0
Plumbers
Derived from the Latin word for lead, plumbers deal with pipes and fittings necessary to bring and take away water and waste from homes and buildings. Ask questions here about the training, work, and career path for the plumbing profession.
493 Questions
How much does a self employed plumber make?
The average self employed plumber has an hourly rate of $19 to $45. Several factors can play a role in salary, such as location, and years of experience. For example, plumbers in New Jersey average an hourly rate of $19 to $30.
How many hours does a plumber work in a day?
7hrs Anything over 7 hrs I pay double time to my employees ($90 per hr)
How much does a master plumber earn in Kentucky?
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipelayers, Pipefitters, and Steamfitters as of May 2008 is,$49,200. This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipelayers, Pipefitters, and Steamfitters as of May 2008 is,$49,200. This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipelayers, Pipefitters, and Steamfitters as of May 2008 is,$49,200. This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipelayers, Pipefitters, and Steamfitters as of May 2008 is,$49,200. This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipelayers, Pipefitters, and Steamfitters as of May 2008 is,$49,200. This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipelayers, Pipefitters, and Steamfitters as of May 2008 is,$49,200. This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
How do you become a liscensed plumber?
The following is written by and according to the U.S. Department of Labor and particular to the education and training required for Plumbers, Pipelayers, Pipefitters, and Steamfitters.
Most plumbers, pipelayers, pipefitters, and steamfitters train on the job through jointly administered apprenticeships and in career or technical schools or community colleges.
Education and training. Plumbers, pipelayers, pipefitters, and steamfitters enter into the occupation in a variety of ways. Most plumbers, pipefitters, and steamfitters get their training in jointly administered apprenticeships or in technical schools and community colleges. Pipelayers typically receive their training on the job.
Apprenticeship programs generally provide the most comprehensive training available for these jobs. Such programs are, for the most part, administered jointly by union locals and their affiliated companies or by nonunion contractor organizations. Organizations that sponsor apprenticeships include the United Association of Journeymen and Apprentices of the Plumbing and Pipefitting Industry of the United States and Canada; local employers of either the Mechanical Contractors Association of America or the National Association of Plumbing-Heating-Cooling Contractors; a union associated with a member of the National Fire Sprinkler Association; the Associated Builders and Contractors; the National Association of Plumbing-Heating-Cooling Contractors; the American Fire Sprinkler Association; and the Home Builders Institute of the National Association of Home Builders.
Apprenticeships-both union and nonunion-consist of 4 or 5 years of paid on-the-job training and at least 144 hours of related classroom instruction per year. Classroom subjects include drafting and blueprint reading, mathematics, applied physics and chemistry, safety, and local plumbing codes and regulations. On the job, apprentices first learn basic skills, such as identifying grades and types of pipe, using the tools of the trade, and unloading materials safely. As apprentices gain experience, they learn how to work with various types of pipe and how to install different piping systems and plumbing fixtures. Apprenticeship gives trainees a thorough knowledge of all aspects of the trade. Although most plumbers, pipefitters, and steamfitters are trained through apprenticeships, some still learn their skills informally on the job or by taking classes on their own.
Licensure. Although there are no uniform national licensing requirements, most States and communities require plumbers to be licensed. Licensing requirements vary, but most localities require workers to have 2 to 5 years of experience and to pass an examination that tests their knowledge of the trade and of local plumbing codes before they are permitted to work independently. Several States require a special license to work on gas lines. A few States require pipefitters to be licensed. Licenses usually require a test, experience, or both.
Other qualifications. Applicants for union or nonunion apprentice jobs must be at least 18 years old and in good physical condition. A drug test may be required. Apprenticeship committees may require applicants to have a high school diploma or its equivalent. For jointly administered apprenticeships approved by the U.S. Department of Labor, a high school diploma is mandatory, because these programs can earn credit from community colleges and, in some cases, from 4-year colleges. Armed Forces training in plumbing, pipefitting, and steamfitting is considered very good preparation. In fact, people with this background may be given credit for previous experience when they enroll in a civilian apprenticeship program. High school or postsecondary courses in shop, plumbing, general mathematics, drafting, blueprint reading, computers, and physics also are good preparation.
Certification and advancement. With additional training, some plumbers, pipefitters, and steamfitters become supervisors for mechanical and plumbing contractors. Others, especially plumbers, go into business for themselves, often starting as a self-employed plumber working from home. Some eventually become owners of businesses employing many workers and may spend most of their time as managers rather than as plumbers. Others move into closely related areas such as construction management or building inspection.
For those who would like to advance, it is becoming increasingly important to be able to communicate in both English and Spanish in order to relay instructions and safety precautions to workers with limited understanding of English; Spanish-speaking workers make up a large part of the construction workforce in many areas. Supervisors and contractors need good communication skills to deal with clients and subcontractors.
Hom much an hour does a ua apprentice plumber make the first year?
According to the U.S. Bureau of Labor Statistics the estimated mean annual wage for Plumbers, Pipefitters, and Steamfitters as of May 2008 is, $49,200 This would amount to $23.65 per hour. Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid workers in construction occupations. Median hourly wages of wage and salary plumbers, pipefitters, and steamfitters were $21.94 in May 2008. The middle 50 percent earned between $16.63 and $29.66. The lowest 10 percent earned less than $13.22, and the highest 10 percent earned more than $37.93.
How much does a facilities maintenance technician make?
About 30 to 40K a year also depending on the expierence and not to mention that they took out majority of Bonuses for some Apartment Companies for the workers.
How many hours a day does a plumber work?
Plumbers, pipelayers, pipefitters, and steamfitters often work more than 40 hours per week and can be on call for emergencies nights and weekends. Some pipelayers may need to travel to and from worksites.
How much experience does it take to become a licensed plumber?
Generally About 2 years for journeyman and 2 more after that for master liscense.
How much money does an electrician earn in a year in the UK?
How much money does an electrician earn in a year in Australia
Is there a spec for Applying PTFE tape?
PTFE, polytertafluorethylene polymer, known also under the commercial trademark Teflon is a non sticking plastic, soft material which can be used up to temperatures of about 570 Kelvins. When used in making watertight seals on tubing, just tightly wind it on the threat and what is over the necessary amount will be pushed out during tightening because PTFE is very soft.
Do bricklayers get paid more than plumbers?
I'm a master plumber, and my cousin is a brick layer. I make about 90k a year and he only gets 40k a year. It depends on where you work, who you work for, and also your base wage. I'm a member of Bricklayers and Allied Craftsmen Local 4 Southern California. I lay brick and block, set tile, marble and granite. I am a certified welder. And I have also worked with fire brick. As of 2007 the current "on check" hourly rate for a BAC local 4 journeyman in Los Angeles is $34.07.(With benefits it's about $45/hour) This works out with holidays and other time off to between $65,000 and 70,000 per year for a 40 hour week. With fire brick you quite often work 84 hours in a week ("7 12's"). That's $4054.33 gross in one week. Plumbers usually do not have the opportunity to work that much overtime and on top of all that the current wage for a journeyman plumber is $25.53/ hour*. That's $53102.40 if there were no days off. I may be biased, but you can't argue facts.
How do you receive a plumbers license?
You register at a recognised Technical Institiute and do their course for a number of years,
What property of copper makes it suitable for use in water pipes?
copper/brass may (MAY) leach into the water supply, the body does need trace amounts of the metal, and the almost untraceable amount that IS leached,the body deals with it. it may last for hundreds of years as a supply pipe.
