Flooring

Wood is a better insulator than ceramic tiles and therefore retains heat longer, making it feel warmer to bare feet. Additionally, wood does not conduct heat as quickly as ceramic tiles, which also contributes to the perceived difference in warmth.

You can typically remove adhesive from linoleum by soaking a cloth in warm, soapy water and placing it over the adhesive to soften it. Once softened, gently scrape the adhesive off using a plastic scraper or putty knife. Avoid using harsh chemicals that may damage the linoleum.

A marble floor feels hotter in summer than a carpeted floor because marble conducts heat. Since the heat gets trapped, it travels to the rest of floor raising the temperature. Carpet does not conduct much heat due to tiny holes that allow air ventilation.

travertine is a natural stone similar to a marble. Natural stone can be polished using several different abrasive and chemical techniques to develop reflection of light.for more information visit Bakers Travertine Power Clean

Yes, according to Newton's third law of motion, the floor exerts an equal and opposite force against your feet when you stand on it. This upward force is what supports your weight and prevents you from falling.

Moisture could be causing the wood to swell and if the flooring cannot expand outward it has to go up. Another possibility is dirt getting into the joints between the boards and, like the moisture problem above, the flooring expands.

Moisture..........water......high humidity. Warping (or cupping) is usually moisture from underneath. A moisture meter can help determine where it may be coming from. Water leaks behind a frig, pipe leaks or just a damp crawl space are just a few causes. Once you've found whats causing it you can deal with it.

Now a crowning floor is usually cause by to much moisture on the surface (i.e. flooding of a floor or to much water used during mopping). A corrective measure may be a dehumidifier on the opposite side of the cup. It'll take some time but this is a cheaper measure then floor replacement. But once a floor has buckled it's almost a lost cause. Have a flooring specialist of contractor take a look at it before it's to late.

Hope this help.

John

To clean yellow stains off linoleum floors, mix a solution of equal parts water and white vinegar. Apply the solution to the stained areas and let it sit for a few minutes before scrubbing with a soft-bristled brush or cloth. Rinse the area thoroughly with clean water and dry it completely.

Possible can of worms there! Generally, sweat is caused by the meeting of two tempertures that are carrying with them different humidity levels. Sometimes the problem is made worse because the concrete and the walls sometimes have dirt around them (Basement underground) and the hydrostatic presure of the water forces itself through the concrete and walls (which is usually a lot cooler than the outside air). Now introduce warm air in the room, contacting the cold floor. Sometimes, the introduction of a de-humidifier and the movement of air (fan), will take care of the problem. But the movement of water vapor in concrete is a slow process, so give the fan(s) de-humidifiers a couple of weeks to work the water out of all the concrete and building materials before you start looking for a problem that might be a little worse!

Any acidic cleaner should work. This category would include both vinegar (acetic acid) and commercial lime dissolving solutions (muriatic acid, K2R, Lime Away, etc.). Wear gloves, don't get cleaner under your rings, sponge off with water to preserve your grout after removing lime.



I would use nothing stronger than white vinegar. Anything stronger will destroy the grout.

YOU DON'T! Let a pro do it. People don't realize how specialized this procedure is. Chemicals can work for you or against you if you aren't familiar with them. You could also do damage that you would then have to call a pro in to fix. Get it right the 1st time. It will be cost efficient.

Tile floors are cold because they have high thermal conductivity, meaning they can rapidly transfer heat away from your body. Unlike materials like carpet or wood, which provide some insulation, tile does not retain heat well, making it feel colder to the touch. Additionally, tile floors can feel colder in winter due to the temperature difference between the floor and the heated indoor air.

First, do NOT wax laminate floors in the first place! They are not supposed to be waxed.

However, if you are in a situation like I am, namely the previous owners waxed your laminate and now it looks awful, you can try scraping the wax up with a credit card or store "club" card, or hitting it with a hot blow-dryer and wiping with paper towels. == Ammonia water will help dissolve and remove the wax. We used to do this periodically on our old-style asbestos tile. Works well and then you can clean as usual. It may take several tries to get it right. I also used Mop and Glow, which yellowed like wax, so this works to remove that, too.

I also used the solution provided by Eric and www.fixmyfloors.com he gave great advice and saved me a bundle.

petrol with an acid (lemon or vinegar or battery acid) in it will soften the silicon. (break some of the bonds) talcum powder will abraid it if you rub it in with something soft (finger-tip). hope this helps. Don't sand it. or use anything that's harder than the surface or you will leave some marks.

Use Goop or Goof-off available from Home Depot or any hardware store. If you don't want to use a chemical (although ceramic tile is very tough stuff) you could first try rubbing the area with baby oil. I suggest you try it on an area that isn't in the middle of your floor first to make sure that nothing bad happens in a visible area.

Answer Take a warm iron and some paper toweling and put the toweling down, hold the iron over it briefly and keep doing this until the wax gets warm and bleeds into the toweling. Be careful the iron is not too hot! Then take a light grid piece of sandpaper and lightly go back and forth on the red stain length-wise (do not press too hard) until the dye is out. After the dye is gone you can use a paste wax to bring up the shine.

Answer Try an ice cube on the wax to freeze it and then try scraping it off with a putty knife or razor blade. Use light pressure while doing this. (My concern is that, by heating the wax, some of the dye may work into the flooring.)

goo gone

My kids left a sap trail on my hardwood through out the house so I used Non stick cooking spray. Spray on sap and clean off with a rag or paper towel. Be sure to clean your floors with whatever you usually use to get the oil residue off. Worked like a charm!

Try an ice cube to freeze it and then scrape it off. If that doesn't work, then rubbing it with margarine or ammonia (windex) may do the trick. These work well for wax and tar. * Try a scraping most of the sap away with a credit card or equivalent then apply a little 'Skin So Soft' by Avon rub with a clean cloth.

Kerosene, Turpentine, or Mineral Sprits will disolve tree sap and tar.

Hey there! Congratulations on your decision to construct a new home! When it comes to flooring options like marble, granite, and tiles, it depends on your personal preferences and the vibe you want to create in your space.

Let me share a little story from my own experience. When I was building my dream home, I spent ages trying to decide between marble, granite, and tiles for the flooring. After much deliberation and countless Pinterest boards, I finally settled on marble. Marble flooring adds a touch of timeless elegance to any room and instantly elevates the overall aesthetic. Plus, it's surprisingly easy to clean and maintain, which is a huge bonus for busy folks like us.

That being said, granite and tiles also have their unique advantages. Granite is incredibly durable and can withstand heavy foot traffic, making it ideal for high-traffic areas like entryways and kitchens. On the other hand, tiles offer endless versatility in terms of colors, patterns, and textures, allowing you to unleash your creativity and customize your flooring to suit your style. Ultimately, it boils down to your individual preferences, budget, and the specific needs of your home. So take your time, weigh your options, and choose the flooring that speaks to you and your vision for your dream home!

The simplest way to figure out if an old tile has asbestos is to send a sample to an asbestos testing center. Use caution when collecting a sample as inhaling of asbestos particles has known to cause cancer.

A title held by local leaders in the area could have been "village chief" or "tribal elder." These roles were often responsible for governing and making decisions for the community.

Asbestos was last used in floor tiles in the late 1980s before being largely discontinued due to health concerns linked to asbestos exposure. Since then, alternative materials have been used in the production of floor tiles.

The floor of a synagogue is typically covered with carpet or hardwood flooring. It may also have tiles or a traditional rug called a "Bimah."