0
Lexus ES
The Lexus ES series is a line of middle-sized luxury sedans manufactured by Lexus from 1989 to present. The series is patterned on the Toyota Camry platform and features an automatic transmission, V6 engine and front-wheel drive.
1,090 Questions
How do you replace the power antenna on a 1994 Lexus ES 300?
You might want to try this site, it helped me. http://www.carstereohelp.com/stereoremovalLexusES300PwrAnt.htm
How many horsepower does the engine in the 2013 Lexus ES-300H have?
The 2013 Lexus ES-300H's engine produces 200 hp @ 5700 rpm.
Where can you find replacement Lexus ES300 key battery?
Open the key case with a jeweler's Philips screwdriver. Remove the back cover. Use the Philips driver to remove the two screws that you now see. Remove the battery cover. My key uses a button battery: CR 1616. Note tyhe battery you need and buy a new one (RS store is a good place). Use a jeweler's flat blade to lift the battery up and slide out. Replace with a new battery and reassemble.
How do you replace rear main oil seal on 2000 Lexus ES300?
you need to remove the engine and tranny togheter then you need to change the seal its agood idea to change every seal while the engines out ,,,that is if your going to keep the car for more info on this you can contack me tozkara@exetel.com.au
What does a seized brake caliper cause?
From my understanding it causes that one wheel to have the breaks constantly applied. So the pad is constantly dragging on the rotor. Once the pad is gone, it's metal on metal.
The main hazard is that your brake rotor will overheat. This means your brake on that particular wheel will be far less effective and you will have to push the brake pedal much harder to get braking power out of it. The other problem with overheating is that it causes the rotors to warp, which will cause pulsating brakes, and if the warping problem is bad enough, it will also reduce the effectiveness of your brakes significantly.
Basically, driving anywhere with a seized caliper is dangerous. Always make sure your braking system is in perfect working order.
Where is the tensioner pulley on a 1994 Lexus ES 300 and how do the belts come off?
The belt tensioner is right in front of your alternator. You will see a big long screw going down in front of the alternator and to the left and underneath the screw you will see a bolt. Loosen the bolt and then loosen the screw and the belt should come off when you loosen it enough. Just did it not long ago on mine, very simple process.
How do you fix a 99 Lexus ES300 that will not idle on the first try?
remove and clean the idle air control valve( iac ), and or replace unit. located on back of throttle body housing. try this first.
How do you replace tail light bulbs on a 1996 Lexus es 300?
I have a 1997 ES 300 and have changed the tail lamp and brake light bulbs. The 1996 may be slightly different, but I'll try to help. Open the trunk lid and look for access panels behind the appropriate light unit, either on the trunk lid's interior or the left or right-hand inner rear trunk panel. On the 1997, there are molded plastic access panels (covered with trunk fuzz) held in place by velcro strips. Gently pull the panel away and look or feel for the end of the wiring harness that feeds the connectors. There will be a round plastic bulb holder that will come out of the back of the lamp housing with a slight twist. Once the bulb and housing are free, remove the failed bulb by pushing in slightly, twisting, and pulling. Reverse the process to reinstall. Before plugging the new bulb (be sure you use the correct single or double-element part) and housing back into the light housing, make sure the new bulb works correctly. It's also a good idea to wiggle the connector and wiring before removal (with the lights on and someone stepping on the brake pedal) to make sure the problem isn't simply a loose connector. If the connector is tight and a new bulb doesn't work, try plugging it into another lamp connector, which will tell you if the new bulb is good (it should be, but you never know) or if the problem lies elsewhere. The connector's contact points may be corroded, or there's a wiring problem that an auto electrician can repair.
What is the gross vehicle weight of the 2011 Lexus ES-350?
The gross weight of the 2011 Lexus ES-350 is 4680 lbs..
Loose accessory belts (probably alternator or fan). These stop squealing when they get warm. You might need a new belt, or just tightening.
Can you buy unused old model cars from dealers?
Sometimes a dealer will still have unused cars from previous years, but a person generally will have to inquire from each dealer individually.
Lexus ES300 engine is smoking and smells like burning oil what is the problem?
did you forget to re-install the dip stick or the oil filler cap after the last oil change/check? also, did you just have an oil change or anything like that where oil may have poured onto the exhaust system? if none of the above, your valve covers are probably in need of new gaskets...:) also everyone should have a manual for their vehicle, and the library should have a professional manual available...in the reference section, you'll have to make copies of the important sections...good luck :)
How do you replace fuel injector o-ring of Lexus es-300 1996?
Remove the injector and you will see the o-ring.
Where is the timing belt on a 2004 Lexus es 330?
On a 2004 Lexus ES 330 :
The timing belt would be under a cover on the end of the engine that faces
towards the passenger side of the vehicle
How do I change the oil on a Lexus es300?
1) Lift the car.
2) Find the oil pan and locate the drain plug. It is a 14mm bolt head. Drain oil.
3) Depending on the year, 2002 and up its easier the replace the filter from the bottom
--- 3 Clips and 5 10mm screws ---
1992 - 2001 its easier to lower the car and remove the filter from the top.
There will be an opening for the oil to drain, but put a rag down to stop it from leaking onto the mount under it.
---Takes a Toyota D1 filter ---
4) Tighten the drain plug to 25ft. lbs
5) Put 5 qts of 5w/30 oil in and your good.
Where is the fuel cut off for a 2003 Lexus?
Where is the fuel cut off switch located in a 2003 Lexus es300
How do you change the brake lights on a 1998 Lexus ES300?
To change brake light bulbs on a 1998 Lexus ES300, open the trunk lid. Locate the plastic rivet on the side of the trunk liner. Turn the rivet while pushing in with a screwdriver. Remove the rivet and the trunk liner can be pulled away to access the bulb. Push in and turn the bulb to remove. Insert the new bulb the same way. Replace the rivet in the trunk liner.
Why is the brake light on the dash on in your 1996 Lexus es 300?
I have a 1994 Lexus ES300 and when my brake light came on, it meant that one of my brakes lines had busted. Eventually I had NO brakes. Not sure if this would apply to yours. Get it checked out before it is to late.
Where is the oil filter on a 2001 Lexus ES300?
It should be right under the exhaust manifold and in front of the radiator. From the front view its in the middle of the engine.
Does 2000 Lexus es 300 have timing belt or timing chain?
The 3.0 litre V6 engine in a 2000 Lexus ES300 has a timing BELT
How do you reset alarm after battery change in Lexus es300?
Use your remote control to Unlock, Lock and Unlock again. It worked for my case very well.
Where is the starter located on a 2002 Lexus ES300?
remove the air box and the battery. the starter is held by 2 14mm bolts. the main power line is connected by a 12mm nut. there is a 1 wire connector to the solenoid.
