Flooring

woven vinyl flooring is new flooring created by pvc, which is ecological, waterproof, fire resistent etc,

theflooring.pro

Matt tiles are light in weight and easier to install & care. These tiles look extremely good on accent walls and backsplashes, especially when subjected to light, whether natural or artificial. These tiles can be cleaned using a cleaning solution, a cleaning cloth, and warm water.

More Info - Alice tiles dot com per

Rug

Forty five 80 pound bags of cement are needed to make one cubic yard of concrete.

Solid Vinyl is the thick form of a vinyl sheet that provides many opportunities to

use in innovative ways. Many businesses use it for promotional purposes, as

numerous are manufactured with this material. Such as tiles, flooring mats,

stickers, banners, and many others. This sheet is easily printable, so

manufacturers give it different designs depending upon their requirements.

These materials are great for indoor as well as outdoor use. This is because

they are waterproof. That means printing stays for a long time on them. Not

only this, but they can resist extreme weather conditions as well.

devide by 9

since 12"X12" is inches, we convert that to feet meaning 1'X1'

238 sq feet of floor is the same as 238 tiles at 1 sq ft each.

I assume that the 12 before 12X12 in your question is how many tiles in a box. You will need to divide 238 by the number of tiles per box.

So 238/12 is how you get the to the final answer; 19.8 boxes. We round UP to the next nearest box to cover breakages and funny cuts.

it is 2012 house cost and food are up! People I charge 2.00 a sqft and get it!

FRP material is Fiber Reinforced Plastic or sometimes known as Fibre Reinforced Plastic. It is a water and bacteria resistant wall panel used anywhere sanitary conditions are desired.

9

Costs vary by geographic location.

there are steamers that will remove the wax from floors. you can buy or rent them.

How much does it cost to install a central air conditioner per sq foot

No. Generally wood flooring needs to be nailed down. You may be able to get away with installing a floating laminate floor over the tile, but I would check with the maker of the laminate floor for it's installation recommendations. Obviously a flat surface would be ideal.

Yes but not directly. You will have to include a self leveling underlayment. Engineered wood can be installed over a self leveling underlayment with adhesive.

It is possible but I would not reccomend it. If possible remove the old tile before laying the new tile. If you want to avoid removing the old tile you can lay a cement board over the old tile before installing the new tile.

224*12*12= 32256

32256/169=190.87

you need minimum 191 13x13 tiles

Depending on the tilesetter, but typically a couple days. The floor needs to be prepared and if there was any patching it may need to dry. The tilesetter may want to come back the next day. Then the tile needs to be set and if the tilesetter has good tools that should only take an hour or two. Then the mortar needs to set before the tilesetter can do the grout. Grouting should take most of a day since the grout needs to cure while it is being cleaned. You should not walk on the tile while the grout is setting up and sealing the grout should wait for a few days. The time involved isn't so much a funciton of the size of the tile job, but more a function of the mortar and grout setting times.

characteristics difference in granolithic floor finishes

._. dappenz on how mch the area of the floor is realy i would put about a gallon if i were mopping my kitchen.

do you mean 12"x12"? if so 400+3%waste for cuts = 412..so 10 boxes.

I don't think it's a great idea. The pizza stones I have seen are a different kind of clay and do not have a glazed finish.

20" = 2.78 square feet.

Now divide the area of the tiles into the area of the room.

140/2.78 = 51 tiles

That depends on how well supported the floor is and that depends on how far apart the joists are placed. The closer they are, the more weight can be supported.

Because home made floor wax is higher quality.

Stripping and waxing VCT can cost anywhere between 20-30 cents per square foot depending on the condition of the floor. To scrub and recoat costs about 15-20 cents per square foot.