Electronics Engineering

it is noninverting and while it gives no voltage gain it gives a large current gain.

Your question is very muddled and it is difficult to understand exactly what you are asking.

Something is in "series" if it is connected in the circuit as a "daisy chain". Thus both loads AND batteries may be placed in series.

Crimson Dynamo is a fictional character and supervillain in the Marvel Comics universe, primarily associated with Iron Man. Created by writer Stan Lee and artist Don Heck, the character first appeared in "Tales of Suspense" #46 in 1963. The Crimson Dynamo is often depicted as a Russian armored adversary, utilizing advanced technology and weaponry, and has been portrayed by various characters over the years, each taking on the mantle. The character embodies themes of Cold War tensions and has been both an enemy and an occasional ally to Iron Man.

One person's interference is another person's signal ... literally. For example, in ordinary AM radio, signals on the same frequency as a local station, but coming from another city some distance away, may cause background sounds that make listening to the station difficult or unpleasant. In other cases, transmitters emit 'harmonics' of their intended radio signal, which overlay carriers on other frequencies producing a similar effect. There are many other causes and sources of interference. Noise is another matter however, although it also 'interferes' with the operation of systems. Ordinarily, noise is no one else's signal, that is, it does not carry any information. Sources of noise include automobile ignition systems, electric motors, and the Sun, among many other things. The result is the same as far as the signal of interest is concerned however - both noise and interference cause problems receiving the desired signal properly, whether by causing objectionable sounds in the background of a radio program, 'snow' on a (non-digital) TV display, or errors in digital reception or data transmission (which can cause the complete loss of a digital TV signal for example). Noise and interference are also problems in systems where there is no intent to transmit or receive a radio carrier. For example, in computer systems, traces on circuit boards or in cables move data from one place to another in order to carry out the functions of the system. When traces are placed next to each other over (relatively) long distances on the circuit board or in a cable, the impulses can couple into the adjacent traces causing errors in the data transferred, such as corruption of data files or malfunctions of programs. In this example, the source of the problem is technically 'interference', but noise can also occur within systems, for example from a defective power supply or a poor contact in a connector. Many techniques are widely used to avoid the problems of noise and interference, including shielding, twisted pair wiring, FM and PM modulation, and forward error correction (FEC) among others. --- Very lengthy explanation of something very simple, NOISE INTERFERENCE is really unwanted signals introduced by noisy parts. Interference, however, may come from radio, tv, magnetics, and many other sources, including blocking of the signals. --- (See discussion)

A buffer register is the simplest kind of register; all it does is store a digital information temporarily. It holds the contents of the memory which are to be transferred from memory to other components. By acting as a buffer, it allows the central processor and memory units to operate independently without being affected by minor differences in operation.

See the related link for more information.

The current in a reading lamp would be a small part of the total current in a home. For example, a home may have 100 amp service, while a reading light may draw less than 1 amp, so about 1% of the total.

When Jockey is pressed the length of conductor increases due to elasticity. Since resistance is proportional to length the resistance of the conductor also increases. So the voltage drop per unit length alters from its standard value. It causes error in our reading.

The energy used to power a computer is Electrical Energy.

No, lower bandwidth does not mean more data transmission. In fact, lower bandwidth typically results in a reduced capacity to transmit data, as it refers to the maximum rate of data transfer over a network. Higher bandwidth allows for more data to be transmitted simultaneously, while lower bandwidth can lead to slower speeds and potential data congestion.

1 Gigabyte (1GB)

http://www.industrycommunity.com/myforum/re_rogers/messages/261.html

it will be no DC not unless diodes and capacitors are applied. rephrase the question

Co-planar means being in the same plane.

no stablestate

Intel AMD

12 volt

70.7

Trains use DC currents!

It's predominantly AC now but more dc in the early days. Both still in use. See DC and AC section below article-

dsd

Spanish for no

It is simple - An input image is subsampled in the same way - the only difference is that a smoothing kernel one might use, which is {gaussian, laplacian, or gabor kernel}. Hope this helps!

hii i am jaykishan from rajkot

magic tee used as power combiner and power divider

it used as isolator too

If it's indoors you would go to the local electronics store (i.e. radio-shack) And pick up two RG-59 cable ends and a barrel connector (sometimes called a coupling) Just put an end on each piece of cable, they will come with instructions, and then screw them together with the barrel.

You can also use wire nuts but it may cut down on the quality of the signal. Just strip off some of the outer sheath, and then a bit of the inner sheath. Twist the center copper wires together, and then twist the outer shield (silver mesh) together making sure that the copper wires don't touch the silver. If they do touch it won't do any harm, but it won't work.