0
Ford Mustang
The Ford Mustang is a famous compact car built by the Ford Motor Company. The first manufactured Ford Mustang, a white convertible with black interior, was launched on April 19, 1964.
1,730 Questions
Where is the engine ID number located on a 1996 Ford Mustang?
Most cars have the VIN number in the window on the lower driver's side, viewed from the outside. There's a ~4" 'window' to view it through.
How much does a Ford Mustang gt weigh?
I THINK IT IS AROUND 3300 POUNDS.
Mustang Gt 2010 4.6 V8(weight without passengers and full fluids including full tank of gas)Curb Weight MT3533Curb Weight AT3575
Where in a 1991 Mustang 2.3L the Constant Control Relay Module is located?
Passenger side engine compartment, bolted to the inner fender strut tower. Directly behind the stock airbox location. Rectangle, roughly 3" x 5". About 2" thick with a large harness plugging into it.
What is that annoying ticking noise mustangs make when you change the oil?
The ticking sound is coming from the valve lifters. When the oil filter is changed, air is introduced into the system, which causes air bubbles to form in the oil. This causes the valve lifters to "leak down", which is what causes the ticking sound. It can take several days for the bubbles to dissipate. It's annoying, but harmless.
Regular or premium gas 2006 mustang gt?
" regular " unleaded , 87 octane ( according to the Owner Guide )
Why did my check engine light come on after changing my battery in my 2005 ford mustang?
Usally that means the battery has been disconnected within the last 10 starts
What types of Ford Mustangs are there?
This question isn't very specific, but here's some to think about.
The mustang has been in production since 1964 as a 1965 mustang. The very first ones are referred to by enthusiasts as 1964 1/2 mustangs.
The earliest cars came with either an inline 6 cylinder engine, a 260 inch V8 or a 289 Cubic inch high performance engine.
Early classics were available as a coupe, convertible and later a fast back. a GT option, featuring a stronger motor and other improvements was the beginning of Mustang performance.
As they got older they became heavier and although power increased steadily in the late 1960's and early 70's, emissions laws and expensive gas made for a decrease as well as heavier cars.
Ford offered the GT, a Shelby GT350 and later a GT500, with a 428 cubic inch engine.
Later cars included the Mach 1, the Boss 302 and 351 and the huge Boss 429.
Later "tuner cars" included Roush and Saleen, and were much like the early offerings by Shelby, taking stock cars and improving performance,handling,and modifying the looks as well.
Does a shelby cobra mustang go faster than a m5 BMW?
How wide is the 2004 Ford Mustang?
The 2004 Ford Mustang is 6 ft. 1.1 in. (73.1 in.)1 one-touch power windows wide.
How much could a person expect to pay for a new Mustang GT 500?
The new version was first presented in LA auto show two years ago. The basic model has starting price of 60 thousand dollars and the price can reach 113 thousand dollars with all the extras
Where is the fill up for clutch fluid for 96 mustang?
Actually , the clutch on a 1996 Ford Mustang is not hydraulic , it is operated by a cable so there isn't any clutch fluid
How much horsepower does a V8 Mustang GT have?
You could be more specific because they made Mustangs starting with the model year 1964 1/2 with several V8 options.
Why wont my Ford Mustang coil not fire?
if you have a new coil then it is probally going to be the ignition module located on the distributor.
How do you set distributor on mustang?
Once you start motor, warm it up, then fine tune the distributor to timimg mark for your engine/year. Marks are located on a "tab" which sticks out of the timing chain housing. To time, rotae the dist very slightly until the mark on the harmonic balance (big round piece of metal with pully on it coming out of cover) lines up with the appropriate mark on the tab. You'll need a timing light to see this. Note: If you replace the points, make sure they are adjusted correctly first or it will not start. If the distributor has been taken out, or "disturbed", the easiest way is to take outnumber one spark plug (V-8 is first one on left side), turn motor until piston is at top of compression stroke (put a staw in the hole, when it pops out, that's the comp stroke - adjust until it's at the very top, ie, a little more and it starts to go down). Put distributor in engine with rotor pointing as near as possible to number one contact on dist cap. [you'll have to see which one that is by following the wire. You can mark a spot on the motor as you put the dis in and out until it lines up -- the dist will rotate about 1/4 turn as you insert it.
How do you get a mustang on Howrse?
1. Buy it off auction
2. Get the Mustang Card
3. Your mare gets pregnant with one
How do you replace the manual passenger side window in an 89' mustang?
You will need to remove the inside door panel in your 1989 Ford Mustang. Remove the window retaining clips. The window will lift out. Reverse the process to install the new window.
Mr. Phil (Phillip) Clark came up with the idea for the Mustang two seater car while he was in Nashville, Tennessee on his way to California for the Art School of Design. He saw the running horses (wild Mustangs) and wanted to have that as his icon on the car he would create. First he gave the idea to GM (see Witzenberg Doc, 1971 about the GM Mustang) but that didn't work out..then in Advanced Design and Research, a place funded by Grants ETC, the car was completed in Clay--the Team that completed the Car included Jim Quinlan, Jerry Malinowski and others. The Car was liked by the Lincoln Mercury division Head, Eugene (Gene) Bordinat. Phil Clark had also designed several running horses for the car. The 1962 Two seater has one running horse on it, and then in 1964 it had been sent back to CLARK and Malinowski to "Streamline" into a one piece emblem to replace the original Cast two piece emblem. This emblem was put onto the production cars--after it went through a couple of others, see www.ponysite.de for more Mustang history. The Two seater was the forerunner of the Re-designed Falcon. Phil Clark's Mustang Coupe design can be found in the 1963 Fall edition of Motorcade Magazine, signed by him.
Joe Oros and Donald Frey and others worked on the production car, and some of Clark's ideas transferred onto the car--scoop ideas, horse and some other minor adjustments. The Car was begun in 1962 to get ready for the 1964 Worlds Fair.
The Prototype MUSTANG was a great marketing Scheme By Lee Iaccoca to launch the re-skinned Falcon sells..as they had many Falcon bodies left over. Along with the Advertising (J.Walter) group, Ford took the prototype to colleges in a time when T.V's were scarce and word of mouth would get around that Ford had a Race Car equal to the Corvette that was affordable..and everyone wanted one..so when it came out with just the scoop idea added and of course the Running Mustang Emblem, everyone wanted it..because Ford spent two years carrying the two-seater around to Market the re-skinned Falcon.
You can thank motivational management techiques for the original Mustang design, abetted by a shrewd chief designer, Joe Oros. Oros first worked for GM in the 1930s and early 1940s, then joined the independent George Walker group that shaped the vital all-new 1949 Ford and the cars and trucks that built on its timely success. When Walker became Ford's in-house design vice president in 1955, he made Oros an assistant, then named him to head the Ford Studio in 1956.
Though Oros would supervise the design of almost every U.S. Ford-brand vehicle over the next dozen years, the Mustang was undoubtedly his biggest success as studio chief. Ironic, then, that his team's winning design was something of a rush job, just like that '49 Ford. Here, in his own words, is how Oros remembers the birth of the 1965 Ford Mustang prototype.
Lee Iacocca wanted a car that was more of a personalized, sporty four-seater rather than a tight, European 2+2 package. Gene Bordinat requested proposals for it from our Ford studio, Lincoln-Mercury [and Corporate Advanced]. Oros remembered Clark fondly as one of the most talented designers of that time, and said so as Clark's original designs were revealed at the 40th Anniversary of the Mustang in Nashville, Tennessee....Clark had been almost forgotten until that day his daughter revealed the family treasure kept quiet for so many years. Clark started in Advanced Research and Design (a new named department in that day), freelancing. Was recognized by Eugene Bordinat, who took two seater design from the Advanced design Studio and worked on in in the L-M Studio. Clark then worked closely on the project UNDER Bordinat, and many others were brought in. In the Meantime, Frey's group was working on the 4 seater design. At some point the two came together--Mustang Prototype and Mustang 4 Seater redesigned Falcon. Ford's Benson Research tells the story of the 4 seaters guys fighting the Mustang Name that had been marketed for years to the appropriate age group and women--and those wanting FORD to produce a Race Car Program; so at the last possible minute the Cougars on the 4-seater were replaced SECRETLY and the 4 seater Falcon was then presented to the Public as MUSTANG...it would seem the name grew on both groups after a time---and stuck...along with CLARK's Original (streamlined version) of his Running Horse.
What are the dimensions of a 1965 mustang?
Wheelbase108"Track f/r56"/56"Height51Width68.2"Length181.6Weight2860-3280lb.
How many quarts of transmission oil does a 2001 ford mustang need?
5-6qrts mercon v engine must be on check all your levels.
What rear facing infant car seats work best in a ford mustang?
I have the Graco Safeseat. It has been wonderful. Our daughter is 16 months old now and still comfortably fits in her rear facing seat. I am currently searching for a forward facing. You can't be a very tall person and sit in front of the carseat. Not with any type. But it can be done...you just have to sacrifice some leg room.
