Home Theater

No, a S/PDIF is, by definition, a Sony / Phillips Digital Interconnect Format connector, and is always a digital signal. It is usually connected by an RCA cable, and can be carried by cable specified for analog use, but digital cable is better.

If it's not a LCD/DLP or plasma set (you didn't specify) it's probably because the green CRT is getting weak and can't maintain focus or your convergence amplifiers have taken a turn for the worse.

It is a branch of engineering which involves Mechanical,Electronics,Instrumentation and Control Engineering. An example for Mechatronics application is the Antilock brakes used in cars where The speed of each wheel is sensed and controlled braking is implemented.

coaxial cable is what most (all) cable providers use

It depends on your choice as both sony and Phillips are good companies. Both are having good market value and also they use the latest technologies in there products. So it is your opinion to choose whom from these two.

HDMI cable is characterized by its performance rather than the lay up of the individual cables. The choice of a specific wire gauge makes no difference to the effectiveness of the cable. An approved and licensed HDMI cable will work flawlessly if it connected to licensed HDMI outputs and inputs.

On the same note, expensive HDMI cables cannot deliver better quality images than cheap ones. The nature of HDMI signals means that the signal is either properly received by a television or not. There is no gradual loss of quality before the signal fails.

Check the previous 2 answers.

A micro projector works by taking an image, scanning it, and then resizing it to the desired size. This is actually really how all of the projectors work.

Use an exact 50/50 mix of White Vinegar and Distilled Water. Do not use tap water. Turn the TV off and wait for it to cool. Spray the solution on a soft fiber cloth and gently wipe the screen in a circular motion. Never use any paper product. If the solution runs you are using too much. Be very gentle and do not press on the screen. After you are done wait for the screen to completely dry before turning it back on. Remember an LCD screen is not glass but is plastic and will scratch easily.

You can go wireless, but you will have to buy wireless speakers. There is no current way of upgrading from wired to wireless and keeping the same speakers. The only way I can imagine is to buy some wireless speakers and then dismantle those and add the pieces to the old wired speakers, the ideal outcome, making them wireless and using the same good quality speakers that came with the stereo.

To use analog 3.5 mm jack RCA cables and the PS4 optical audio cable, you will need a DAC; then your Logitech speakers should work.

There is no 'correct height' in a bedroom. If you are hoping to watch TV laying on the bed, lie in your most comfortable position, propped by pillows or however you want and then look at the wall. Wherever it is most comfortable is where the TV should be. If you are going to sit on your bed or chair, use the same rule as for a living room; the TV's center should be at eye level.

One of the first four track machines for home use was the Tandberg model 5 which was launched in 1958 . They didn't become mainstream until the early 1960's.

You can find consumer reviews for surrround sound home theater systems at these websites - Consumer Reports online, Energy Star, THX Home Audio Buyer Guide, The Wirecutter.

The best digital audio to analog audio converter is a personal opinion and is subjective to each persons preference. However, overall the the best rated product is HDE.

Connect the audio output of the cable box to the input of the home theater system. If both systems have digital connectors, use them.

The better you can mount a flat screen TV, the better for your TV. Hitting the wall studs is always a preferred choice. Just hanging a set through the dry wall or plaster is inviting a catastrophe later. ---- NO. The wall mount TV bracket does not need to be centered on a stud. Wall mount TV brackets are designed to allow you to install the TV just about anywhere on the wall of your choice. There are many mounting holes on these brackets so even if your bracket is not centered with a stud, you should still be able to hit a stud or two with the holes provided on your mount. If you live in the Connecticut area, Streamline Home Theaters can properly mount your tv bracket and conceil all your wires inside the wall at a very reasonable price check out their website for details www.streamlinehdstore.com

An amplifier that is rated to drive a 16 ohm load will not perform well if a 4 ohm load is applied to it. The output rating is calculated to allow the highest power output from the amplifier. If a 4 ohm speaker is used instead of the recommended 16 ohm speaker, the current output will be far higher for a given output voltage.

Although the amplifier will drive the speaker at low levels, as the volume is increased, the output current may rise to the point where it will damage output transistors or perhaps the main power supply. Some 16 ohm rated amplifiers may well handle 4 ohm speakers without damage but the only way to find out is to try it - meaning a dead amplifier if the test isn't successful.

So, just like my previous answer (what happened to it?), the answer is YES but not as well.

Some suggestions: Go to drama school and be the best in your group Join some dramatic societies and build up a portfolio Learn to sing and dance Get yourself a good agent Develop a great portfolio Seek every audition and go to them. If you do all of the above and persevere for 5 or 10 years, then maybe, just maybe, you might get yourself a feature role or two. If you are asking this question, it amost certainly means you aren't ready to take on the role right now. Good luck

There are many variations of surround sound receivers but most will have at least some of the elements listed below:

Input selector - allows multiple audio and video inputs to be connected and selected one at a a time. Audio is passed on to the nest stages while the video is normally returned to a video output to drive a television input.

Audio extractor - HDMI signals carry video and audio. An audio extractor is used to obtain the audio element to pass on to later stages of the signal chain.

Audio processor - the device that decodes incoming signals to the separate signals needed to drive each speaker. Additional processing may add delays to some or all of the signals to assist with lip syncing to the image as well as to assist in the the surround sound set up.

Audio equaliser - adjustments for low, mid and high frequencies. It can be two, three, seven or perhaps 15 bands depending on the model.

Power amplifier - the part that takes low level signals and amplifies them ready to drive the loudspeakers.

The cheapest full HD (1080p) projector today is the Vivitek H1080FD. It is available online for as little as $800.00.

Be careful when comparing projectors. You need to check the native resolution of the display (which must be at least 1080p), not the ability to handle 1080p signals. All the cheaper projectors with '1080p compatibility' downsample the resolution to as little as 480i to display, which is not HD.

There are no surround modes that quickly turn off the subwoofer, center channel and surround back speakers, but leave the surround speakers (side) speakers on. You will need to go into the System Setup -> Sp 2. In 3.0p -> Speaker Setup menu to select Center Speaker 'None', Surround Speaker ('Large' or 'Small'), Surround Back Speaker 'None' and Subwoofer 'No'. If you have a subwoofer and want sound to come out of the all of the speakers when you are listening to a non-surround source such as a CD, use the 5CH/7CH Stereo DSP simulation.

Yes, as long as the DVI display supports HDCP (High Definition Content Protection).

One can purchase an A40 surround sound system from many places. These places sell a variety of things, electronics included. These stores include Walmart and Best Buy. However one could also purchase it online, through Amazon.

The company Chief is known for manufacturing projector mounts. Chief is an industry leader when it comes to TV mounts, monitor mounts, projector mounts, interactive mounts, and racks.