Volume

There are approximately 28.3168 liters in 1 cubic foot.

To convert MBH (thousand British thermal units per hour) to GPM (gallons per minute) for a water system, you need to know the specific heat capacity of the fluid in the system. Once you have this information, you can use the formula: Flow rate (GPM) = (MBH x 1,000) / (8.01 x ΔT), where ΔT is the temperature change of the water in degrees Fahrenheit.

1 liter of water fills a volume of 1000 cubic cm and weighs 1kg.

40 x 20 x 30 = 24,000 cubic cm, so it requires 24 liters of water to fill, therefore weighs 24 kg.

Google works well for most conversions. Go to www.google.com and search for the things you want to convert from and to. E.g. in this case search for "40 x 30 x 20 cubic cm in liters", which will give you the number of liters.

A dillilitre is not a measurement unit.

10 decilitres = 1 litre

There are 100 x 100 x 100 = 1000000 cubic centimetres in one cubic metre. Therefore, 16.3 cubic centimetres is equal to 16.3/1000000 = 0.0000163 cubic metres.

1 cc (cubic centimeter) is equal to 1 ml (milliliter). They are both units of volume measurement and are often used interchangeably.

2.2 liters = 0.581 US gallons or 0.484 UK gallons.

Air at 10 celsius and 1 bar(absolute) has density 1.25 kg/m3. By 6 bar do you mean gauge or absolute pressure? To apply a pressure factor you must use absolute, ie the pressure above a vacuum. Normal atmospheric conditions are 1 bar (abs). If you mean 6 bar(abs) the density becomes 6 x 1.25 = 7.5 kg/m3. On the other hand if you mean 6 bar (gauge) this is 7 bar (abs) and the density would be 7 x 1.25 =8.75 kg/m3. Either way, you just divide the weight of air in kg by the density to get the volume.

To find the volume of 2.26M potassium hydroxide solution that contains 8.42g of solute, you can use the formula: moles = mass / molar mass. First, calculate the moles of solute using the given mass and molar mass of potassium hydroxide. Then, use the molarity (2.26M) to find the volume of the solution using the formula: volume = moles / molarity.

1 US teaspoon = 4.92892159 ml

13 tsp = 13 x 4.92892159 ml = 64.076

To convert meters to square meters, you need to square the length measurement in meters. For example, if you have a length of 5 meters, the area in square meters would be 5 meters x 5 meters = 25 square meters.

When you get old enough to go in pubs, you will find many different measures. Most pubs no longer sell an actual 'pint' - many sell a 14 oz glass which they call a pint, and some even serve a 12 oz glass which they call a 'sleeve' and pretend it is a pint. - So really no way to tell how many in a litre any more.

One ounce of milk is approximately 0.2 fluid ounces, which is equivalent to about 0.4 tablespoons or 1.2 teaspoons.

To convert the dimensions to meters, first convert the feet to meters: 113 ft = 34.44 m and 5 ft = 1.52 m. Then convert the depth from inches to meters: 2.5 inches = 0.064 m. Finally, multiply the dimensions to find the volume: 34.44 m x 1.52 m x 0.064 m = 3.32 cubic meters.

The volume of solids is expressed in units3 with the units equal to a unit of linear measure in a given system of measurement. One must chose a system. The volume of a solid is expressed in cubic meters, cubic millimeters, cubic inches, cubic feet or something else according to a selection made by the individual who is recording the data.

There are approximately 0.946 liters in one quart.

The estimate would be just under 8 gallons. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.

You breathe approximatively 0.6 litres (600ml or 1.05585196 pints) in one breath.

1 cup = 8 ounces

1 ounce = 0.12 cup

The same as anything else:

1 US gallon = 3.785 liters

1 Imperial gallon = 4.546 liters

The miles per gallon efficiency rate depends on how much the golf is carrying and what year model it is.

0.16 Imperial teaspoons = 1 cubic centimetre

1 cc is approximately 1/5 of a teaspoon.

One tsp is approximately 5 cc.

A millilitre is a unit of capacity. A centimetre is a unit of length. The two units are therefore incompatible.