answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2006-01-07 06:06:44

locate the top radiator hose and follow it to the motor, unbolt the housing it is connected to and remove the old thermostat replace it and put it back together

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still Have Questions?

Related Questions

Where is the thermostat located and how do you replace it located on a 1996 Ford Ranger 6 cylinder?

follow the top radiator hose to the engine, remove it then remove the thermostat housing, remove the thermostat and replace it


How do you replace the thermostat located on a 2000 Ford Ranger XLT 2.3L 4 cylinder?

find the top radiator hose, follow it to the motor take the housing off that the hose is connected too and the thermostat will be there remove the old one and replace with the new and replace the housing and hose


Do you replace thermostat housing on 2002 ranger or just the thermostat?

Just the thermostat and the gasket.


How do you replace the thermostat located on a 1992 Ford Ranger 4 cylinder?

To change that thermostat you need to follow the top radiator hose to the motor from the radiator. It will lead to the thermostat housing on the block. The housing will be anchored with (2) bolts to the block (I think). Take the housing off and the thermostat is housed inside.you will have to replace it with a manufactured suggested thermo(probably 180* or 200 degree thermo).


What steps do you take to remove and replace the master clutch cylinder of a 1992 Ford Ranger?

If you need to replace the slave cylinder it is located in the bell housing and the trans has to be removed. The clutch master cylinder is located on the firewall on the drivers side


How do you replace the thermostat located on a 1997 Ford Ranger?

locate the top radiator hose and follow it to the motor, unbolt the housing it is connected to and remove the old thermostat replace it and put it back together


How do you replace the thermostat located on a 1999 Ford Ranger?

locate the top radiator hose and follow it to the motor, unbolt the housing it is connected to and remove the old thermostat replace it and put it back together


Pictures of how to install a thermostat on a 1984 ford ranger?

The thermostat on a 1984 ranger is located in the lower radiator hose housing connected to the engine, not the top like most vehicles..Fairly easy to replace. Just remove the bolts.. then the housing and the thermostat.


What is the approximate cost to replace a cylinder in a 2003 Ford Ranger?

what sort of cylinder you want to replace?


How do you replace a thermostat in a 1999 ford ranger?

To replace the thermostat, follow the return hose from the radiator to the black plastic encasement which witholds the thermostat. It is pretty tricky to unbolt it from the engine (there are two bolts, one visible and the other is underneath the plastic piece) but that is where the thermostat is located. Good luck


What are the cylinder numbers on a Ford Ranger?

where is the number 3 cylinder located on a 2.5 ford ranger engine


How do you replace the thermostat on a 4 cylinder 1996 ford ranger?

follow the top radiator hose to locate the thermostat housing, remove the hose from the housing then unbolt the housing. remove and replace the thermostat and rebolt the housing to the motor, replace the hose The housing is made of cheap metal and should be replaced. It is important to "seat" the thermostat properly. Also, it is much easier to replace and remove the thermostat housing if you first remove the timing belt housing.


How do you change or replace the thermostat on a 1997 Ford Ranger?

Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.


Where is the thermostat located on a Ford Ranger XLT stuck thermostat?

is in side of the rear main fiuse box


Where is the thermostat located on a 2002 Ford Ranger?

follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to


How do you replace a thermostat on a 4 cylinder 2001 ford ranger?

if it is a V6 you follow the bottom radiator hose to the thermostat housing and disconnect the electrical connector ( the housing is located at the front of the intake manifold) you loosen the hose clamp and remove the hose then take out the housing bolts and remove the housing and the thermostat is right there make sure you put the new one in the same way the old one came out


Where is the thermostat located on an 1989 ranger?

the thermostat is located on the outlet on top of the motor where the radiator hose is connected. remove the top radiator hose from the housing and there is two bolts holding the housing on the head of the motor, remove the bolts and you will find the thermostat. to replace just reverse the order in which it was taken off. hope this helps. john.


How do you locate the thermostat on an 1997 ford ranger?

My 97 4.0 Ranger's thermostat is in the front of the engine. I has two bolts you have to take off. I had to replace the gasket. Leaked when I got on it hard. It's called the "thermostat housing. Thermostat is easy to replace. Great engine.


Where is the thermostat located on a 1997 Ford Ranger?

follow the top radiator hose to the motor the hose is clamped to the thermostat housing remove the housing and you will find your thermostat


How do you replace the thermostat located on a 1998 Ford Ranger?

Follow the upper radiator hose to the outlet/sensor housing then to the head. Remove the 2 bolts on holding the housing to access it.


Where is the thermostat on 1994 ranger with 3.0 L V6 engine?

follow the upper radiator hose back to the engine, and you will find the thermostat housing which is held onto the cylinder head by 2 bolts. The T-stat is located uder the t-stat housing.


Where is the slave cylinder located on a 1997 ford ranger xlt?

The slave cylinder for your hydraulic clutch is located inside the transmission bell housing


Does the transmission of a 1994 ford ranger 2.3l have to be removed to replace the slave cylinder?

yes


Where is the speed sensor on a auto 98 ranger 4-cylinder?

its located on the back axle on the axle housing


Where is the PCV valve located on a 1990 Ford Ranger 4-cylinder engine?

where is the PVC valve located on a 1990 ford ranger 2.3 L