answersLogoWhite

0

🏢

Construction

Construction is an industry which builds structures.

1,073 Questions

Who is a contractor?

What is a Contractor?Depending on the type of contractors'

A "contractor" is any person engaged in the business of construction, repair, alteration, dismantling, or demolition of bridges, highways, roads, streets, buildings, airports, dams, pipelines, and every other type of structure, project, development, or improvement coming within the definition of real or personal property, including the construction, alteration, or repair of property to be held either for sale or rental, and shall include subcontractor, public contractor, and nonresident contractor.

No person may engage in the business nor act in the capacity of a contractor within this state when the cost, value, or price per job exceeds the sum of two thousand dollars without first having a license.

(http://www.nd.gov/sos/licensing/what-is.html)

A Contractor can also have other meanings;

Some other meanings include:

- Mercenary work that is commissioned on per basis mission contract.

- Entrepeneurs who undertake private enterprise projects, commissioned on per piece contract.

- Political representatives who's main political ideologies consists of contracting (reduction of) financial spending as a governmental agenda.

What is the life span of a pine?

It really depends on the kind of pine tree. The Ponderosa Pine is one of America's most abundant tree species, covering approximately 27 million acres in the western United States. The trees average 100 -160 feet in height, and range from 2 - 4 feet in diameter. Their average life span is about 125 years, but some of the larger trees may be 300 years old.

How do you sack wash bricks to make them look older?

Sack wash is a hold over or long ago, but essentially refers to whitewashing. Whitewashing ages the brick and is a flexible, inexpensive update.

Who owns makita tools?

Most Makita power tools currently sold in North America are manufactured in Japan or China. Here are a few exceptions to this rule:

  • 3" x 18" belt sander - made in England
  • chain saws - made in Germany

Makita's blue-and-black cordless tools and some corded tools (e.g., AVT hammer drills, the 3 amp multi-tool, and the venerable 3" x 24" belt sander) are still made in Japan.

A few of Makita's corded (e.g., some 10" and 12" sliding compound mitre saws, and the 3-1/4" planer ) and cordless tools (e.g., 9.6V tile saw) are assembled in the USA.

Makita's 5007FA 7-1/4" circular saw, 9005BZ 5" angle grinder, and 6013BR 1/2" corded drill are currently assembled in Canada.

How are stucco houses made?

Portland cement, hydrated lime,sand. This is real stucco. The best. There is a synthetic

stucco but there is a lot of moister problems using it, because it can't breath.

What are the types of supporting construction for drywall construction?

There is conventional drywall, also known as gyprock, wallboard, plasterboard, sheetrock and possibly other names. This is all Hydrated calcium sulfate.

The new light drywall is made with ash added as part of it, and weighs about 32 pound per standard sheet compared to 54 for old style.

Drywall sheets are the commonest wall cladding in the world and sheets are made in over 100 varieties and sizes.

What is Knock-off finish in building construction?

Knock-off finish in building construction is a building which construction works has been completed, and ready to be handed over for habitation.

How much would it cost to add an attached garage?

Well it depends on how big you want it to be. Normal garage size would be about $8-10

grand.

What is the colour of pig iron?

the team colors for the iron pigs are sliver, red, and blue

Does PVC pipe float on water?

Yes, it does. People have made rafts from it.

What is the use of cantilevers in construction?

: I would consider the most common use for cantilever beams to be in building construction.....and probably the most obvious example is in mediaeval buildings with a framework of oak beams . Everyone must have seen these old buildings where the upper stories are wider than the ground floor , very common in Europe . The ceiling beams for the ground floor (also the floor beams for the upstairs rooms)are arranged to project out through the walls by 10-18 inches (30-45cm) , and the wall structure for the upper stories is built apon the projecting ends . This allows a larger open space to be achieved in the ground floor rooms without annoying support pillars because the weight is partly offset by the weight of the upper stories acting as a counter balance . This technique has been described as a way to avoid the tax on the building 'footprint', but this is not true in all countries where it was adopted , the tax merely prompted a wider acceptance of the technique . The same building tricks are used on modern buildings and bridges , but are not always obvious or visible when the structure is completed .

Why is 110v used on a construction site?

For personal safety reasons. In the UK the line voltage is 230 volts and this voltage can be lethal in a wet construction site. The step down transformer used has a centre tapped secondary winding of 55v+ 55v make 110 volts.The centre tap is earthed to the power tool etc, thus making the maximum potential for electric shock at 55 volts:-sub lethal. <><><> Supplies of 110 volts are recommended for use on construction sites for personal safety reasons, on the basis that, if any wiring or equipment casings become "hot" or "live", the danger of electrocution is greatly reduced compared to the certain dangers that would exist if supplies at higher voltages, such as 230 volts ac, were used. In countries running a 50 Hz power supply service, 230 volts ac is the common voltage supplied for use for normal lighting, appliances and small electrical tools and equipment - except on construction sites, where the use of equipment running on 110 volts is now mandatory to meet the requirements of Health & Safety laws.

How can you select PVC pipe?

Sizing of pipes differ for media to be tranported eg. for air,water ,gas and solids.

Basically how much pressure and volume will be handled by using minimum energy

required to convey.

What is the abbreviation for 'construction?

The word construction is generally abbreviated as "const". However, it could be written in a slightly longer shorthand as "constn".

Top 10 construction company in the Philippines?

1. Ayala Land Inc.

2. Jollibee Foods Corp.

3. Ayala Corp.

4. Globe Telecom

5. San Miguel Corp.

6. Bank of the Philippine Islands

7. ABS-CBN Broadcasting Corp.

8. Philippine Long Distance Telephone Co.

9. SM Prime Holdings

10. Banco de Oro Unibank.

What does icm means with regards to construction type?

ICM Construction is a team of professional advocates who help businesses with financial investments. This company is located in Illinois and was established in 2008.

What is s Site layout in construction field?

www.cherrybam.com

that has some good myspace layouts.

also www.dolliecrave.com

hope i helped:)

What are Blue top stakes vs red top?

In construction grade staking: blue tops (2x2x6 to 12 inch stakes) mark the level of finish grade; red tops (2x2x6 to 12 inch stakes) mark the level of sub-grade; the color comes from lumber crayons used by the surveyor to ID the stakes by colorizing stake tops;

Can you use PVC pipe outside?

Yes, PVC pipe can be used outside, but it's important to consider UV exposure. Standard PVC can become brittle and degrade when exposed to sunlight over time. For outdoor applications, it's advisable to use UV-resistant PVC or protect the pipe with paint or insulation. Additionally, ensure the pipe is suitable for the specific outdoor application, such as drainage or irrigation.

What is the starting salary for a construction Superintendent or construction manager?

In the United States of America the average construction manager earns roughly 82 thousand dollars a year. This was as of the year 2012.

Why concrete roads are laid in section with pitch between them?

Concrete, whether in a road or a building expands (gets longer) in hot weather and contracts (gets shorter) in cold weather.

So the builders install an expansion strip every so many feet to allow the concrete to make these small but significant changes in length. If this were not done, the concrete, when warm, would expand, and having nowhere to go, would go up (roads) or out (buildings), thus ruining the road or building.

These expansion joints are filled with pitch, tar, or mastic - they call it different things in different parts of the country - to keep out water. Water would freeze, and cause the same problems.

How many wheel barrows is 1 yard?

For sand it would take between 9 and 14 full loads to equal 1 cubic yard. The average wheelbarrow size is 2.5 cubic feet per load. For other types of materials the result would be different.

How do you find best roofing companies?

When you have decided to repair your roof you need to choose quality roofing company. To select a quality roofing company, you should follow some basic steps:

1. Experience of the roofing company.

2. Working portfolio of the company.

3. Material used by the roofing company.

4. Licensed or not.

5. Insured or not.

To get a clear idea you can visit following roofing companies website: jbcroofers.com, roofingcontractor.com, premier-roofing.com