Home Appliances

If your washer won't spin, it could be due to a broken drive belt, a faulty motor, a clogged drain pump, or a malfunctioning lid switch. Check these components to troubleshoot the issue and determine the necessary repair.

No, and this is a very good energy saving practice.

As with any other light bulb or other appliance, it depends on how many watts you use. Since your electric bill is predicated on how many kilowatt hours you use, an example would be the mercury vapor lamp is 1500 watts, and you use it for six hours a day for 20 days... for each hour you use it, the cost is 1.5kW X whatever the utility charges you X the number of hrs, which in this case is 120hrs.

Yes, high altitude can affect the drying time for clothes in a gas dryer. The lower air pressure at higher altitudes can lead to reduced evaporation rates, making it slower for clothes to dry completely. It is recommended to adjust the drying time or temperature settings on the dryer to compensate for the effects of high altitude.

It could be caused by a damaged heating element. You should have the heating element checked by a professional. Try cleaning the dryer first. Remove lint clogging the exhaust vent. Overheating in the washer might cause the heating element to shut off safely. Also check if the dryer is plugged correctly.

Although it is called a vacuum cleaner, it does not actually create a vacuum.

Inside the cleaner there is an electric motor which drives a fan blade. This fan blows air out of the vacuum cleaner and this causes air to be drawn in to the cleaner at the other end. Thus the cleaner works by creating an air flow, not a vacuum.

No, it is not safe to plug a British device directly into a 220v US NEMA 6-20 outlet using an adapter. The voltage difference may damage the device and pose a safety hazard. You would need a voltage converter to safely use the British device in the US.

Most modern washing machines today have sensors that will determine how much dirty laundry is inside the drum. This will then allow the washer to fill the drum with just enough water to clean the dirty clothes. There are also dirt and moisture sensors in washers. It senses dirt in clothes to determine the right amount of cleaning time.

I've found that this happens when a bit of Fabric Softner gets on the clothes.

Sounds ridiculous, but there needs to be plenty of water in the machine, dont pour the softner DIRECTLY onto clothes, & not at the same time as detergent either-as these can both cause the greyish spots.

I've ruined LOADS of clothes this way, I just decided to switch to Fabric Softner Sheets for the dryer only.

Haven't had a single spot since!

The wires leading to an electric iron remain cold because they are made of materials that have low resistance to the flow of electricity, causing minimal heat to be generated. In contrast, the heating element inside the iron is specifically designed to have high resistance, causing it to heat up when electricity flows through it. This allows the iron to reach high temperatures for efficient operation while keeping the connecting wires cool.

Yes, a clothes dryer typically runs more effectively when it is full because the clothes inside help to absorb moisture and facilitate better air circulation for faster drying. This can lead to shorter drying times and more efficient energy use.

no.it is the same thing as dew

There could be several reasons for a washing machine not rinsing and spinning, including a faulty lid switch, clogged drain hose, or a malfunctioning water inlet valve. It's best to check these components and consult a professional if needed for further diagnosis and repair.

Laundry detergent typically consists of surfactants to remove dirt and stains, enzymes to break down proteins and oil-based stains, builders to soften hard water and improve detergent efficiency, brighteners to enhance appearance, and fragrance to provide a pleasant scent. Additional ingredients like stabilizers and anti-redeposition agents may also be included.

Add 20 lbs if it contains a 20lb Turkey, Turkey

The same as anywhere else in the world! The answer depends entirely on the size of the unit. To get some idea of the power used by different household electrical appliances go to any shop which sells them and read the information displayed about each unit.

A clothes washer typically uses a water level sensor to determine the amount of water needed for a specific load size. This sensor can detect the water level in the tub and stop filling it once the desired level is reached. Some washers also have preset water level options based on the selected cycle.

Radiators produce heat by transferring thermal energy to the surrounding air in a room. They are part of a heating system that uses hot water or steam circulating through the radiator to warm up indoor spaces.

Yes, you can use bleach in a HE (high-efficiency) washing machine, but you should use it sparingly and follow the manufacturer's instructions. Make sure to dilute the bleach properly and add it to the designated bleach dispenser in your machine to avoid damaging the machine or your clothes.

Entering a running washer machine is extremely dangerous due to the risk of drowning, electrocution, or getting trapped in the moving parts. The agitator and spin cycle can cause serious injury or death if a person is inside the machine while it is in operation. It is never safe to enter a washer machine while it is running.

Probably not very many! A microwave will probably max that out right away. You may be able to run two 2-slot toasters on 1300 watts. Two or three small TVs may run on 1300 watts. Perhaps 3 or 4 box fans will run on 1300 watts. On a 120 V circuit, 1300 watts will draw a little less than 11 Amps.

Usually there is only a few things to keep a dryer from starting, 1 - one leg of your power is out. The dryer runs on 230 volts but the motor is only 115 volts, so if one side of your breaker is bad or one fuse has opened the motor might not run, 2 - door switch could be bad, 3 - timer could be bad, 4 - motor itself is bad, if the start winding is open usually the motor will just hum and not turn the drum.

A thumping noise from a dryer could be caused by a few different issues such as an unbalanced load, worn drum support rollers, or a damaged drum seal. Inspect the dryer drum and components for any visible signs of wear or damage and make necessary repairs or replacements. If the problem persists, it may be best to contact a professional technician to diagnose and resolve the issue.

Oxygen bleach, such as hydrogen peroxide or sodium percarbonate, is effective at removing stains because it breaks down the components of the stain without damaging the fabric. It is safe to use on most fabrics and colors and is effective at removing both organic and inorganic stains.