0
Canoes and Kayaks
A canoe and a kayak both small human-powered boats. The difference between a canoe and a kayak is the paddler’s sitting position and the paddle’s number of blades. In some countries, kayaks are a subtype of canoes.
638 Questions
What is a good way to catch a chicken and her babies to pen them up?
One view
Use a large object (blanket, piece of plywood) and "herd" them into a corner. Then slowly and calmly remove them to where you want them. This is usually a 2 or 3 person job.
Another view
If a hen is not tame, it is important to not influence the chicks view of people. If they see their mother freaking out, they will, too. The best thing to do is wait till she is settled at night, and use a box so that you can transport then simultaneously. Reach under her and one by one put her chicks in the box. Make sure she can see them if she doesn't trust you with her babies. Put her in last and move them into the pen.
Another view
You could wait till nightfall and they will go in by themselves or if it's during the day, get some chicken feed and try coaxing them in.
Another view
From now on, you could build a pen where the hen can be kept in, make it easily movable. Light weight something you can move yet the wing cant blow over. Allow the chicks to roam away from momma, but if they get scared they will go back to her. The pen then can be moved daily to new grass so they can still be free raning on new land. Helps fertilize the yard as well.
Canoes do sink. Metal canoes will sink if they are turned sideways and loose their air pocket. Wood canoes normally do not sink if they are not waterlogged as the wood is buoyant. The same can be said for canoes made of other buoyant materials.
What did the canoe represent in the book the pearl?
It represents the cultural tradition of Kino's family. It also represents the family's love and care.
1: Go to google images
2: Type in "Boats"
3:Press enter
4: Enjoy your newfound knowledge of boats
The canoe is mentioned quite often is it a symbol for something?
Yes it is a symbol of luck. The canoe, an heirloom passed down to Kino from his paternal grandfather, is Kino's sole asset in the world. Kino's canoe, which is "at once property and a source of food," has been in his family for two generations.
Why are kayaks virtually unsinkable?
Because they are made to be tough and are filled with air. The buoyancy effect keeps them on top of the water.
How long will it take 2 Welshmen to paddle The Poo Canoe from Dover to Calais?
I am a member of the Poo Canoe team - so I can tell you that we paddle in training in other less streamlined kayaks at about 4.5 miles per hour. We think we'll be able to push about that for the full crossing in The Poo Canoe, and taking the tides into account the crossing will be an 'S-shape' at about 30 miles, so all other things being equal (and assuming that the hull holds out . . we had a major leak in the first water tests) we should be across in about 7 hours . . .
We haven't got permission from the port authorities in France to dock a 5.5 metre poo yet, so in theory at least we could be sitting just off the coast of France for many hours while we negotiate with the "Friends of Napoleon" . . .
What does canoe mean in french?
The French use almost the same word, "canot" for "canoe" as English speakers. Kayak in English is also kayak in French, but in my limited experience there I saw both called canoe-kayak.
The stern is the back of a canoe - or any boat (the front is the "bow"). If you aren't certain which is supposed to be the front or back of your canoe look at the seats. One of the seats will be close to the point of its end, and one will be further away from the point. The one closer is the back of the boat (the bow seat is further away so the paddler has room for their legs)
Don't know if there was more than one manufacturer for "Squaw Canoe" or not, but Rivers & Gilman Moulded Products, Inc. of Hampden Maine, manufactured an "Indian Brand Canoe" labeled as "Squaw Canoe". I believe they are out of business now.
That is the correct spelling of "canoeing" (travelling in a canoe).
How to make a canoe step by step?
Step 1 Lay the soaked bark white side up on the ground and temporarily weigh the corners with rocks to hold it in place while you carefully center the pre-built frame on top of the birch bark. Pile stones on top of the frame to hold everything securely but remove the stones that have weighted the corners. Step 2Carefully hold the bark erect and drive stakes into the ground along both sides of the frame to hold the bark upright around the frame. So that the bark will eventually fit snugly around the frame you'll have to cut several gores in appropriate places before you drive the stakes into their permanent positions. Pieces of extra bark may have to be sewn onto the original piece at this point if it isn't big enough. Step 3 Build the inner gunwales...they should be the exact size of the original frame...and temporarily clamp them into position at an appropriate height on the stakes that are holding the bark vertical. Step 4 Build the outer gunwales and sandwich the bark between them and the inner gunwales. Make and mortise the thwarts into the gunwales temporarily. They will have to be removed later to lift the building frame from the bottom of the canoe. Step 5 Mark exact 2" increments along the gunwales on both sides and with split black spruce root, lash the gunwales to the bark leaving two inches between each lashing. Step 6 Split an appropriate number of 2" pieces of cedar into strips that are about 1/4" or 3/8" thick and carve them to shape with a crooked knife. Step 7 These are the ribs and must be soaked in hot water for several days, then steamed and temporarily bent into position between the gunwale lashings and cut to a final size. Thin cedar sheathing is placed between the ribs and the bark to give the birch bark canoes extra strength. The sheathing is thinner than the ribs and wider...maybe three inches or so. Step 8 Remove the frame and lash the thwarts into their permanent positions. Step 9 Build stem pieces for either end of the canoe and while they're in temporary position cut the bark to their profile. In earlier times the shape of the bow differed from one area of the country to the next but often was determined by how the canoe was going to be used. Step 10Lash the stem pieces to either end of the canoe with split spruce root and at the same time add a small triangular cap. Step 11 Sheath the interior right up to the gunwales insert the ribs in their final positions. Cap the gunwales and secure the cap with wooden pegs which will also secure the ribs. Step 12 Collect lots of spruce gum in a pail and heat it with some fat over a fire. The fat seems to stop the gum from dribbling down the side of the canoe in the sun or cracking in the cold. Spread the mixture over all the seams. Step 13 Carve a paddle. Step 1 Lay the soaked bark white side up on the ground and temporarily weigh the corners with rocks to hold it in place while you carefully center the pre-built frame on top of the birch bark. Pile stones on top of the frame to hold everything securely but remove the stones that have weighted the corners. Step 2 Carefully hold the bark erect and drive stakes into the ground along both sides of the frame to hold the bark upright around the frame. So that the bark will eventually fit snugly around the frame you'll have to cut several gores in appropriate places before you drive the stakes into their permanent positions. Pieces of extra bark may have to be sewn onto the original piece at this point if it isn't big enough. Step 3 Build the inner gunwales...they should be the exact size of the original frame...and temporarily clamp them into position at an appropriate height on the stakes that are holding the bark vertical. Step 4 Build the outer gunwales and sandwich the bark between them and the inner gunwales. Make and mortise the thwarts into the gunwales temporarily. They will have to be removed later to lift the building frame from the bottom of the canoe. Step 5 Mark exact 2" increments along the gunwales on both sides and with split black spruce root, lash the gunwales to the bark leaving two inches between each lashing. Step 6 Split an appropriate number of 2" pieces of cedar into strips that are about 1/4" or 3/8" thick and carve them to shape with a crooked knife. Step 7 These are the ribs and must be soaked in hot water for several days, then steamed and temporarily bent into position between the gunwale lashings and cut to a final size. Thin cedar sheathing is placed between the ribs and the bark to give the birch bark canoes extra strength. The sheathing is thinner than the ribs and wider...maybe three inches or so. Step 8 Remove the frame and lash the thwarts into their permanent positions. Step 9 Build stem pieces for either end of the canoe and while they're in temporary position cut the bark to their profile. In earlier times the shape of the bow differed from one area of the country to the next but often was determined by how the canoe was going to be used. Step 10Lash the stem pieces to either end of the canoe with split spruce root and at the same time add a small triangular cap. Step 11 Sheath the interior right up to the gunwales insert the ribs in their final positions. Cap the gunwales and secure the cap with wooden pegs which will also secure the ribs. Step 12 Collect lots of spruce gum in a pail and heat it with some fat over a fire. The fat seems to stop the gum from dribbling down the side of the canoe in the sun or cracking in the cold. Spread the mixture over all the seams. Step 13 Carve a paddle.
When you paddle a canoe the canoe goes forward which newton law is this?
Third, for every action there is an equal and opposite reaction, you exert force on the paddle and the paddle exerts the same force on the water to propel you forward.
Canoes originated from the Indians in Poquoson, VA. The first canoe is held in the Poquoson Museum.
How do you build a rudder for a kayak?
See my easy to build and affordable homemade rudder for a kayak. Search in YouTube for "Homemade Rudder System for a Kayak".
