You can buy an installation tool at most auto parts stores.
With a harmonic balancer puller.
You will need a harmonic balancer puller. Remove crankshaft bolt and washer, reinstall bolt without the washer approximately 10 turns. This will protect the threads in the crankshaft. Install puller and remove balancer. You cannot remove the balancer without this puller. They are inexpensive or try to borrow one.
Remove the belt. Remove the bolt that attaches the harmonic balancer. Rent or purchase a harmonic balancer puller. Follow the Instructions with the puller and remove the old balancer. Install the new balancer making sure to line up the keyway, a little oil helps. Put the retaining bolt back in and tighten to manufacture specs.
do the harmonic balancer have a seal for anti-freezer
Harmonic balancer replace
Remove belt,4 pulley bolts and remove pulley. Remove harmonic balancer bolt and washer,reinstall bolt with out washer,just in about half way.You will need a harmonic balancer puller.These are not very expensive about $20.00 or borrow one from somebody.You just thread the correct included bolts into the balancer where you removed the pulley bolts and will be pushing on the reinstalled balancer bolt.The balancer should clear the bolt head without the washer.This is so you don't damage the threads in the crankshaft.
The harmonic balancer is located on the front of the crankshaft
A bad harmonic balancer can cause a knocking noise. The harmonic balancer doesn't actually produce the noise, but it can cause the noise in the engine.
The harmonic balancer tool is made especially to remove the balancer. Some stores will loan you the tool with a deposit.
how to replace harmonic balancer on a 2000 infiniti i30
hay i am jitendra haldar can you Harmonic progression explane with examples
On any motor, the harmonic balancer is on the front of the crankshaft. It is what the pulley is bolted to.