Windows 7

Well, if you have the toolbar with the cursor mania here's what you do:

1. Click on the Cursor Mania button on the toolbar

2. Click "Default" from the side menu on the left

3. Click on the picture of the default cursor

And you're all done:)

Install Windows XP mode on Windows 7. Connect your printer. At the taskbar at the top of the XP mode window, click on the USB tab. Select the Kyocera Fs-720 printer. If it asks you if you want to share, click yes. Your printer is now detected by the virtual xp machine.

Download the XP Kyocera Fs-720 driver. Install it. Open the document you want to print in the XP mode and print. You cannot print from Windows 7. You have to do so via the xp mode.

To print in the future, you will have to always click on the USB tab and share the printer. (This disconnects it from Windows 7 and connects it to the virtual XP mode machine).

It depends on many different things including but not limited to your budget, hardware, software you are planning on running (some of it is not compatible with windows 7).

Overall windows 7 is more stable than windows xp but requires sufficiently higher resoureses.

Windows XP Pro enables users to roll back an installation of XP to an original installation of Win98 or ME as long as the boot partition is formatted with FAT or FAT32.

Open Control Panel, open Add or Remove Programs, select Uninstall Windows XP and click Change/Remove.

I would never advise using ME, use Win98se if you have to, its more or less ME but faster but then its not very stable. Use Win2k or XP is my advice.

You'll have to run Fdisk & Reformat, & partition... after you have saved any important files. You will need "all" the Windows ME drivers for each device, if you had WinXP or 2000 they might not work. Making sure to have a Floppy BOOT disk, this is important to get the CD-ROM working for the Operating system to be reinstalled, http://www.worldstart.com/tips/shared/rr1.htm Or go to Microsoft knowledge base. For their instructions.

Why would you want to. Windows ME is the worst OS Microsoft ever came out with! If anything you need to up grade to 2000 or XP.

as of recently, it is impossible to downgrade to windows me, your only options right now are xp (support ending soon), vista (don't do it), 7, and soon to be 8. Those are the only options for windows right now.

I'm not sure what you mean. But if you mean that you want to format a hard drive or partion which is not a system file disk/partion. Then it's really easy to do. Start My Computer, right click on the hard drive/partion which you want to format and choose format, then choose file system which you prefer to format, and press ok/start.

records management software, and imaging systems assist businesses with large volumes of records. Imaging systems convert all types of documents to digitized electronic data that can be stored and retrieved quickly.

X4 and X5 work... If you specify version of your software it will be easier to help you.

It depends on what type of computer you have. You should have something like a "Preferences" application though, where you can adjust the lighting and contrast.

It does support some of them, really simple ones. If you a game uses extensive graphics most likely you will have to look for a patch supporting Seven.

Right click on My Computer>Manage>servicies and apllication>servicies now you will get all the servicies in righat pane then choose RPC in general option you will find startup type in that you have to select disabe.

Aero

In Windows 7, standard users are restricted from disabling auditing due to permission settings tied to the operating system's user account control (UAC) and security policies. Only users with administrative privileges can modify audit settings through the Local Security Policy or Group Policy Editor. This ensures that critical security measures, like auditing, remain intact to monitor system activities and protect against unauthorized changes.

Yes. 64 bit system has a 32bit simulation mode to let users install 32 bit software. Program files x86 is where the 32 bit software being installed on a 64 bit system.

you reset the computer and the password should be gone, or type a random password if its wrong click I forgot it will take you into the settings for that account so you can change anything you want.

Example Password, Wallpaper etc

bios jumpers 1 and 2 are closed then start a normal boot

bios jumpers 2 and 3 are closed it resets power-on password and the supervisor password on reboot

to know how to set jumpers see motherboard instructions

also, you can remove the button battery for 15 seconds, then replace the battery, and start your computer on a normal boot

if you want to fromat a hard drive for windowsXP then read this...

/a<

you will need your winXP cd

This a fast trick to get you computer in DOS mode. Power off your computer then power it back on, while your computer is turning on keep pressing F8 repeatedly until you computer prompts you how you want to run. Some of your options will be run in safe mode, run in safe mode with networking, but you will select run in DOS mode. Once your in your DOS mode then you are ready to go!

all you need to do is just go on you-tube and write gangnam style

The most common extension would be the .pdf, which means portable document format.

Click on the Windows "Start" button in the bottom left had corner of your screen. Then, in the "Start search" box just under "All Programs", type "cmd". Hit enter. A 'dos' window will pop up. Type "ipconfig". Hit enter. Windows IP Configuration information will come up. This information will include your IP address. It may be listed as "IPv4" address. To exit the 'dos' window, type "exit" at the blinking cursor.

If you are behind a proxy or local gateway you will not find your IP with "cmd". Go to web site ip.nf (type in your browser or click a related link below) and you will see your IP. This method always works.

There are several ways of showing open windows in windows 7.

Try these...

WINLOGO + SPACE

WINLOGO + TAB

ALT + TAB

WINLOGO + CTRL + TAB

(The first one may not work for all models but worth a try).

On start up (before Windows loads) press F8 and choose the option "Repair your Computer"

***This will erase all your unsaved data!***

Or

1) Hold down the power button until it shuts down.

2) Press and hold the zero key and tap the power button once.

3) When you hear beeping release the zero key.

4) Click Yes to continue system recovery.

5) Click 'Recovery of Factory Default Software', click Next.

6) Click 'Recover to out-of-box state', click Next.

7) Click Next to Start recovery.

***This will erase all your unsaved data!***

How do I go to the gallery in Skpe to see my snapshots. I see nothing in the drop downs

If referring to WIndows 7 User Profile C:\Users let you move user files from one profile to another if your's have administrator rights. To manage settings navigate to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts

it comes with apple programs.. its like with itunes or something.. it doesnt rlly do anything other then connect to wireless devices