sayto a height of 100m per second this can be calculated and the result would be inWatts.

A liter is very close to 1 kilogram of pure water at maximum density under pressure of 1 atmosphere. It is also very close to 1 cubic decimeter, or 1/1,000th of a cubic meter. For much more complete information: http://en.wikipedia.org/wiki/Liter

The density of petrol is 0.8g cm3 which is the same as 800g per litre

=4000/0.8 = 5000cm3

5000cm3 = 5 litres of petrol.

Answered by the longfield BTEC boys.

The answer is 2.73. There are 1892.1ml in 64 ounces. Devide this by the 700ml and you get 2.703 . You can find a great conversion table on worldwidemetric.com.

In the US, 1 barrel of oil = 42 US gallons (159 liters or 34.97 imperial gallons).

A birdbath typically holds 4 liters of water, not 4 milliliters.

The private spilled 6.38 hectoliters (6.5 - 0.380) of fuel, since 380 milliliters is equal to 0.38 liters.

The density of Jet A and JP-54 fuel are approximately 6.8 pounds per gallon.

"ng" in measurement typically stands for "nanograms," which is a unit of mass equal to one billionth of a gram. It is commonly used in scientific research, particularly in fields like biology and chemistry to measure very small quantities of substances.

the water will over fill

2 pints in a quart and 4 quarts to a gallon, so 8 pints to a gallon, and 16 half-pints to a gallon.

gtt stands for "drops" in medical terminology.

you need to determine the type of solution [fluid] that you are refering to in order to determine the number of drops.

So, for instance, a crystaloid solution [e.g. normal saline] has 20 drops per ml

Therefore 8mls would form 8 x 20 drops = 160 drops

A colloid solution should as [gelofusine or blood] has only 15 drops per ml

therefore 8mls would form 8 x 15 drops = 120 drops

Hope this helps.

To calculate the volume of the pipe, we first need to determine the cross-sectional area using the formula A = πr^2, where r is the radius (4 inches). Then, multiply the cross-sectional area by the length of the pipe to find the volume in cubic inches. Finally, convert the volume from cubic inches to cubic feet by dividing by 1728.

You can use the density of the object.

Density is the mass per unit volume of a substance. Density = mass / volume. Rearrange it to solve for mass. Mass = density x volume.

You can find the density of the substance from a table of densities.

Or depending on what you know about the substance:-

moles = volume (dm3) x concentration (moldm-3)

moles = mass/Mr

Mr = molecular weight

100cm3 = 0.1dm3

If you know the volume, concentration and the Mr then mass can be solved by calculating the moles of the substance and multiplying by Mr.

about 20.27 fluid ounces

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left. You will get 48,000 mL = 48 L.

To convert 12 milliliters per second to liters per minute, we first convert milliliters to liters by dividing by 1000 (since 1 liter = 1000 milliliters). Therefore, 12 milliliters per second is equivalent to 0.012 liters per second. To convert this to liters per minute, we multiply by 60 (since there are 60 seconds in a minute) to get 0.72 liters per minute.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). These are the denominations you need to list when converting metric units. Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left (same as dividing by 1000). You will get 100 mL = 0.1 L.

8 US fluid ounces is about 236.59 mL.

That would be a little over 8 tbsp

For any regular prism, multiply the area of the base by the length of a side.

For irregular objects, use water displacement. Measure a volume of liquid with a graduated cylinder (or other measuring tool). Then, simply drop the object you want to know the volume of into the water. Find the new measurement that the water reaches on the graduated cylinder. Subtract the new reading from the old reading, and that's the volume of the object.

The volume of the cylindrical barrel would decrease since the volume of a cylinder is directly proportional to its height. The volume would decrease by a factor of 9/16, since volume is calculated by multiplying the base area (πr^2) by the height.

By S.I unit of conversion ,we can say that oz and mm both belong to different categories and hence cant be converted into each other .

But, oz c an be converted to mL.

one pound of liquid propane equals 8.5 cubic feet of burnable gas will this help

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). These are the denominations you need to list when converting metric units. Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left (same as dividing by 1000). You will get 0.10 mL = .0001 L.