answersLogoWhite
Auto Parts and Repairs
Electric Windows

How do you replace the drivers side power window motor on a 1997 Pontiac Trans am?

858687

Top Answer
User Avatar
Wiki User
2015-07-15 20:51:43
2015-07-15 20:51:43

I found this while looking for info on a Grand Prix. It should help you.

http://shbox.com/1/how_tos.html

When buying a new window motor, buy it with the regulator. Trust me, the extra money is worth it in the long run. It's such a pain if you change the motor on the regulator. But if you cannot afford the whole assembly, make sure you drill a whole threw the fixed regulator arm, and geared regulator arm, and run a bolt or a pin threw the holes to keep the two arms aligned. This trick will save your fingers from the spring, and save you a lot of time and effort. But again, save yourself a lot more time and trouble, just buy the motor/regulator assembly.

1

Related Questions

User Avatar

how to take a evaorator out of a 1997 pontiac trans am

User Avatar

Look on the drivers door for that info.

User Avatar

You can find a power window wiring diagram for your 1977 through 1979 Pontiac Trans Am in Pontiac service manuals. The service manuals can be found at most local libraries.

User Avatar

Remove the bolts, remove offending fan and replace with new one

User Avatar

The 1989 Pontiac trans am is a classic automobile. Yes, you can flat tow a 1989 Pontiac Trans Am.

User Avatar

Pontiac Trans Sport was created in 1990.

User Avatar

It is located on the drivers side by the back tire,near the drive shaft.

User Avatar

Not very likely, as there is no such thing as a 2005 Pontiac Trans Am.

User Avatar

If your 1994 Pontiac Trans Am randomly stalls out while driving, you may have clogged fuel injectors or a bad distributor. Check the distributor first, as this is the easiest to replace.

User Avatar

Under the left kick panel on the drivers side of the car.

User Avatar

The Trans-am is no longer made. Pontiac stopped production in 2010.

User Avatar

I think there is no 96 Trans Am. The Trans Sport module is on the rear center of the engine. Remove and replace it with standard US or metric tools. There are three electrical plugs to remove from socket. The Trans am didnt die till 2002 there was one in 96.

User Avatar

The fuel pump relay for trans am 88,89, is located on the firewall under hood on drivers side it is square about middle of three.

User Avatar

1969 was the first year for the Trans Am.

User Avatar

A Trans Am is a package on a Firebird.

User Avatar

Replace the check valve on the secondary air injection system on the passenger side

User Avatar

disconect battery replace item that the SES is telling u to replace use an OBDII tool and reset that way

User Avatar

Any library has the books.Go online if you are registered and look under online research and automotive.

User Avatar

If you can find any they'll be the only ones in existence, as there won't be a 2011 Trans Am (or even Pontiac, for that matter)

User Avatar

Answer Anonymously What is the diagram and firing order for a 76 Pontiac trans am 455 engine?

User Avatar

All 1993 Pontiac Trans Ams were made with the LT1 engine.

User Avatar

It's usually a good rule of thumb that if you replace the trans, you replace the clutch.

User Avatar

A 1997 Pontiac Trans Am has 285hp and 325ft-lb torque.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.