0
Windows XP
MS Windows XP operating system that was released for PC computers in 2001
9,737 Questions
What is the use of ctrl plus alt plus del?
The function of ctrl-alt-delete may vary between operating systems. In windows, it is typically used to access the task manager to monitor or shutdown various processes or to shutdown the computer itself.
Answer(Techsupport)
Yes,The Transmission Control Protocol (TCP) is one of the core protocols of the Internet Protocol Suite. TCP is so central that the entire suite is often referred to as "TCP/IP". Whereas IP handles lower-level transmissions from computer to computer as a message makes its way across the Internet, TCP operates at a higher level, concerned only with the two end systems, for example a Web browser and a Web server. In particular, TCP provides reliable, ordered delivery of a stream of bytes from one program on one computer to another program on another computer. Besides the Web, other common applications of TCP include e-mail and file transfer. Among its management tasks, TCP controls message size, the rate at which messages are exchanged, and network traffic congestion.
How do you connect a computer to a remote computer?
You have to use remote desktop connection and know either the computer ip address where to wnat to connect to or full name. Start->All Programs->Aceessories->Communication->Remote Desktop Connection.
P.S. You connect only to Windows Xp Pro or server versions (Windows 2003...). Windows Xp Home cannot be a remote computer where to want to connect to.
What is the difference between folder and briefcase?
Folder is just like a container for storing another folders and files of any kind while breifcase is a special folder used for synchronizing the data between the system and movable storage devices. It just updates them at same time..
What is the purpose of a DVD hard drive?
To hold the operating system files, operating system, save data, all the information in your computer will be saved on the hard drive.
The hard drive keeps all the data even when there is no power. It will stay forever until changed or removed by the computer.
Hard drives use a spinning magnetic disc and magnetically recorded and read from, using a swinging arm with a minute read/write head on it.
Called a hard drive to distinguish it from early magnetic discs, which were made of plastic film and called 'Floppy discs', because they were floppy (but held inside a rigid platic cover.)
Thats why you need to destroy your hard disk drive before disposal of your computer. Make sure the disposal is in a special place for electric stuff.
The data will survive, even when the hard drive is removed. It can be plugged into another computer and read.
Hewit and packard lap top that has ben locked by windows how can you unlock it?
When the welcome page comes up and asks you for a user name and password, type in
'administrator' in the user name box. This only works if the computer is new. The administrator has access to everything on the computer without having to have a password.
1. Login to a computer that can link to Internet. Download Windows Password Unlocker 4.0 and decompress it on that PC. Note that: there is a .ISO file. Burn the .ISO file to a CD.
2 Get out the newly created CD and insert it to the locked computer.
3 re-booted the locked computer and then followed the process of instructions. Just a few steps, the old password was removed.'''
4 Setting new password:
Step one: Open the "Control Panel"
Step two: Click the "User Account "
Step three: Select the account you wanna to set a new password.
Step four: Click "changing Account " and "set up password", then fill out the form as listed. Click "Create Password".
you can also do a system restore that would definitely do the thing for your computer
Where are registry hives stored?
The registry is spread along different files but if I'm not mistaken the majority of it is stored in so called SAM.
Who are the characters in The Open Window?
Frampton Nuttel suffers from a nervous condition and has come to spend some time alone. His sister sets up introductions for him with a few members of the community. His first visit is to the Sappleton house where he meets fifteen-year-old Vera, the niece of Mrs. Sappleton. Vera keeps Nuttel company while he waits. Upon hearing that Nuttel has not met the Sappletons, Vera tells Nuttel some information about the family. Vera says that three years ago to the date, Mrs. Sappleton's husband and two younger brothers went on a hunting trip and never returned. Vera goes into detail about the clothes they were wearing, the dog that accompanied them, and the song that Mrs. Sappleton's brother sang upon their return. Vera says that her grief-stricken aunt watches out the window expecting their return. When Mrs. Sappleton enters, she tells Nuttel that she expects her husband and brothers to return at any moment. Nuttel listens, thinking that Mrs. Sappleton has in fact gone crazy. Suddenly, Mrs. Sappleton brightens as she tells Nuttel that they have returned. Nuttel turns only to see the "dead" hunters. He becomes frightened and leaves in a rush. Mrs. Sappleton doesn't understand Nuttel's strange behavior, but Vera replies that he is deathly afraid of dogs. Not until the end of the story does the reader realize that Vera has tricked Mr. Nuttel. This is revealed with the last line of the story: "Romance at short notice was her [Vera's] specialty."
How do you disable system restore?
Click 'Start', 'Settings', 'Control Panel' Then select 'System' and click on the 'Performance' tab. Select 'File System' and the 'Troubleshooting' tab. Finally, check the box at the bottom to 'Disable System Restore'.
When you re-boot your machine the Restore facility will have been removed. You can reverse this by repeating this process and un-checking the box. When you next shut down it will create the Restore files but, obviously, only from that time - You will not be able to restore your system to an earlier time.
Right click on My computer on your desktop-then right click on properties-then click system restore tab-turn off-restart computer.
If you have a cursor from cursor mania how do you get it off?
Well, if you have the toolbar with the cursor mania here's what you do:
1. Click on the Cursor Mania button on the toolbar
2. Click "Default" from the side menu on the left
3. Click on the picture of the default cursor
And you're all done:)
Generally, powering up isn't as much of a problem, although certain peripheral equipment may not be identified during startup if they aren't already on when the computer tries to find them. Just put everything on a single shut-off switch and that problem should be solved. As for the shutdown process, certain operating systems leave files in strange "states" during operation and if the computer does not go through an orderly shut down the files will not be updated properly and will be corrupted next time your computer attempts to read them.
For removable media the above answer is true. If the hardware is a peripheral accessory device (scanner, printer, etc) the only risk is corrupting the operating system (typically & unfortunately Windows) drivers which could (but unlikely) have adverse and unpredictable results. The damage or dysfunction which could occur to the actual hardware are always described in the documentation which came with the device.
diskpart
What happens if you right click and screen and click refresh?
When browsing the internet it may sometimes be useful to do a page refresh. When clicked the browser reloads the webpage by reaccesing the web server and the page is the "freshly" redisplayed.
It allows you to see whether a certain point in the network can be reached, or not.
It allows you to see whether a certain point in the network can be reached, or not.
It allows you to see whether a certain point in the network can be reached, or not.
It allows you to see whether a certain point in the network can be reached, or not.
What is the Primary function of the file folder in records management?
keep related records together
identify all items located within the folder
Which is the best between Windows 7 ultimate and windows xp sp3?
It depends on many different things including but not limited to your budget, hardware, software you are planning on running (some of it is not compatible with windows 7).
Overall windows 7 is more stable than windows xp but requires sufficiently higher resoureses.
How can you compress your files?
There is specific software designed for PDF compression. PDF compression software uses one of two methods to compress a PDF file: lossy and lossless. Lossy compression results in some loss of image quality, but provides the greatest amount of compression. Lossless compression, on the other hand, results in no quality loss, but cannot achieve the same compression rates as lossless compression.
How do you downgrade to Windows ME?
Windows XP Pro enables users to roll back an installation of XP to an original installation of Win98 or ME as long as the boot partition is formatted with FAT or FAT32.
Open Control Panel, open Add or Remove Programs, select Uninstall Windows XP and click Change/Remove.
I would never advise using ME, use Win98se if you have to, its more or less ME but faster but then its not very stable. Use Win2k or XP is my advice.
You'll have to run Fdisk & Reformat, & partition... after you have saved any important files. You will need "all" the Windows ME drivers for each device, if you had WinXP or 2000 they might not work. Making sure to have a Floppy BOOT disk, this is important to get the CD-ROM working for the Operating system to be reinstalled, http://www.worldstart.com/tips/shared/rr1.htm Or go to Microsoft knowledge base. For their instructions.
Why would you want to. Windows ME is the worst OS Microsoft ever came out with! If anything you need to up grade to 2000 or XP.
as of recently, it is impossible to downgrade to windows me, your only options right now are xp (support ending soon), vista (don't do it), 7, and soon to be 8. Those are the only options for windows right now.
How do you format windows 7 operating system?
I'm not sure what you mean. But if you mean that you want to format a hard drive or partion which is not a system file disk/partion. Then it's really easy to do. Start My Computer, right click on the hard drive/partion which you want to format and choose format, then choose file system which you prefer to format, and press ok/start.
What do you do to view hidden files on your computer?
To view hidden folders open Windows Explorer or My Computer. From there select the Tools tab at the top of the window. Then click on Folder Options, from there select "view all hidden folders".
How much for windows that are 6over 6 inside and out?
Window prices vary depending on material, type, and warranties. To find out what the cost is for a window is go to the local hardware store.
Of what use to businesses are records management software?
records management software, and imaging systems assist businesses with large volumes of records. Imaging systems convert all types of documents to digitized electronic data that can be stored and retrieved quickly.
