0
Cable Television
A cable television is a system that distributes television signals by means of fiber-optic or coaxial cables. Cable television systems started in the United States in the late 1940s to enhance reception in hilly and remote areas, where broadcast signals were weak.
3,389 Questions
What is Emerson universal remote code for a coby tv?
Try these TV remote codes: 526, 534, 536, 541, 573, 590, 627, 636, 642, 648, 652, 654, 655, 657, 658, 659, 660, 661, 662, 665, 666, 667, 669, 670, 677, 679, 682, 692, 696, 699, 720.
Where can you find codes for a pdi tv using a Philips universal remote?
You can find Philip universal remote codes either on the Philips site or the site for the universal remote. Also some cable/satalite providers carry remote codes for the different devices.
What are the codes for a Philips universal remote CL035A?
Although the sticker in the battery compartment says CL035A, the model of the remote is actually a SRU3007. It's a big button remote. Here are the links:
Complete Owner's Manual, including instructions for programming the remote, and a list of all of the codes:
Navigation Instructions for the Wary:If you are skeptical about clicking through to links found on WikiAnswers (I know I was), you can simply visit:
www.urc.Philips.com (The Universal Remote Control sub-page)Under the large number 1 in the left menu, Click on United States URC ModelsWait for page to refresh, then choose "My remote control starts with SRU"Choose SRU 3007
A link to the product manual will show up. There is also a link to the remote codes, only, but you would still need to know how to program the remote in order to actually INPUT these codes. The codes list does not have instructions for inputting the codes, so here they are:
DIRECT CODE ENTRY METHOD:Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.
CODE SEARCH METHOD:Manually turn on the device (TV, VCR, etc.) to be controlled.Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.Press and quickly release the desired mode button (TV, VCR, etc.). The red indicator blinks off once.Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction to forward again.Press and release MUTE to install the code.
The sticker reads wrong... that I agree. But the actual model is not US2-PH63S it is SRU3005.
Although the sticker inside the battery compartment reads "CL035A," the model is actually US2-PH63S on the Philips website. There is nothing printed on the outside of the remote other than "Philips UNIVERSAL." On the original packaging, you may only see "PH63S," which will frustrate any attempts to navigate the Philips website for the corresponding codes or support documents. Note to Philips: please include the model number on the outside of your remotes, and verify that it corresponds to the help documentation on your corporate website.
Use the online code lookup tool. In most cases, you will have several codes to try. You will need to try programming them one at a time in order to determine which one works best.
In order to program the remote, press the Code Search button until the LED lights solid red. Then press the button corresponding to the device type (TV, DVD, etc.). Input the four digit code for your device. The red light will turn off when a valid code is entered. (If the light remains on, you have mistyped the code and you need to start over.) Test to see if the channel or other buttons work for the device.
Write down the codes and tape them to your remote because they will need to be programmed every time the batteries are changed or someone accidentally presses the Code Search button!
Actually it's a SRU3007/27 big button remote control .Why they had to give it two different names I don't know ??
Actually that information is wrong. The CLO35A is the US2-PH63S. The unit listed above is a little more user friendly and probably cost a few dollars more. The CLO35S does not have all the buttons and the color scheme is different. Granted, all the programming features for the SRU3007/27 will probably work on the US2-PH63S (not confirmed, educated guess).
http://www.p4c.Philips.com/files/s/sru3005_27/sru3005_27_dfu_aen.pdf
Is Blu-ray Disk is optical disk?
Yes, a Blu-Ray device is an optical reader.
CD's, DVD's, and Blu-Rays are called Optical Devices because the reader looks at the disks using light. The light is a laser.
Just like a DVD, a Blu-Ray uses a laser beam to light up and read the information on the disk. This is like an old record needle running along a record groove and reading the information. However, the laser used by CD's, DVD's and Blu-Rays does not touch the disk. It just lights it up.
The difference between DVD's and Blu-Rays is the colour of laser. DVD's use a red laser light, Blu-Rays use one that is blue. Different coloured laser beams read different sizes. Writing and reading on a DVD with a red laser beam is like using a crayon, a blue beam is like a sharp pencil. The Blu-Ray is an optical device, just like a DVD, but because it uses a "finer pencil" it can put more information onto the disk.
What channel is cltv on AT and T?
CLTV is typically found on channel 8 for AT&T U-verse subscribers. However, channel numbers can vary by location, so it's advisable to check your local channel lineup or the AT&T U-verse website for the most accurate information.
Will rabbit ears pick up cable tv stations?
They will not work anymore. The law was passed last year that all channels with be delivered through digital cable only. You can go to your local cable company and they will supply you with a cable box if you want to receive the few free channels. I don believe there is a price to purchase the cable boxes though.
What are the codes from a Zenith Universal remote to a Mitsubishi television?
What are the codes to program a zenith mbr3455 universal remote for a zenith DVD player
How do you program an RCA rcr 615 universal remote?
We tried and tried to do it by the instructions that came with the remote, but we just couldn't get it programmed.
Then, on the web, we read instructions from a user which allowed us to program it, and it was much easier.
Start with the appliance (TV, VCR) off and turn on.
1. Press the appliance button (TV, VCR) and the ON/OFF button, holding them down until the ON/OFF button lights up. Release the buttons and the ON/OFF button should stay lit.
2. Then press the play button every couple of seconds until the appliance turns off.
3. Then press the REVERSE button every couple of seconds until the appliance turns on.
4. Then press STOP (on the bottom) to save the programming.
5. UREKA!
****THIS IS THE EASIEST AND BEST TIMESAVER!! Thank you!!
Who manufactures Philips tv's?
The company's name is NAP, or North American Philips. Well, at least that's the American version of it. Of course there's no longer any televisions made in America, and they are imported from manufacturers around the world.
What channel jetix is on cable vision?
Jetix no longer exists on any TV provider. It was re-branded to Disney XD as of 2009. You can find that channel on Ch. 174 on DISH!
How do you setup a universal remote?
Basically you need to push the power button followed bt the device you are operating ie tv then input the first code then the leds should blink twice then push power button again if tv turns on or off depending which the set was on when you started (it should do the opposite if on at the start should turn off etc ) if it does push the ok or memory button that locks in that code if the correct one at first go should operate the set in every way if it doesnt then start again and move on to the next code you may find along the way the codes will turn it on and off but not all functions its basically hit and miss sometimes its the last code that works lifes like that sometimes if no joy with any contact the manufacturers and ask for the search code this runs through all possible codes and finds the exact one hope this helps
Does Charter Communications broadcast in 720P or 1080P?
No, only 1080i. 1080p is currently only found on local video sources such as games consoles and computer displays. Broadcasters are currently using only 1080i and 720p as their HD formats.
How do you find wavelength of a wave?
The speed of a wave equals the frequency times the wavelength (speed = frequency x wavelength). Therefore, the wavelength would equal the speed divided by the frequency. Also, the speed of a wave in a vacuum is the speed of light, c, which is a constant.
What is the difference between Foxtel IQ and Foxtel IQ2?
The difference is only that Foxtel IQ2 has more features than any other set top box and can watch in HD (High Definition) and has double space for recording than Foxtel IQ with a massive space of 320GB.
What are some Comcast deals available on the Comcast website?
Comcast has several different special deals going on right now. The first one is X-Finity TV plus internet for $69.99 a month for 12 months. The next is XFinity TV with On-Demand and Showtime for $29.99 for 12 months. Another great deal is XFinity Internet or $29.99 a month for 6 months. They also offer XFinity Voice which is unlimited calling and 12 special features for $19.99 a month for 6 months. All of these offers are for new customers only.
How do you switch inputs on the dynex tv without the remote?
To change Input on the Dynex television without the remote, a person can use the channel selector buttons. Change the channel manually to the lowest possible number, then go lower until the right Input is reached.
How do i Record on VCR with no cable box?
Hi,
On a VCR without a tuner, you'll need to use the video and audio input jacks either from the cable?satellite box or your TV if they're available. Remember, the yellow jack is for video and the red is for the right audio, the white is for the left channel audio.
Hope this helps,
Cubby
