0
Ford Fusion
The Fusion refers to two distinct car models produced by the Ford Motor Company: the Fusion hatchback sold in Europe from 2002 to the present; and the Fusion sedan marketed in America since 2005.
955 Questions
How do you reset door entry code on 2008 Ford Fusion door?
KEYLESS ENTRY SYSTEM
With the keyless entry keypad, you can:
• lock or unlock the vehicle doors
without using the key.
Your vehicle has a factory set 5 digit
code that operates the keyless entry
system. You can also program your
own 5 digit personal entry code. The factory-set code is located:
• on the owner's wallet card in the glove compartment
• or at your dealer.
When pressing the controls on the keyless entry keypad, press the
middle of the controls to ensure a good activation.
This system will disable the power door lock controls. These will not
work until the vehicle is disarmed.
Programming your own personal entry code
To program your own code:
5. Enter factory set code (keypad will illuminate when pressed).
6. Press 1/2 control within five seconds of step 1.
7. Enter your personal 5 digit code.
Enter each digit within five seconds
of previous one.
8. After the code is entered, the
locks will cycle, confirming that the
new code has been set.
Do not set a code that includes five of the same number or presents
them in sequential order. Thieves can easily figure out these types of
codes.
Your personal code does not replace the permanent code that the
dealership gave you. You can use either code to unlock your vehicle. If a
second personal code is entered, the module will erase the first personal
code in favor of the new code.
Locks and Security
149
Locks and Security
If you wish to erase your personal code, use the following instructions:
1. Enter factory set code.
2. Press 1/2 control and release.
The system will now only respond
to the factory set code.
Anti-scan feature
The anti-scan feature prevents
repeated attempts at arriving at a valid key code.
The keyless entry pad is disabled for 1 minute after 7 unsuccessful
attempts (35 consecutive button presses) at entering a valid key code.
The keypad will flash during this 1 minute mode. However, the 7/8 and
9/0 controls will still lock the vehicle.
Anti-scan will be turned off after:
• one minute of keypad inactivity.
• the remote entry transmitter UNLOCK button is pressed.
• the ignition is turned to the ON position.
Unlocking the doors with the keyless entry system
To unlock the driver door, enter either the factory set code or the
personal code (each digit must be pressed within five seconds of the
prior digit). The interior lamps will also illuminate.
To unlock all doors, enter the factory set code or personal code (driver
door unlocks) and press the 3/4 control within five seconds.
Locking the doors with the
keyless entry system
It is not necessary to enter the
factory or personal code prior to
locking all doors. To lock the doors:
• with the driver's door closed, press the 7/8 control and the 9/0 control
at the same time.
Locks and Security
150
How does the cd 6 mp3 in a 2008 Ford Fusion player work?
Like any other 6-cd changer. It has a rack with 6 slots in it, with the motor and read laser able to swing to the side and raise/lower to the current cd's level.
What is the wheel base of the 2012 Ford Fusion?
The 2012 Ford Fusion has a 8 ft. 11.4 in. (107.4 in.) wheel base.
Can you turn off airbag in 2006 Ford Fusion?
No, it is illegal to turn the air bag off. However you can ask the NHTSA for permission to have a switch installed to disable the passenger air bag. They may or may not give you permission. Contact them at the link I will post. Click the link.
Where is the factory set keyless entry code located on a Ford Fusion 2011?
Look under dash by brake pedal. There is a white sticker located next to the fuse box, it has 5 digits on it thats the code. my sticker was white it with a green and blue dot.
Where is the fuse located for 08 Ford Fusion cigarrette lighter?
In the fuse panel below and to the left of the steering wheel by the brake
pedal ( it has a cover on it )
( # 15 is a 20 amp fuse for the cigarette lighter in a 2008 Ford Fusion )
Where is the block heater cord on 2006 Ford Fusion?
If it has a block heater the cord will be somewhere on the front of the car, easily accessible. Unless it is a Canadian car or it was ordered as an option it will not have one.
When did Ford Fusion come out?
In North America , the first model year of the Ford Fusion was ( 2006 )
Where is the location of the cabin air filter in a 2006 Ford Fusion?
There is none actually equipped. If you take off the glove compartment door you can see where you can cut a hole and add a filter, if you find the right size.
Does the Ford Fusion hybrid have a fuel filter?
I was looking at the Ford Fusion Hybrid owners manuals ( from 2010 to 2012 )
and they show that it has a lifetime fuel filter that is integrated with the fuel
tank and that no regular maintenance or replacement is needed
What is the drivetrain warranty on the 2014 Ford Fusion?
The drivetrain warranty of the 2014 Ford Fusion is 5 yr./ 60000 mi..
Where is engine block heater in fusion?
there isn't one that i know of. usually they are only in trucks to help them start in the winter
if you are asking i presume you already have one that is not working.to repair it you must first acquire a new block heater from any reputable car parts vendor . then you must lift the front end of your car,place on jackstands,slide underneath and locate the old block heater. once you have done this ,empty antifreeze,slide underneath the car unscrew the old block heater,this may take a little prying and insert and tighten the new one making sure not to overtighten. now connect the new wire that came with the block heater and route it to the front of the vechicule preferably away from any pulleys belts or moving parts.refill with new antifreeze and check for leaks.if none you have completed the job and give yourself a big pat on the back.
What is the typical MPG of a 98 Mercury Villager in the city?
I have a 1999 Mercury Villager Estate, with the 3.3 liter V-6. I don't drive the van only in town, I have about a 10 mile trip at 55 - 60 mph to and from work, with some other short trips. I average about 17 mpg doing this, on the highway I get about 20 mpg. Hope this helps.
How do you remove the driver airbag in a 2006 Zephyr or Fusion?
There is a hole on each side of the steering wheel. Insert a 3mm rod or allen wrench into the holes and push. You are compressing a round straight spring that locks into a notch on each the airbag retaining pins. The airbag will come right out and you can then work removing the wire connectors, most likely they are melted and must be destroyed. Do NOT remove any of the trim on the steering wheel. It is not necessary.
How many quarts of oil is in a 2007 Ford Fusion 4 cylinder?
According to the 2007 Ford Fusion Owner Guide :
For the 2.3 liter four cylinder engine :
( 4.5 quarts with engine oil filter change )
How much oil does a 6 cylinder 2008 Ford Fusion require?
It requires 6.0 quarts of SAE 5W20 oil with filter change.
What is the base engine size of the 2011 Ford Fusion?
The 2011 Ford Fusion has a 2.5 L base engine size.
http://www.fordfusionclub.com/index.php?topic=152521.0
This site has a great review about how to do this.
What size gas tank does the 2010 Ford Fusion have?
23gal
===========================================================
According to the 2010 Ford Fusion Owner Guide :
Front wheel drive ( 17.5 U.S. gallons )
All wheel drive ( 16.5 )
Is there more than 1 oil filter on the 2008 Ford Fusion?
On the four-cylinder model, there were two different STYLES used, but your car is going to be one or the other -- not both. It's either a cartridge style or regular can.
How remove front right turn signal on 2006 Ford Fusion?
I'm fighting with it too, looks I'm going to remove the fill tube for the washer fluid....and go from there
