0
Remote Control Devices
A remote control device is commonly an infrared device used to control electronic devices such as televisions and DVD players. It is usually powered by AA or AAA size batteries.
2,009 Questions
Why cant you change tv stations manually without a remote?
The majority of televisions have some very basic controls on the television itself but they are normally limited to power, volume and channel change. There are often two buttons marked "up" and "down" with a mode button next to them. Pressing the mode button may allow a channel change mode although not all of them have the facility.
Local controls on a television have become less important as the facilities offered by the remote have increased. We expect to be able to operate and set up a television from our armchairs. Manufacturers have responded by improving hand controls and removing controls from the television. It certainly means a more convenient control method but makes the television largely useless if the remote is mislaid.
Until users demand full controls built into the television, manufacturers are very unlikely to increase the controls on the television itself.
What is the 3 digit code for a Journeys Edge Jumbo Universal remote for a Sony Bravia KDL-32L4000?
Journeys Edge Jumbo Universal remote
My brother had that car, it only jumped up about 6-8 inches. I'm also looking for the name of a rc car I got the same year he got that one, but mine would flip over and still drive, looks like the ricochet but not exact. Sorry...
What is the remote code for Curtis LCD3227A for optimum remote?
Im not really sure what the code is but I was able to set up my remote by performing a search.
Following these steps:
1. Press the TV device key and then press Setup until the remote blinks twice
2. Pres 9-9-1 ( the remote should blink twice)
3. Press 1 ( The TV light should blink once)
4. Press the Power Key
5. Press the Ch+ key until the TV turns off.
6. Once the TV turns off press Setup to lock the key in.
I only had to press CH+ 3 times. When I performed the key playback test i got 11100 so you can try that but I would perform the search its alot easier to me.
Where can you get the manual for the digital timer Ledtec model IT-88?
Buy the product in SM malls. It's available in all branches in the Philippines.
How do you reprogram a auto mate car alarm remote?
how or where can i purchase a new auto mate remote contrl for my 2001 toyota sequoia
Where can you get a list of codes for Phillips universal remotes?
You can find a list of codes for Philips universal remotes on the official Philips support website. Additionally, the user manual that came with your remote often contains a section with codes for various devices. If you don’t have the manual, you can also search for it online using your remote's model number. Lastly, some third-party websites and forums provide comprehensive lists of codes for various brands and devices.
How do I hook up a Radio Shack wireless headset with infrared transmitter to my new TV?
The transmitter needs a audio cable run from the trans. input to the TVs audio line out connectors
A diagram for this should be in the packaging.
Remote control codes for black diamond tv?
i have at tv brand diamon and i am buy a control , and i am need the code to turn mmy tv on
Code to use remote model URC20-D1F for Toshiba TV?
018.028.083.165.205.245.270.279.281.370.437.446.455.456.471
codes from book, but cannot get this to work with any tv in the house
How do you open your garage door when the remote will not respond?
There should be an override switch inside the garage.
Is the tv remote finder invented?
yes it actually is invented already and uyou can find them for low prices on pronto.com or buyer.com and etc.
try 04
Will my direct TV remote work with a visco TV?
try 10030, 0r jusrt 0030, it works for me I have comcast cable service and a visco tv set, the code i used was 0030, and it works fine
What is the purpose of the adjustment screw in the craftsman 315 remote?
I couldn't find any documentation to verify this, but it appears to be a frequency adjustment or a signal strength adjustment. My remote wouldn't work unless it was right next to the wire antenna. By trial and error, I was able to adjust the screw (1/8 of a turn at a time) until remote worked from a range of about 50 feet.
Will any codes work for the Dish remote to Control an Emerson TV?
These are the codes we show for our remote programmed to an Emerson TV. I have also provided instructions on how to program the remote to your TV.
Remote codes: 632, 652, 679, 682, 692, 661, 662, 657, 658
Remotes: Basic (Television Only)
- Turn the Television On.
- Press and hold the clear TV button for three seconds until the LED flashes.
- Enter the three-digit code using the buttons on the number pad.
- Press #. Note: The LED will flash three times.
- Test functionality with the TV.
- Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
How do you clone a garage door remote?
the remotes have an embedded serial number
the receiver on the opener has has a button you press to make that remote a part of its friendly list. just push the button on the receiver while pushing the button on the remote
Emerson model lc 320 emxf code for comcast remote?
0154, 0236, 0463, 0180, 0282, 0178,
0179, 0038, 0177 and 0280 are the possible remote codes for Emerson TVs.
What is the JVC receiver RX-8030VBK code for comcast DVR remote?
Found my answer by looking at some other sites.
Some suggested using a 1 before the number (new version of remote).
So I tried 10074 - didn't work.
Another site said that a 3 before the 4 number code worked better.
So I tried 30074 (0074 for JVC in comcast document) and it works great now.
