Volume

What is the number of drops in a teaspoon?

There are 60 metric drops in a 5ml teaspoon. You'll find many variants on this ranging from 50 - 120, but 60 is a good bet. Generally, drops are not a precise measurement.

There are several exact definitions of a "drop". Here are 3 of them: * the "metric" drop, 1/20 ml (50 μL), which equates to 60 to a 5ml teaspoon.

* the medical drop, 1/12 ml (83⅓ μL). * the Imperial drop, 1/36 of a fluid dram (1/288 of an Imperial fluid ounce or 1/1440 of a gill (approximately 99 μl).

Note: There are 360 drops in a U.S. fluid ounce.

The volume of cylinder with a radius of 1.25 decimeters and height of 3.5 decimeters is: 17.18 cubic decimeters.

A cubic meter is a volume 1,000 times greater than a liter.

1 Tablespoon = 15mL 1 cup = 250 mL so.... 15 mL X 140 = 2100mL 2100mL/250 = 8.4 250mL/ .4 = 100mL so.... 8 cups, plus 100mL more

There is no standard formula that applies to all measurements involving linear feet. The conversion depends upon what is being measured. For example, to convert 12 linear feet of files boxes into cubic feet, you would also need to know the width and height of the file boxes. Assuming that they are 1.25 feet wide and 1 foot tall, then 12 linear feet of them would be 15 cubic feet of file boxes (1 foot times 1.25 feet times 12 feet).

One Cubic Meter of natural gas is approximately 36000 btu.

1 pt = 2 c

4 c = 1 qt

1 pt = 0.5 qt

4 qt = 1 gal

2 might, or 20 might, -we have no clue about the size of the fishbowl.

a liter of fat weighs 2.023843566857176 pounds.
A single liter of human fat weighs approximately 900 grams or 1.9 pounds.

There are 7.48 gallons in one cubic foot. So, there are 0.13368 cubic feet per gallon

210 US fluid ounces = 6.21 liters.

This depends on the density of the substance.

one centimetre

1.32 US gal.U.S. gallons are different from imperial gallons. 1 Imperial gallon is equal to 4.54609188 litres and 1 US gallon is equal to 3.78541178 litres. Liters on the other hand are the same everywhere. One liter equals 0.26 U.S. gallon or 0.219 Imperial gallon.

22.5 square feet (15 x 1.5 = 22.5)

50 cubic feet! 10 x 10 x 1/2 (6 inches) = 50.

If the cuboid were 10 feet x 10 feet x 1 foot the volume would be 10 x 10 x 1 = 100. Now if you imagine slicing the cuboid exactly halfway through the shallow dimension you will get two equal cuboids that would sum to 100 cubic feet and, therefore each cuboid would be 50 cubic feet.

1 US gallon equals 3,785 cc, and 1 imperial gallon equals 4,546 cc.

Aside from being different size engines, they are totally different engines with no interchangeable parts.

There's not a direct conversion unless you know the density of the material. Fluid ounces measure volume and pounds measure weight.

Water has a density of roughly 1 weight ounce per fluid ounce, so for it you're reasonably safe saying that 16 fluid ounces of water weigh a pound. But if you have something like mercury that's about 13.5 times denser than water, 16 fluid ounces of mercury would weigh around 13½ lbs

1 pint is 16 fluid ounces.

3,785 ml in a US gallon

Because grams measure mass and milliliters measure volume, this will change based on what you are measuring. If you are measuring water, 1 gram equals 1 milliliter. 125 grams equals 125 milliliters.