try manciniracing.com and see if they carry them.
Can you replace just the cable driven mirror in a 1968 dodge dart?
you will probably have to replace the complete mirror, cable and all.
The premium Gasoline is the best fuel for 2013 dodge dart.
should be the same.
What is the point gap setting for 1970 dodge dart 318?
thickness of a paper matchstick or if you have a dwell meter set the dwell at 30 degrees.
How do you set the ignition point on a dodge dart?
install points and have felt pad resting on center peak of one of the cam lobes in the distributor, if you use a paper match stick between the points and then tighten the adjuster down you will be real close, if you have a dwell meter you want to set the points between 28 degrees and 32 degrees.
What is point gap on 225 dodge slant 6 motor?
I forget what the setting was but if you set them with a paper match stick it will be real close.
What is the wheel base of the 2013 Dodge Dart?
The 2013 Dodge Dart has a 8 ft. 10.4 in. (106.4 in.) wheel base.
What is the drag coefficient of the 2013 Dodge Dart?
The 2013 Dodge Dart has a drag coefficient of 0.29 Cd.
How do you locate the fuel pump on a 1967 dodge dart?
it's on the passenger side of the engine block, just follow the fuel line from the carb down and it screws directly into the fuel pump.
How much horse power did the dodge dart swinger 340 have?
factory rated at 275 horse but it was under rated, more like 300 horse.
What is the distributor rotation on a 69 Dodge slant six?
I would say counter-clockwise but if you take the distributor cap off and have someone turn the engine over as you watch the distributor you will be able to see which way it turns.
What is a voltage limiter on a 1971 dodge dart?
there is a porcelain block on the firewall called a ballast resistor that limits voltage to the starter and there is also the voltage regulator that regulates voltage to the battery.
Does a 1974 dodge dart rear end fit in a 1969 dodge dart?
only way to tell is measure the length of it from inside hub to inside hub and measure the spring perches as to how far in on the axle that they are welded.
How do you rout vacuum lines on 74 dodge dart?
To route vacuum lines on a 1974 Dodge Dart, start by identifying the vacuum sources, typically from the intake manifold or carburetor. Ensure that lines are connected to the correct components, such as the brake booster, HVAC controls, and any emissions equipment. Use proper fittings and avoid sharp bends to prevent kinks in the lines. Finally, check for leaks and ensure all connections are secure for optimal performance.
Why do some 68's gts have center nose piece IT'S ON A 1968 dodge dart gts?
all GTS's had the nosepiece.
What year doors will fit 1968 2 dr dodge dart?
I,m pretty sure 69 will fit and possibly 67.
all years 1967-1976 will fit- 1967-72 have the metal inside tops and vent window- 1973up are plastic w/o vent window but will bolt up