0
Model Making
Questions about making models, such as cars, rockets, airplanes, or other models.
287 Questions
How do you make working model of hydraulic lift?
You could use tap pressure, a connecting pipe and a balloon.
What glue should you use for your diorama?
The best glues for dioramas are Super glue, white glue and TiteBond ll. I use both for different purposes, the TiteBond for attaching parts to the base and Super for building trees etc. and the white glue for attaching grass.
What is a disadvantage of making a model?
its because it doesnot provide flexibility to the constructed models in which they are going to be manipulated after the rigging process..
How do you make a working model of rainbow?
The effect is the same as when you have a thin film of oil on water. You can also use a hose with a very fine spray mist, pointed into the air on a sunny day and see a real rainbow if you stand in the right place.
What is occurring when you can see your breath on cold days?
The air that you exhale contains water vapour. When you exhale during a cold day, the relative humidity increases. Relative humidity is actually the percentage of the amount of water vapour in the air.(the maximum amount of water vapour that the air can hold at that temperature) The colder the air, the less water vapour it can carry. When exhaled, air mixes with cold air, the temperature of the exhaled air drops, but there is more water vapour. When the air becomes saturated, (relative humidity is 100%), the extra water vapour will condense, allowing you to see your breathe on cold days.
How do you make working model on street light?
Most objects do not give off their own light; it has to reflect light to be seen. Shine a laser onto a mirror and hold a piece of paper up in front of the mirror, watch how the rays bounce from the laser to the mirror and off onto the paper.
How do you make people out of playdough?
To make people is simple and complicated.
1.) Find a picture of the person you are planning to make. If its a random person try to sketch out what you want to look like.
2.) Get all the colors that are going to be in the person.
3.) Roll a ball for the head and a long oval. Flatten the end of the oval so the person will stand. Also, flatten the whole oval a bit so it looks like a ovalish rectangle.
4.) Pinch a small section in the middle of the face for the nose. Then, use your pinkies or finger to make indents on both sides of the nose and a little above look at your own face to see what a nose looks like and where the eyes should be.
5.) Take the oval you rolled out and almost have way, use a knife or tooth pick to cut a slit not not all the way down (The oval should be quit thick so it can stand)
6.) Make to more the same size ovals for the hands. Make the hands do what ever you want them to. Be creative!
7.) Draw on with a tooth pick the clothes and all that. You could also add on peices to the person to look like clothes.
8.) Add on thee hair. Either roll out worm shapes and put them on peice by peice (would look more real) Or flatten a large peice of play doh and stick it on the head then do scratch marks.
9.) Add the details on the details on the eyes and the mouth.
10. Conect all the peices.
TIPS
1. Scrath both peices before connectibg to ensure they stick.
2. Squish play doh ALOT in hands then roll into a ball. This will get ride of most cracks.
3. Ley play doh dry in open DRY places.
4. Poke small little holes in random places to dry faster.
5. Put a tooth pick in the bottom of the person so keep them up.
WARNINGS
1 Play doh might get salty when drying.
2 Dont poke a lot or too deep of holes because your creation might look weird or collapes.
3 If your hands arent clean, dust and other colors will get in to your creation.
Hope this was helpful!
~Alyssa Tarry
What to make an Alamo model out of?
You glue all the sticks together and cut the edges to make them stand. make sure to put sticks all around. then you can design it.
How do you make a working model on maths?
1.(a + b)²
This is easy. On a piece of paper, make a square of length (a + b) [Choose a and b as per your wish t be any two lengths].Its area represents (a + b)². Make another square of side a, and another of side b.
Make a rectangle of side 2a and b or 2b and a, whichever is convenient.
Put the side a square, side b square and the rectangle on the bigger square of side (a + b). You can show that this fits perfectly, thus proving the identity.
How do you make a working model of dam?
First take a bottle of water and put a small motor inside it. then take a tube and paste it on the top of the bottle after that make a slide from the tube that help it to come down easily. Now yourDAM is ready
When was john daltons atomic model billliard model made?
see along time ago before dinosaurs walked the earth.
the end.
How do you make a model lighthouse?
i think you need a light bulb a clear fruit pot a pringle pot containing the lid,screawed up news paper for the rocks around the light house and more news paper to paper macha the pringle pot but not the lid, a peice of coloured card to stick your rocks and light house too,you may also need a babys bottle teet for the top of the light house also you may need pipe cleaner and lolly pop sticks for the balcony bars where you would stand to clean the fruit pot so that the sailers can see that there going to crash and any kind of thing for the platform of the balcony thats it for now hope you enjoy trying to fid out which bit goes where.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
How do you make a copper color?
There is no perfect way, but gold with a tiny dash of red comes close.
How to make working physics model?
There are several ways one can make a working model of an earthquake. You can use an empty 2 liter bottle, clay, baking soda, and dish detergent to make a working earthquake.
How do you transfer your decals on to a airfix model?
Carefully cut out required decal. Soak in a dish of water until decal separates from backing card. Apply decal to desired area (preferably with tweezers). Gently remove air bubbles from behind decal using a soft cloth. Allow to dry.
How are a person and wax model of that person alike?
a wax person is alike from a real person because a person can breathe
What are the limitations of models?
models may look and act like the real thing but they are not...they do not function the same way as the real one does.models may look and act like the real thing but they are not...they do not function the same way as the real one does.
How do you make working model for English?
There are a few ways to make an English working model. The exact model details depend on the type of English working model you want.
How do you make a traxxas stampede battery waterproof?
It can be, but I would upgrade it with some tape and filling just in the plug to water proof it. If its a brushed motor do NOT run in in mud or water. That just ruins the brushes then it won't work. Nor Brushless don't run it in it rather, or have fun buying another VXL system.
How do you make energy resources and conservation working model?
To make a working model on energy resource and conservation there are several steps. The first step is to make a propane wheel. The second step in this model would be to attach piping to six containers and create a circle with these containers. The bottom of all six containers should be submersed in water. Lastly, fill all of the containers with propane
How to make working model of clock?
its easy buy a clock from a stationery shop. the easiest and the simplest of all.
try it once
What glue is sutable for polystyrene?
There are many polystyrene glues made, especially for model making. I do like a product on sale in hobby stores called RX 7. Given the choice, I use MEK for my model making, but this is dangerous and not sold to the public.
