0
Suzuki Alto
The Suzuki Alto is a mini car built by Suzuki Motors. The model’s primary selling points are fuel efficiency and low price. It was launched in 1979 and has been manufactured in many countries around the world.
190 Questions
When to change gearbox oil on a suzuki alto 1.0?
The recommended gearbox oil change interval is 36years / 27,000 miles.
You will require 2.2ltrs of 75w-90 oil .
What is the horsepower of a 1976 Ford F-250 pickup?
It depends on the engine size. You need to list that. The common size was the 351M/ 400M engine (listed on the valve cover) these were approximately 200/225 net horsepower. These were carburated engines and I thought they were very sluggish compared to later fuel injected versions.
How do you change the oil on a 1987 suzuki alto?
To change the oil on a Suzuki Alto (87) you need the following items. 1. Shifter Spaner 2. Bucket (For oil when emptied) 3. Cloth (To wipe mess up if any) 4. The new oil Method I found fit: 1. Jack the Alto's front up, you'll find a spot under the bumper. 2. you will find a small shape bolt facing the rear of the car siutated at the lowest point of the motor. 3. Get the bucket in posistion under the bolt, leave room for the parabolic path of the oil once started flowing. 4. When empty, tighten bolt, remove oil container, and lower jack. 5. Fill the oil bay with new refreshed oil. If you need pictures or more assistance, email me at: cm45591@yahoo.com Hope that helped!
How do you remove the starter motor on a 1998 punto?
added by big.paul (30/1/10)
This answer implies that 2 of the 3 bolts are reverse thread but I can confirm that all 3 bolts are normal thread. The left and right relates to direction of the bolt. 1 is accessed from the battery side, the other 2 from the centre.
added by big.paul (21/1/11)
Also be aware there is a group of 5 or so coloured wires that earth (all together) onto the engine block directly underneath the starter. As the starter can be awkward to get out and in when working from above, you can accidentally loosen this earthing, which is probably already corroded. This causes problems in the fuel pump relay and (in my case) non starting (and not due to the starter motor!!). When changing the starter, I would recommend disconnecting this earth strap first, cleaning up with emery cloth etc and reconnecting once the starter is back in place. Makes everything easier and more reliable.
What is the difference between chassis and frame?
A frame is the skeleton of a car without the mountings, were as a chasis is a mounted frame.
What is the Full Form for LXI VXI ZXI engines?
LXI L means base model XI petrol model car/vehicle.
VXI V means full function XI petrol model car/vehicle.
ZXI Z luxurious branded model XI petrol model.
if in the case of XI it is DI ,then the model will be diesel model vehicle.
I think: "i" stands for power steering and power windows.
What is the horsepower of 1989 4.3 vortec?
The 1989 4.3-liter Vortec engine produces approximately 190 horsepower. This V6 engine was commonly used in various General Motors vehicles, including trucks and SUVs, during that era. Its design balanced power and efficiency, making it a popular choice for light-duty applications.
What is the horsepower on a 79 Ford 460?
I have a 1993 f-250 with a 460 in it and the rated HP is 245. I believe that the 460 has been in that area of hp output for many years. Also, My truck has electronic fuel injection - so, if yours is carbuerated then it would be slightly less. According to the specs page in the Chilton's manual, ford pickups w/460 v-8s in '79 were rated at 239 HP@ 4000 rpm and 375 Lb-ft torque @2400 rpm stock. Of course, vans will be slightly less (crummy exhaust), and F350's slightly more (no emissions equipment). - hughes 1701
