Glue and Adhesives

you have to use a hot glue gun.

PVA glue is able to soak into porous items like wood and paper and form a fairly strong joint as it's 'carrier' evaporates.

i find that if you soak it in water for awhile it removes most of it but that might not work depending what you super glued. like if you super glued a phone you cant exactly soak that in water.

Acetone (nail polish remover) to help dissolve it. Soap and water to clean off the residue. Repeat as needed. That stuff is really amazingly tough!

You can't remove Super or Krazy glue from fabric.

Yes it is. Many glue vapours destroy brain cells, and if you inhale it, you don't have enough of them to begin with.

I think that oakley will repair or replace damaged lenses

At least since the 1400's and probably much earlier.

Crazy glue is a cyanoacrylite.

Super glue, or take it to a glass-blower and have him 'weld' it with glass.

it would work if you glued one facet of the gem to the glass

Crazy Glue is not healthy for you, not to mention it could be a pain to get it off. I do not suggest this method- use nail glue.

Honestly, don't be more concerned about your fake nails than you are of your health.

Always, and I mean ALWAYS keep a huge bottle of aloe vera gel with lidocaine, lid off, within arm's reach. Just gob it on generously if you burn, it draws the heat out quickly, preventing tissue damage. Leave it on the burned area for a few minutes, take a break: it will make a difference. Apply as often as possible; no cream based medication either because the "greasy" ones seem to hold heat in. Water based gels do not seem to retain heat, which must be part of the reason they feel so cool. When the glue falls on your skin, it sticks because it literally melts flesh with the heat. So be careful, and get the aloe vera gel!

Cut the weft to the size you want, then put the glue on the top of the weft. Let it sit for 30 seconds then press it on the top of your section. Make sure to glue it to the hair not to the scalp.

it could be possible . it's just paper.. so I don't see why you couldn't

1.polyester

2.silk

3.cotton

tile to wood? not a good idea. certainly not with adhesive. rip up the tile. it'll be worth the extra effort and expense

Elmer's Epoxy and Elmer's Spray Adhesive will stick to plastic wrap. - Elmer's School glue and Elmer's Glue -All will NOT stick to plastic wrap.

Glue and Glass I'd say both Glue helps things when u need to put things together and it is really good for projects and also to fix broken things. Glass can help u drink beverages and it helps u see better thats what glasses were made for. Sometime a days when u are blind and u look through a glass u could see better because glasses and glass are the same but don't try to get blind and look through a glass it can cause really bad things for ur eyes.

That is a collage.

"de la colle"

school glue

From my experience, It is recommended to remove as much existing glue as possible then apply a sealer just for this purpose available at your local hardware store or tile shop. This creates a positive bond and will ensure a long lasting tile installation.

Take note that if your glue down flooring is glued down well and is not loose or coming up they make a couple of products that prep this flooring which allows tile installation to be applied right on top. I have not personally used this as I am an old school type of installer however I hear that these products work well.

StraferX