answersLogoWhite

0

Computer Mouse

A mouse is a hand-operated input device used in a computer. It is used to tell a computer what to do, including moving the pointer, and selecting items on the screen.

1,145 Questions

What is the importance of clicking the mouse of a computer?

You need a mouse to control your computer. You can also use the keyboard only but it takes longer. Your computer needs a mouse. And it makes your life better with it.

How do you open logtech wireless mouse to change the battery?

It depends on what model you have. Some open from the top some the bottom!

What should you do if your mouse scroll has a lot of friction rolling down but less rolling up?

This can be caused by a blockage in the mouse or a software error.


Software:

Go to the Control Panel, then 'Hardware & Sound", click 'Mouse', then select the 'Wheel' tab.


Here you can adjust the sensitivity of the mouse scroll in both directions. Most mice have the default speed of 3 for both upwards and downwards scrolling.


Try adjusting the sensitivity here and seeing if it makes a difference.




Blockage:
Computer mice can easily be clogged with dust, skin, sweat and hairs.

When you hold a mouse, the sweat produced from your hand seeps into the mouse via the wheel or any other openings in the mouse. The sweat dries and becomes sticky allowing dust particles and skin cells to stick to it. This causes blockages in the mouse, affecting its performance.


You could try unplugging the mouse then inserting a paperclip, pin or thin metal wire into the holes around the mouse wheel to try and loosen any blockages.


If this doesn't work, most mice are easily taken apart and inspected. There may be one, two or three screws underneath your mouse. Unscrew them, then carefullydissemblethe mouse, being careful as to not stretch any wires or componentsinside, then clean out any dirt inside and re-assemble the mouse.



Mice can also be affected by overuse. So, if you have an ancient mouse, the chances are that the wheel components have worn down.



Neither:

If all fails, it's time to buy a new mouse. Mice are relatively cheap from any PC store, unless youpurposefully(unnecessarily) want to buy an expensive one.

If you have recently bought the mouse, return it to the store as a faulty item.


Personally I would suggest that you avoid buying a mouse made by Microsoft. Microsoft use very cheap and tacky componentsin their mice and use low-paid labour in Asia to assemble them. Microsoft mice may look nice but their performance and life is extremely poor.



What are advantages and disadvantages of mouse?

Advantages:

  • Small enough to not be noticed around the house and fit in small holes.
  • Big sharp teeth to chop through hard things e.g. Wood, rope.
  • Tiny amounts of food could fill it up.

Disadvantages:

  • However,... small enough to be trampled on.
  • Big parts of it's body i.e. Ears, Tail. Flap about allot.
  • Because, mice live in walls, deadly materials like aespestos (and others) could kill them.

What is T5500?

It is a Processor made for laptops. Intel Core 2 Duo T5500.

Can you have a wireless mouse and roller-ball connected to the same computer?

As long as you have enough ports on the computer yes you can. Unfortunately it will not give you more than one cursor. This can get a little messy at times if multiple people have the mice are are both intent on doing something different than the other person.

Who sells dell in the 44130 area code?

You can order one online at Dell's website and they will deliver it to your address.

However if you wish to visit a store, I believe there is a Wal-Mart near your area.

Full form of monitor?

Monitor IS the full form. It isn't an abbreviation nor an acronym.

Does axife mouse recorder work with the screen off?

No, just dim the brightness if you're trying to sleep while it runs.

Can you replace a ball mouse with an infrared mouse?

Technically, yes. I doesn't matter whether it's a ball or an infrared mouse, I'm pretty sure they hook up to the computer the same way, and they both work rather similarly, but I really like infrared mouses better.

Diagram of internal working of mechanical mouse?

You can find some of these diagrams online. There will be many available through a simple Internet image search to help you out.

What are the 7 input devices of computer?

keyboard, scanner, mouse, speaker, light pen, touch screen and trackball.

Is the measurement for the speed of a mouse called a mickey?

Only the rough measurement, the fine measure is the Minnie

Working principle of mouse?

> With most of the system you will find mechanical mouse.The primary mechanical part of a mouse is a ball on the bottom of the mouse. There are these little wheels which turn/rotate when the ball moves against them. The wheels are monitored electronically. When they trun or rotate they transmit how much they have turned to the computer. Out of these three wheels the two wheels perpendicular to each other are used for tracking the motion on X-axis and Y-axis. The third one just balances the two.

When the mouse is moved on a flat surface the roller ball moves in the locking ring. When the mouse is positioned on the desktop the actuators register the mouse balls movement in X-axis and Y-axis direction. The sensors attached to it generate a series of pulses representing movement on both axis. The pulse generated are in same ratio as the mouse movement i.e. More pulse mean more movement.

Normally a mouse is used along with a mouse pad. Place the mouse pad on a flat surface and place the mouse on it. Move the mouse pad and the pointer moves in the direction of the movement of mouse.

--Various terms related to the use of mouse are :-

> Click

> Double click

> Drag

1. When the left button of mouse is pressed and released quickly then this we can say ' clicking the mouse '.

2. The double clicking is used to initiate some action on the selected item. Basically it selects and initiases the action. For this the enter key is pressed and relieased sticky twice.

3. If AN object is to be moved from one part of screen to other part then dragging is used.

For this bring the pointer to the required object , press the key and hold it while moving to other place. When the mouse pointer reaches at required position , release the button.

I think that the all the given work is hands of mouse

Trackball is basically a mouse turned which way in a mouse?

A trackball is basically a computer mouse that has been turned upside down. This allows the mouse to sit in a stationary position, requiring less desk space.

How do you unfrezze mouse on computer?

  • Check underneath it to see if it is ON.
  • Check if the USB connector is in the plug well.
  • It might be the computer, not the mouse
  • Contact Logitech if none works.
  • Hope it helps! I'm using a Logitech mouse right now! :) ( A cool red one)

How many muscles do you use to click a mouse?

Clicking a mouse uses some of the smallest muscles in your body, the extensor muscles in the fingers. Many of them work together to achieve a click.

Give 7 example of input device and explain each input device?

1. Keyboard - type letters, numbers, etc.

2. Mouse - click on buttons, text boxes, etc.

3. Touchpad (for laptops) - same as a mouse

4. Touchscreen - just touch the screen where you want to click

5. Pen (I think...) - just put the pen on the screen where you want to click

6. Scanner - scan for real images, documents, etc. and save them on your computer

7. Modem (I think...) - surf The Internet

8. Microphone - record sound and voice

9. CD-ROM/DVD-ROM/BlueRay/Floopy Disk/USB Drive/etc - get data from that drive

Hope there are enough ;)

Does apple wirless mouse have right clik?

The Mighty Mouse and Magic Mouse both support right click.

What does it mean when the mouse pointer appears as an hourglass?

means you computer is doing somthing, normally trying to load something. would be a good idea to do a virus and spyware check to ensure its ok