Computer Networking

Ip address is 10.0.1.0

Gateway is 10.0.1.254

if not Try this update 01/30/2014

IP Address: 10.0.1.28

Subnet Mask: 255.255.255.0

Default Gateway: 10.0.1.254

if the host or piece of equiptment is reachable accross the network

yes using IP and MAC we can track the location & area & which site & which page and all. using IP we track.

Mesh Topology... though if you use a beefy-enough machine in the middle, a Star topology might work.

it does not support poe

Quarantined computer

The internal ip address (usually looking something like this 192.168.x.xxx) is the unique number that devices use to identify themselves on a network

The external ip address is the ip address that is broadcasted to every website you visit and every person you email. It is unique (opposed to an internal ip address) it is also the only type of ip address that can approximately located.

So to answer your question, an internal ip address is a unique number that all devices on an IP network use to identify themselves, but it is only unique on your network. An external ip address is the unique number that devices use to identify themselves to the world and this can sometimes yield their location.

routers

43 bit

No, you can not directly download an .iso or .cso file with a DVB card. Usually, downloads with a DVB card produce files of the DVB format which have the extension .dvb.

There generally r 2 com ports, com1 and com2. They are RS232 ports which r serial ports.one way to communicate between 2 PCs is to use a software called hyperterminal..its there in evry computer.( accessories-> communication tools). if not u can also install it. u can find more information on it online..in case..1> u can either use an RS232 to IR converter device connected to the respective ports of both the comps to communicate.u'l be usin IR communication in dis case.2> u can connect a cable between these two ports of both the comps( female-female...as RS232 is a male port).but ure comps wud need to b in close proximity for a physical connection like dis.

u can get back to me for any further clarification on the same.

mother india..... (**********) i am still luking 4 the answer

If you can get onto a computer's network, then yes. From there you must bypass their security programs and firewall. It's not easy for script buddies but for professionals it's like breathing.

Cat6 cable is very similar to Cat5e cable. It is, simply put, just held to a stricter standard than Cat5e cable. Since Cat6 is made to a higher standard than Cat5e it will support higher speed transfers. Cat5e cable can be used for networks up to a 1Gbps speed while Cat6 is currently rated for up to 10Gbps speed. Cat7 takes this even further and supports 40Gbps. For normal usage on networks up to 1Gbps and no run being longer than 100 meters, Cat5e is completely sufficient for the network. To ensure forwards compatibility it may be worthwhile to install Cat6 cable while you're at it so you don't hit a speed cap in your network down the road.

10BASE-T and all the generations of Ethernet Technologies released after 10BASE-T support full duplex. Full duplex mode allows two nodes on a network to communicate with each other simultaneously.

Generally speaking, RG6U can replace 5C-2V coaxial cable because these are cables with very similar characteristics.

RG6U cable is even better because it has lesser attenuation than 5C-2V. So you can without a doubt use this cable if you're replacing cable for your TV.

The Internet Engineering Task Force (IETF) is a large open international community of network designers, operators, vendors, and researchers concerned with the evolution of the Internet architecture and the smooth operation of the Internet. It is open to any interested individual.

NO. In a true peer to peer there is no server.

Conversation Multiplexing

Segmentation and Rassembly

Error Checking

3000 Hz

PoE

It's hard to speculate about the problem, but DHCP has three methods how IP might be assigned to he machine. Manual (You set which machine which IP has), Dynamic (When you machine asks for IP and it gets from free IP pool and it can ask every time the same IP, extend it's usage. In this case you might loose your IP and you will get different one.) and Automatic (DHCP sets IP to machine permanently, it uses MAC-IP relation. Changing the MAC, might change your IP).

Sure, there are several. What you're wanting to do is called an "NS Lookup." Here's a site for example: http://centralops.net/co/

As most things on IOS, show is the way to go.

When you do show version, the last line will tell you the current value of the configuration register. Sample output below.


Router#show version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(5), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Wed 25-Oct-00 05:18 by cmong
Image text-base: 0x03071DB0, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Router uptime is 7 minutes
System returned to ROM by reload
System image file is "flash:c2500-js-l_121-5.bin"
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 03867477, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102

It stores and exchanges data with other machines. Thus minimum two participants are required to exchange information. A clients would request for the information and the server will have the information stored on it.