Small Engines

if 10 to 1 is 1 ltr of oil for every 10 ltr of fuel then math is easy 5 ltr of fuel would get .5 ltr or one half liter of oil.

85 mph

In California, the age limit to drive a golf cart is sixteen. However, it is illegal to drive a golf cart on any actual roads in any state within the United States.

I always say " How much would you pay for it.?" Then there is your answer

A Yamaha Blaster not going into gear is typically a sign of an issue with the clutch. To troubleshoot, try to adjust the clutch at the lever. If this doesn't solve the problem, the shot clutch pack may need to be replaced.

Anywhere from 300-500 lbs.

2%

at least four minutes.

Let go of the "deadman" handle.

At least 4 minutes

they have wings.

Nissan

50 to 1 great little motors hi

The LEM 50cc typically features a Minarelli-based engine, commonly a 50cc two-stroke engine. This lightweight engine is designed for performance and efficiency, making it suitable for youth motocross and off-road riding. It is known for its reliability and ability to deliver a good power-to-weight ratio for small motorcycles.

To remove the top speed restrictor plate from a 50cc scooter, first, locate the restrictor, which is usually found in the variator or the exhaust. You'll need to disassemble the variator by removing the outer casing and then take out the variator weights and the plate itself. If it's in the exhaust, you may need to remove the exhaust pipe to access and remove the restrictor. Always follow proper safety precautions and consult your scooter's manual for specific instructions.

The top speed of the Yamaha Banshee is listed at 74 miles per hour. Motors that are rebuilt in this model can reach top speeds of 90 miles per hour.

1-5-4-3-6-2-7-8

u know when you have greased a bearing when grease starts puffing out. as far as do you ever stop greasing a bearing not as long as the bearing is still in service

A 50cc engine typically weighs between 25 to 50 pounds (11 to 23 kilograms), depending on its design and materials used. Lightweight models, such as those found in small scooters or dirt bikes, may be on the lower end of this range, while more robust engines could weigh more. Factors such as additional components and accessories can also affect the overall weight.

The product called 4X Nickel Babbitt is a lead-free alloy. It is used to resurface bearings made by Babbitt. One package costs around $18 to $20, but some websites offer a discount if you order in large quantities.

Sounds as if you may have either a compression or a timing problem. I would check these two areas first. Also, a new spark sometimes does wonders.

There is not a lot of information to go on from the question as posted. When an engine is in proper operating condition, the spark plugs should not be "wearing out", on a regular basis. From the information at hand, I would suspect the wrong heat range plug is being used. Check to see what spark plug the engine manufacturer recommends for your engine.