0
Windows XP
MS Windows XP operating system that was released for PC computers in 2001
9,737 Questions
How do you change mouse control panel?
To get to your mouse control panel, from a Windows XP system you go to;
Start-->Control Panel-->Printer and other Hardware-->Mouse
Click on mouse and the Mouse Properties box will show up. You can make changes there for the mouse. The speed, the pointer icon and other things.
Name the service that allows files to be copied from an Internet host to a computer?
FTP -File Transfer Protocol...Filezilla is a free program that facilitates FTP.
Why are Windows XP Themes still being made?
Windows XP themes are still being made due to the number of users still on the interface. Consumers with an older package were rolled onto a new XP interface in 2008.
How do you convert mdi to jpg?
Why not try MDI Converter? With the software you can convert mdi or tiff files to pdf, jpg, and so on. See in http://www.mdiconverter.com
How do you get a wired 360 controller to work with a Windows XP laptop?
Plug usb end directly into your usb slot on the pc, download the drivers from Microsoft's site, and then play a game that is either made to use the controller properly, i.e. Assassins Creed or Crysis, or use a joy/key app, like Joy2Key to set up buttons to correspond to keyboard buttons.
/boot directory is where all the file to boot Linux are stored it include the kernel image , initial ram disk. This files are read by the boot loader at the boot time.
What are the main Components of control panel?
some of the main components in the control panel are single phase preventers,contactors-are of two types they are power contactors and control contactors,relays, overload relays,transformers for the equipment and for cooling purpose,etc
Raid 0 :
It is the Stripped Disk Array with no fault tolerance and it requires at least 2 drives to be implemented. Due to no redundancy feature, RAID 0 is considered to be the lowest ranked RAID level. Striped data mapping technique is implemented for high performance at low cost. The I/O performance is also improved as it is loaded across many channels. Regeneration, Rebuilding and functional redundancy are some salient features of RAID 0.
Raid 1:
It is the Mirroring (Shadowing) Array meant to provide high performance. RAID 1 controller is able to perform 2 separate parallel reads or writes per mirrored pair. It also requires at least 2 drives to implement a non-redundant disk array. High level of availability, access and reliability can be achieved by entry-level RAID 1 array. With full redundancy feature available, need of readability is almost negligible. Controller configurations and storage subsystem design is the easiest and simplest amongst all RAID levels.
Raid 2:
It is the combination of Inherently Parallel Mapping and Protection RAID array. It's also known as ECC RAID because each data word bit is written to data disk which is verified for correct data or correct disk error when the RAID disk is read. Due to special disk features required, RAID 2 is not very popular among the corporate data storage masses, despite the extremely high data transference rates.
Raid 3 :
RAID 3 works on the Parallel Transfer with Paritytechnique. The least number of disks required to implement the RAID array is 3 disks. In the RAID 3, data blocks are striped and written on data drives and then the stripe parity is generated, saved and afterwards used to verify the disk reads. Read and write data transfer rate is very high in RAID 3 array and disk failure causes insignificant effects on the overall performance of the RAID.
Raid 4 :
RAID 4 requires a minimum of 3 drives to be implemented. It is composed of independent disks with shared parity to protect the data. Data transaction rate for Read is exceptionally high and highly aggregated. Similarly, the low ratio of parity disks to data disks indicates high efficiency.
Raid 5 :
RAIDS 5 is Independent Distributed parity block of data disks with a minimum requirement of at least 3 drives to be implemented and N-1 array capacity. It helps in reducing the write inherence found in RAID 4. RAID 5 array offers highest data transaction Read rate, medium data transaction Write rate and good cumulative transfer rate.
Raid 6 :
RAIDS 6 is Independent Data Disk array with Independent Distributed parity. It is known to be an extension of RAID level 5 with extra fault tolerance and distributed parity scheme added. RAID 6 is the best available RAID array for mission critical applications and data storage needs, though the controller design is very complex and overheads are extremely high.
Raid 7 :
RAID 7 is the Optimized Asynchrony array for high I/O and data transfer rates and is considered to be the most manageable RAID controller available. The overall write performance is also known to be 50% to 90% better and improved than the single spindle array levels with no extra data transference required for parity handling. RAID 7 is registered as a standard trademark of Storage Computer Corporation.
Raid 10 :
RAID 10 is classified as the futuristic RAID controller with extremely high Reliability and performance embedded in a single RAID controller. The minimum requirement to form a RAID level 10 controller is 4 data disks. The implementation of RAID 10 is based on a striped array of RAID 1 array segments, with almost the same fault tolerance level as RAID 1. RAID 10 controllers and arrays are suitable for uncompromising availability and extremely high throughput required systems and environment
Why do cheerleaders need hardware?
Cheerleaders need hardware, such as pom-poms, uniforms, and safety gear, to enhance their performances and ensure safety. Pom-poms add visual flair and energy to routines, while uniforms create a cohesive team identity. Safety gear, like mats and protective equipment, helps prevent injuries during stunts and tumbles. Overall, the right hardware supports both the aesthetics and safety of cheerleading activities.
How do you remove a syskey from PC?
windows 8: try using passcape
windows 7: 1. Boot from windows 7 install cd.
2. When the Install Windows page appears, click Repair your computer to access system recovery options.
3. Run System Restore to last point before syskey password blocked access. (This will fail, but must be done). Click run system restore again (this will take you back to the options list)
4. Open Command Prompt from the options list.
5. Open Regedit (Type regedit into the command prompt). Regedit will open.
6. Navigate to: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa, and change 'SecureBoot' value to 0.
7. HKEY_LOCAL_MACHINE \SAM\SAM\Domains\Account Change F value to 0000
8. Reboot and Login
How do you make your scroll bar from going up and down while playing a game?
click where the game is then play
Is it possible to open a file from a USB that is not attached?
If your USB is not connected to your device in some way, you cannot open a file that resides on the USB, unless the USB is connected to a networked device and you have access to that network.
Why would Windows XP not shut down and have to be shut down from the power supply?
Typically this is because the drivers did not unload appropriately from some device that was recently installed. I would uninstall the most recent device you put on or in the system, and see if it works. Also ensure that you have all the critical updates!
Answer
Try this, it worked for me. CLICK START-CONTROL PANEL-PERFORMANCE AND MAINTENANCE-POWER OPTIONS. Then click APM- Enable Advanced Power Support Answer Check your power supply whether it is AT or ATX.
Is it possible to connect to another computer in remote desktop through dial up?
First Reply:<I take it you don't have a router. If you bought one you could run your dial up through an into that then run other PC's off it. Or just get broadband its not even that expensive these days.>
Second Reply: <I do have a router andI do have broadband. But I also have built in bluetooth on my computer. I use it to connect to the internet through dial up on my cell phone. The reason I asked this is because I wanted to access my desktop from anywhere. And yes, I have the port forwarding set up through my router. It works when I connect through Broadband.>
yes
D - Graphical User Interface !
Can you install Windows 7 from the iso file?
1)first download the windows USB/DVD download tool.
2)then go and download the windows 7 enterprise (90 day trial)
3)once you have downloaded both of these items open up the USB download tool and input the ISO file(windows 7 enterprise).
4)then burn the files on to a 4.7 GB disc.
5)then once it has finished take out the CD and put it pack in and you just need to follow the steps on your computer and your done
:)
Is it possible to get iPhoto for WIndows?
It is not possible to get iPhoto for Windows. iPhoto is only available for Mac. Windows does have several alternatives to iPhoto like Windows Live Photo Gallary and Picasa.
How do you get loads of xp on toonix?
play lots of games and send messages to your friends
or, sell lots of stuff :D
