What reports are available in the routing list module?
Routing list list and delegated authorities list
Difference between RPC model and client-server model?
ponka le lo...
school mie kuch nae parhty kiya :@
Can one connect a Linux computer direct to a windows one?
If by "direct" you mean "with no router", then yes. You will need an Ethernet crossover cable, and to manually configure the Ethernet IP address. Set one as 192.168.0.1 and the other as 192.168.0.2. Set the default gateway to the other computer's IP address. You will then just need to set up file sharing services like Samba or NFS, and you can transfer files between them.
An Uplink Port is a port on a connectivity device, such as a hub or switch, used to connect it to another connectivity device.
How does the network switch affect the connection speed?
That depends on a few things. Be a bit more specific.
How are vtp messages sent between switches in a domain?
Layer 2 multicast. vtp is stopped at the router.
What is the average key size of a strong encryption system in use today?
Web-based SSL has standardized on 128 bits as of late 2004
What is the most common type connector used with coaxial cable on at ThinNet Ethernet network?
BNC connecter
A subnet mask is something that divides the IP address into a host and network. It is a very confusing thing but it will also let you see the IP address of the user.
How do you use bag mask on infant?
BAG MASK! Are you talking about putting a bag over a baby's head?! You could suffocate the baby. Someone should report you to CPS.
Which class of id address provide a maximum of only 254 host addresses per network id?
Class C network
How do you find your dhcp server id?
You haven't indicated what operating system you are using. For windows, using the 'ipconfig /all' command will show you what the DHCP server address is.
This occurs when two or more computers on the same LAN network end up with the same IP address. When this occurs, both computers end up not being able to connect to network.There are a few ways in which this problem can be fixed.If it is Static IP request your ISP for a change of IP.If it is a Dynamic IP you can try resetting your modem by switching ON and OFF the modem or open the command prompt and type "ipconfig /release," which dumps the automatic address it had, and then "ipconfig /renew," which gets a new address.To check for the change in IP you can visit Ip-details.com which gives your public Ip when you visit the site.
The Internet
What hosts devices would you still need static addresses?
Static addresses are usually used for devices that are not mobile and need to be connected to a DNS name. That would be routers, gateways, web servers, DNS servers, printers, email servers, etc.
What is the network address of subnet ID 6?
Since you haven't given a starting network address or subnet mask, impossible to say.
VTY line mode
How do you gain access on school computers without using Proxy Servers?
go to instructibles.com it will tell u
A "hand router" is a woodworking tool. It is used for making special cuts in wood, such as dadoes, or the facing of moldings. Routers use "bits", similar to drills, and depending on the size and shape of the bit, the router can be used to create a wide variety of cuts.
Fault tolerance.
How do you install and configure exchange server 2007?
kindly refer to the link
http://www.commodore.ca/windows/exchange/how_to_setup_exchange_2007_in_2hours.htm