Mechanical Engineering

ambient temp is the outside air temp

probably SAE or ASTM

two

Hunedoara steel works was created in 1884.

by calculating the inlet steam enthalpy-outlet steam enthalpy

we will know the total kcal consumed for output mw

required kcal for 1 kwh=860

now campare this with your turbine kcal for 1kwh

now you came to know how much is your turbine efficiency................................................................................

a screw with closely spread threads

Ether

'This line is filled with ether gas, so if you have ever broken or cut one and get a funny smell or some white fluid on you, don't worry, it is not harmful'.

The 1980 Suzuki key code switch is located near the ignition switch. This is the common location for most older models.

Yes

Class 150 (AKA 150#) refers to the pressure/temperature rating of the valve. That class applies to steel and alloy steel valves. Common classes are 150, 300, 600, 900, 1500, 2500, 4500. There are also interpolated ratings and special classes, which basically are intermediate ratings. For more information click the Related Link shown below.

The act of washing gold from river gravel through the use of a sluice box.

Hydrogen is not a corrosive gas; but the hydrogen absorbed in metals may lead to the formation of metal hydrides and to embrittlement.

See related links for information about sine charts.

you get an average of R100 000 p/m

one of the parts of smokehouse

I believe the primary combustion of air in a standard recriprocating engine is the initial burn of fuel/air in the piston. As the exhaust gases leave the engine, vehicles equiped with EGR (exhaust gas recirculation) have sensors to detect quality of combustion byproducts and feed exhaust back into the piston. This is a second burn.

The fuel feed system refer to those parts which work together to provide a constant supply of fuel to the engine. The basic parts are: Fuel tank, fuel filter, fuel lines and hoses, fuel pump and carburettor or fuel injector. I do not like how the question is phrased though.

Duplex stainless steel are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels. This combination of properties can mean some compromise when compared with pure austenitic and pure ferritic grades.

hi i have a citroen saxo s reg 1.5D and it is knocking like a drive shaft but it dont do it all the time what do u think i should do shall i try a new drive shaft?

1. Define the frontal area of the sign

2. Wind Pressure (lb/sf) = 0.013 x (wind speed mph x 0.45)^2

3. Multiply the frontal area of the sign by wind speed to find the horizontal force (in pounds) concentrated at a point defined by the centroid of the area defined in step 1.

4. With known soil properties, use the maximum stress method developed by Broms or Rutledge. The equation used will vary depending if your soil is granular or cohesive.

There are no set salary rates for craft workers. You are likely to start on about $24,000 (£12,000) a year.

Experienced craft workers earn around $36,000 (£18,000) a year.

Senior workers can earn up to $40,000 (£20,000) a year.

SAE stands for Society of Automative Engineers and HLP 68 is DIN test for hydrulic oil with viscocity of 40. Both should be different.

the heat from the shower causes it to fog and if ur window for the bathroom is small then it takes a while for the air to escape causing the smoke to become traped to your mirror like if u blow your breath towards the mirror then it fogs and also not only your mirror gets foggy but also the floor or wall.thank u very much

During the game, hit ~ and then type either

morehp --- bonus hp

moreall --- bombs

unevery --- unlock everything

god --- auto