Technology

I Belive that in 1948, the only computer was ENIAC, and it belonged to the US Government. it ran off of vaccume tubes and had an average up-time of 30 minutes at the best. it ran slowly, was difficult to use, and often broke. It sat in a Air-Conditiond room and was top secret.

enterprise computing is a selling of goods and product via internet

No, the only way to do that is to use the internet browser to view copyright infringing videos on YouTube or to do unauthorized modifications to your DSi that will probably void your warranty.

By 2000, most people had a computer with the internet, something which would have been rare ten years earlier. Many people owned cell phones, but they were just phones back then, i.e. you couldn't use them as cameras, check your e-mail on them, or anything of that sort. DVDs existed, but hadn't caught on yet and most people owned movies only on VHS tapes.

Right click on your windows taskbar, go to properties, under the taskbar properties you will get the taskbar appearance pane in which you check the Auto hide the taskbar option and your taskbar will get disappear.... whenever you need it just hover you mouse to the bottom of your desktop it will reappear....

Nothing.

Or, if done in public, you could be picked up by some very nice gentlemen in white coats, who will give you a very special jacket called a "straitjacket" and a nice room with cushions on the floor and walls.

yes because cell regurgitates 18 and cell doesn't go back to his first form

1: It can cause the computer to not have power, at all, so that when you press power, absolutely nothing happens.

2: If it's surge protecting feature is down, it could let a surge through and damage components.

Depends on which iPhone you buy. iPhone 5s comes with 16 or 32GB of storage.

iPhone 6 & 6 Plus comes with 16 or 64GB of storage

iPhone 6s & 6s Plus comes with 16GB, 64GB, or 128GB of storage.

My laptop is capable to play mid-end games like Sims 3. As I have a laptop, I only can upgrade the RAM which 4gb is plenty for me.

If I had a desktop, I would firstly see what motherboard I have got because I will need to a buy a graphics card which is compatible. Also, upgrade processor and RAM.

People uses technology everyday. For food, energy, supplys for survival, homes, and life. So without it, we cant survive. That's why we create computers, stoves, and phones, to make life easier. For example, if you want to tell something to someone that is across the globe, and you dont have a phone, would you sail across the ocean just to tell that person?

If you are looking for an unlocked phone, most people purchase them from stores like Best Buy. However, if you have a phone like the older model IPhone's, there are websites that you can access to unlock it. (Legality may be an issue)

There was a massive impact on the human population after the Information era. People became much more aware of their surroundings and actions for example.
Software has become the key element in the evolution of computer based system and products. Over the past 60 years, software has evolved from a specialized problem solving and information analysis tool to an industry in itself. But early programming culture and history have created a set of problem that persist even today. Software has become the limiting factor in the continuing evolution of computer based systems. Software is composed of programs, data, and documents. Each of these items comprises a configuration that is created as part of the software engineering process. The intension of software engineering is to provide a framework for building software with higher quality.

Online IT Guru provides the best PEGA training

PEGA CPBA Training | Pega Business Architect Training Pega is a leading cloud software platform that mainly focuses on customer engagement and operational excellence. It is under the Pega-systems Inc. that develops platforms for CRM, BPM, and digital process automation for enterprises. Pega Platform is developed to provide best-in-class, easy, and quickly build applications. Moreover, deploying the Pega Platform on Amazon AWS gives the benefit of the flexibility of the Pega Platform Cloud option.

9000/6 = 1500 seconds, or about 25 minutes (it would be more like half an hour, given the way speeds jump around).

I agree with Nij, but I believe most networks are listed as mega bits per second (Mbps), not megabytes (MBps). If this is true in your case, multiply the 1500 by 8, to get 3 hours and 20 minutes. This is assuming you download at maximum speed of 6Mbps, which I doubt. I'd expect a minimum of this time, and wouldn't be suprised if it takes much longer.

Can't Log On to Windows XP?

If that's your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access hole in Windows XP.

This method is easy enough for newbies to follow it doesnt require using the Recovery Console or any complicated commands. And its free - I mention that because you can pay two hundred dollars for an emergency download of Winternals ERD with Locksmith which is a utility for unlocking lost Windows passwords.

ERD is an excellent multi purpose product, but you should know it is not a necessary one if you have a healthy system and your sole problem is the inability to logon to Windows due to a forgotten password. Not necessary because you can easily change or wipe out your Administrator password for free during a Windows XP Repair. Heres how with a step-by-step description of the initial Repair process included for newbies.

1. Place your Windows XP CD in your CD-ROM and start your computer (its assumed here that your XP CD is bootable as it should be - and that you have your bios set to boot from CD)

2. Keep your eye on the screen messages for booting to your CD Typically, it will be Press any key to boot from CD

3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now

5. The Licensing Agreement comes next - Press F8 to accept it.

6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like If one of the following Windows XP installations is damaged, Setup can try to repair it

Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.

7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically you will see a progress bar stating Your computer will reboot in 15 seconds

9. During the reboot, do not make the mistake of pressing any key to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.

10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.

11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.

12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you've made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).

13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem.

And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password.

Cancelling will just result in Setup resuming at bootup and your changes will be lost.

Ok, now that your logon problem is fixed, you should make a point to prevent it from ever happening again by creating a Password Reset Disk. This is a floppy disk you can use in the event you ever forget your log on password. It allows you to set a new password.

Here's how to create one if your computer is NOT on a domain:

* Go to the Control Panel and open up User Accounts.

* Choose your account (under Pick An Account to Change) and under Related Tasks, click "Prevent a forgotten password".

* This will initiate a wizard.

* Click Next and then insert a blank formatted floppy disk into your A: drive.

* Click Next and enter your logon password in the password box.

* Click Next to begin the creation of your Password disk.

* Once completed, label and save the disk to a safe place

How to Log on to your PC Using Your Password Reset Disk

Start your computer and at the logon screen, click your user name and leave the password box blank or just type in anything. This will bring up a Logon Failure box and you will then see the option to use your Password Reset disk to create a new password. Click it which will initiate the Password Reset wizard. Insert your password reset disk into your floppy drive and follow the wizard which will let you choose a new password to use for your account.

Note: If your computer is part of a domain, the procedure for creating a password disk is different.

Exhaust fan , commonly located on the right side of the machine, is a special fan that sucks in all the exhaust the machine is using, it should also be able to suck in little scraps of paper, powder of wood, and sometimes tiny scraps of plastics.

4 fluid ounces (UK) are equal to 113.6521 ml

4 fluid ounces (US) are equal to 118.2941 ml

no one really knows when a tracfone will have a keyboards but they would get more sales if they did

1GB is equal to 1024MB so 4.7GB will be equal to 4.7*1024 = 4812.8MB

IBMs EGA Standard supported a choice of 16 simultanous colors out of 64 possible colors.

A Ballpoint pen has a round ball at the tip, which is used to control the flow of ink onto the page. Almost all modern pens are ballpoint, ballpoint pens are a relatively recent invention.

The only common alternative to a Ballpoint pen is a Fountain pen.

A Fountain pen is identifiable by the shape of its "nib", which is commonly a flat piece of metal with a channel down the middle which controls the flow of ink onto the page.

Broadly speaking, the most common ballpoint pen you will find is a disposable type, with a thin tube of ink which will be visible from the outside if the casing is clear.

Disposable pens are commonly marked with a coloured cap to indicate the colour of the ink inside.

When writing with a ballpoint pen, it is usually neccessary to press the tip onto the page, or the ink will not come out in a regular fashion. As a consequence when writing on soft paper, in a pad for example there is usually a visible mark left on the pages below. This can be an advantage, as a layer of Carbon paper can be put behind the top page, and the carbon will be left on the page below, leading to "carbon copies".

It is not normally practical to use a fountain pen with carbon copies, as by contrast, a fountain pen does not need a lot of pressure in order to write.

Hence when the same person is writing they will normally have two distinct styles from which type of pen they use.

There are some more expensive types of ballpoint which allow you to keep the pen and replace the ink supply, but Fountain pens are usually designed with a replaceable supply of ink in mind.

Most modern types of fountain pen use an internal cartridge to store the reservoir of ink, although historically earlier fountain pens were supplied with ink by dipping the tip into a jar of ink, and some later types were designed to allow the ink to be "sucked up" through the nib into an internal reservoir.

I hope this helps!

i don't know

through the way of writing

Yes. It is a way of distinguishing the different parts of the document.