Where is the thermostat located on a Dodge Avenger?
If you follow the bottom hose on your radiator it will lead you to it. You will have to remove 3 bolts on the thermostat housing to get to it but it should only take you about 20 minutes to change it out.
How do you change spark plugs on 2008 dodge avenger 2.4liter?
Take the plastic cover off the top of the engine. The plugs are located under here. Each plug has an individual coil. You will need a screwdriver to remove the coils. Unplug the quick disconnect and then unscrew the coil and remove. Replace plugs as normal and reverse the process.
Your 1998 doge avenger wont start but it clicks?
It clicks?What are you talking about clicking? you turn the key to start the car and all it will do is click,click! or when you try to start it it will spin over and then stop and click.!
All I can think of if your car battery isn't good enough to start the car and you will get a click or you have a bad starter and it will only click. need more info
How do you remove the headlight lens of a 1997 dodge avenger?
After you take the headlight out, remove the metal clips holding the lens on. The lens has to be pried off because there is silicone there to keep it together
Where is the battery located on a 2010 Dodge Avenger?
Inside the driver side fender, remove the liner in front of the tire to access.
How many horsepower does the engine in the 2011 Dodge Avenger have?
The 2011 Dodge Avenger's engine produces 173 hp @ 6000 rpm.
How many miles per gallon does the dodge avenger is good for?
on my 2008 2.4 avenger i get around 25 miles per US gallon around town. Cruising at around 80 mph this goes up to 32 miles per US gallon. In the UK that equates to 30mpg and 38 mpg.
How do you fix the timing for dodge avenger?
Auto Zone.com has a repair info guide to help you out. Be advised that is a lot of work.
Where are the fuse panels in 1998 dodge avenger?
You have your main fuse box under the hood. Then you have the junction box which is under the dash on the driver side.
How can you get the crankshaft damper bolt out of dodge avenger?
Easy, Set A long breaker bar or torque wrench on the bolt with the bottom of the handle secured on the ground . crank the engine for a second , and whammo, that will loosen the bolt. The engine spins clock wize and the bolt will be stopped and it will be forced to loosen. done this on many avengers and seabrings. =)
How do you change the tail lights on a 1998 Dodge Avenger?
You have to unscrew the four brass nuts under the felt trunk liner. The light case pulls out off the back of the car then. Once off, turn the individual light housings counter-clockwise to remove them.
96 dodge avenger 2.0 How do you get the crank dampner to go back on all the way?
With the proper instillation tool.
With the proper instillation tool.
How do you replace the brake or turn signal bulb on a 2008 Dodge Avenger?
2008 Dodge Avenger turn signal and/or brake light bulb replacement: Purchase the correct replacement turn signal and/or brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal and/or brake light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).