Flooring

I have painted car and applied spray on bed liners for about ten years and the biggest key to getting bed liner to stick to wood is texture. Primmer is not going to help enough to be worth the cost what you should focus on is to sand the wood and make sure befor appling the bed liner is to GET IT CLEAN.

Single-lap tiles offer several advantages, including ease of installation, as they require fewer materials and less labor compared to double-lap systems. Their design allows for effective water runoff, reducing the risk of leaks and water damage. Additionally, single-lap tiles can provide a more streamlined aesthetic, making them suitable for various architectural styles. Finally, their lightweight nature can reduce structural load on roofs, making them ideal for a range of building types.

3/4" usually, but some homes have double layers of plywood or 3/4" ply and 1/2" of particle, manufactured homes sometimes have 1/2" particle board subfloors. The best way to check is to pull a floor vent off and use a mirror and look yourself.

Many footwear showrooms have a medium to dark, neutral coloured, fine patterned, low twist pile, hard wearing carpet as the floor covering. This is used because it:

* gives a more luxurious and welcoming feel to the space than most hard surfaces

* does not clash with a wide range of shoe colours and makes them more prominent

* is firm enough for the shoes to be tested for comfort * does not create drag in the way a deep pile would, making walking more difficult * does not highlight the shoes' stiff newness as a hard floor might

* is easy to keep clean * does not show small dirt particles

* is durable * does not mark easily, such as from black rubber soles or sprigged shoes or stilettos * conceals any minor flaws in the smoothness of the flooring.

Some specialist shoe showrooms may have hard surfaced areas for specific uses, such as running shoes. These can be covered in durable linoleum or hard wearing types of vinyl. A fine pattern helps to hide flaws dirt particles and marks.

A 4 inch by 4 inch tile is 16 square inches. 60 square feet is 8640 square inches. Dividing the one by the other shows us that 540 tiles 4 inches on a side will cover an area of 60 square feet.

What causes the cracks is rapid temperature changes--if you were to leave the heat off for a week, then come home and turn the furnace on for a couple days, then leave for a week and so on, you'd get cracks. But if you were to let the house sit over the winter, allowing it to gradually change temperature, you'd be fine. (This omits the effects of mold.) This actually happens all the time--if a manufacturer builds a manufactured home in December and parks it in the storage yard until it sells in April, it will sustain freezing temperatures for several months without damaging it.

If you're already familiar with the industry, then you may want to check out cfi-installers.org. They are an independent organization that certifies floorcovering professionals across the United States.

They offer many different types of certifications, and referrals to consumers as well.

1 foot = 0.3048 square meters 19 feet X 20 feet = 35.3031552 square meters

225 square feet. This is an easy calculation - just multiply the length by the width. The answer is the number of square feet.

Total, there are 48 inches all the way around a 1 foot square tile.

No, no no. Steam cleaners put way to much moisture onto floors regardless of what their ads claim. Nearly all manufactures exclude damage caused by them.

Hardwood should not be steam cleaned. Virtually every hardwood flooring manufacturer states that steam on a hardwood floor in time will damage it. Forcing steam down into the seams of the floor will inevitably cause moisture damage.

Not the best idea. Hardwood floor should be angle nailed down, but obviously you cant do that. I think hardwood flooring would dry out and separate in places if glued.

Not always. porcelain uses a certain type of clay, where ceramic is all clay. Ceramic tiles are called porcelain when they are non-porous. Another term with the same meaning is fully vitrified. These tiles can be used outside without being damaged in frosts, when any water that had soaked in would expand and damage the tile.

I can tell you of an Indian brand of wax polish which has more than 60 years of rich history behind it - Dazlo (Regd.) Wax Polish. It is pure and is being made from the most traditional waxes from the nature. It is perfect to apply and leaves the surface shining like new. It can be applied to a wide range of floors and furniture.

Even before Reckitt began manufacturing Mansion Wax Polish in India, Dazlo (Regd.) Wax Polish was being manufactured and sold across India.

Email: waterloo.india@gmail.com

Ph.:+9198107-80575

A running yard has a length of 1 yard. The width is defined by the merchant selling the product. 8ft wide marine carpet sold by the running yard would be 8ft X 3ft per running yard. 54in fabric sold by the running yard would be 54in x 36in per running yard.

tiles are 12inches by 12inches,and your kitchen measures12feet by 14feet.how many tiles would you need?

96 square feet. To calculate square feet simply multiply length by width - the result is the area in square feet.

you trim it

Acetone or mineral spirit.

Murphys oil soap

Polished tiles will have the design half d body so they are more durable whereas glazed tiles wl have oly the top layer design so its not durable.

There are these things called Magnetacks that will hang up your carpet without damaging it. They use magnets so they don't actually puncture or damage your carpet in any way like tape or thumbtacks would.

Usually yes, a well insulated sub-floor will save you lots of money from heating. You can choose to build a sub-floor on 2x4 lumber with moisture barrier or use those sub-floor tiles (usually come in as 2x2).

1 yard = 3 feet

12 feet = 4 yards

10 feet = 3 and 1/3 yards

Total area of the room 10 feet x 12 feet (120 square feet), or 4 yards x 3 and 1/3 yards.

= 13 and 1/3 square yards

You will need 13 and 1/3 square yards of carpet to cover a room or 120 square feet. Depending on how the carpet store measures it.

Also, buy a little extra! 14 square yards would be a good bet. Consult your carpet dealer for more help if needed.