0
Home Theater
Also known as home cinema, the home theater is built to imitate (or surpass) the commercial theater experience and performance with the help of the latest state-of-the-art audio and video entertainment equipment.
2,043 Questions
It seems like you are describing a SCART lead, otherwise known as a PERITEL connector, used in Europe but not the USA.
The more modern example would be the HDMI cable.
Your TV has a problem. If you watch the flashing red light and count the blinks, it's actually flashing a trouble code. Maybe something like four blinks, followed by three and then repeating. The other possibility is that it's in timer mode and the flashing light is reminding you that the timer's been set.
How do you convert spdif into rca stereo?
SPDIF is a digital audio interface and is designed to transfer audio from one device to another without converting the signal to analog. Eventually, the signal will become analog as the speakers require an analog signal. to work.
Almost all audio devices that have a SPDIF output also have an analog output so rather than buying a SPDIF to analog converter, use an existing analog output. If the device with the digital output doesn't have an analog output, then you don't have much choice about buying a converter unit. The converter is an active device so don't expect to find a simple converter cable. They don't cost a lot and they can be obtained from many specialist electronics stores. Good starting points are Radio Shack in the US or Maplin in the UK
Where to find a Optoma Phoenix SHP180W replacement projector bulb?
If you haven't found one searching on the Web, I would recommend contacting Optoma Customer Service, and they should direct you to a source with a replacement lamp.
Surround Sound with Wireless Speakers?
Wireless speakers can offer a great way to enjoy your music without worrying about placing unsightly wires all over your home or office. Perfect for a surround sound system or stereo set up, wireless speakers can give a full, rich sound. When shopping for wireless speakers, care should be taken to look at the quality of manufacturing, what wireless method is used for transmitting the audio, and any power needs. Some wireless speakers need to be plugged in to a wall outlet, which may cause some problems if you are trying to avoid wires. Wireless speakers offer a great benefit once installed.
Call up customer service.
Why can you hear the buzzing of your TV from far away but no one else can?
You have good hearing. Most TV's (tube type) will emit a 60 hz. buzz as well as a 15,734 hz. whine from the set. The loudness varies from manufacturer to manufacturer and age can also be a contributing factor.
It seems that once someone `tunes in' to these noises, they are always aware of them from that point on. Personally, I can't go into a store that has a lot of TV's running because the noise eminating from them becomes piercing to my ears, and after a few minutes I have to leave or deal with a splitting headache if I've been exposed long enough.
You aren't hearing things. Those noises are there with tube type TV's, and the LCD/plasma TV's have a set of noises all their own too.
If you can, just ignore them. It IS normal and usually nothing to worry about. Hopefully, the program you're watching is interesting enough (yes, I know THAT'S RARE these days) to distract your attention away from the noises.
Can a Mac make a home theater computer?
YEs you can because you just load a DVD into the computer and then you can watch it in full screen easily. If you want to listen to music on a mac it is easy. You can do anything on a mac so if you better start using it or else you'll never learn everything there is to a mac.
SUFFA MC baby you know me HCP 4 lifeBIg up Riot Oner
HCP the deadliest Indian gang in the world.Sourav MAximus Ghandi
watch out they will get you
Why does the View Sonic PJ400 projector Lamp light blink but the projector will not turn on?
Whenever most projectors flash the lamp status light, but nothing happens, it is usually a circuit board issue.
I personally have had the same issue before. The lamp was brand new, but it turned out being the projector and not the lamp.
If, however, it may not be a circuit board issue, it could be your lamp. If you have used your lamp over 1000 hours, it's probably it.
Contact ViewSonic Customer Service to schedule a repair, or to get price quotes.
How do you have a balance audio and bass?
Not much info in you question but Good Speakers connected to a 100 watt amplifier will improve the average sound system, speakers are the weakest link in the sound system so you should put most of your money there.
How do I repair a video projector?
There is a great website that can help you with the repairing of your video projector. Go to www.howtomendit.com to find answers and tips on video repair.
How does one use a digital audio recorder?
A digital audio recorder can be used by someone to record conversations or to take dictation. The recordings can be uploaded to a computer after being made.
Can you link your Bose speakers to your Samsung D5000 tv without a home cinema receiver?
Unless your Bose speakers have an optical digital input, no. There is no audio outputs or speaker outputs on this TV except for optical.
How expensive are wireless surround sound systems?
A wireless surround sound system can be very expensive, depending on your needs and preferences. The prices can range anywhere from $250 upwards to $700 and $800.
What are the advantages of using a surround sound amplifier?
The main advantage of using a surround sound amplifier is to boost the sound quality of ones television. Programs sound better, and movies sound as if one is in the theatre watching the film.
How do you connect your Advent AW 400 wireless stereo speakers?
The AW400 wireless speakers have a transmitter module. This module is plugged into your sound source (your TV or stereo or whatever). Each of the speakers is then plugged into the wall with its own power cord.
How do you connect your DVD player to your cox cable digital box?
Both of there devices are output units. Each one should be connected to your TV into different inputs. Like video 1 and video 2. then use your TV's video selector button to select which you want to watch.
The first television transmission to the public was located where and when?
The first public broadcast of television was in 1929 by the BBC from their new television studios in Crystal Palace, London. The system was based on John Logie Baird's television first shown to the public in 1925. The system was an electro-mechanical one and used a rotating disc to assist in creating the 30 line image. The system lasted for 5 years at which time the BBC adopted a fully electronic system for the first time.
Also in 1929, Philo Farnsworth demonstrated the first fully electronic system. His previous demonstrations in 1927 were electro-mechanical like the Baird system. Legal battles dogged those involved in development of television in the US and public broadcasts in America were only started in 1939. When it started, it was a fully electronic system based on Farnsworth's work.
How do you install a image audio concepts IA-9901?
Connect speaker cables to your receiver. Note that the subwoofer in this system is not powered, so you will need an amp that can power the subwoofer too.
A 2008 Nissan Altima has 6 speakers, 2 in the dash, 2 in the door, and 2 in the rear deck.
What size screw do you use to mount a westinghouse 32 inch led tv?
A Westinghouse 32 inch TV should be mounted to the wall with a half inch screw. A larger screw can be used, if available.
Surround system installation from satellite receiver to stereo?
From the question it sounds like you would like to hook multiple components to one surround system. For that you would need an A/V selector ($20 - $40).
---- Setting up a surround system using an A/V selector with multiple components (RCA)
1.) Connect all components to the selectors inputs. This requires RCA (Yellow/Red/White) cables from each of the devices. Connecting the video and audio into the ports that you would like (i.e. 1,2,3,4).
2.) Find the output from the selector. Take the Video (Yellow) and connect it from the output on the selector to the input on the television/monitor. Then attach the audio (Red/White) from the selector into the surround system.
3.) To use a device, turn it on and then select it's appropriate number on the selector and it will switch the audio/video to the TV and sound system.
This same setup will work for any type of audio/video hookups granted the selector must be changed to support the types (i.e. Component, S-Video, VGA, HDMI)
You just plug you tv in to the poroject with A/V cables (red, yellow, white) also called composite, Component HD (red, green, blue) or Svideo. You can get cable coax to svideo conectors if needed. Once connected turn on tv source be it cable box direct cable or antena (?) then turn on your projector and go through the input selection until your tv shows up on the Screen. Of course if you know what input method you have your TV pluged into just select that. If it doesn't show up check cables and repeat.
